1. Safety Information
- Keep the device away from water and excessive moisture.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Use only the provided or a certified Type-C charging cable to prevent damage.
- Ensure the mounting surface is clean and dry before installation to guarantee proper adhesion.
2. Product Overview
The MIXSAS Car Sensor Light is a versatile, automatic induction lamp designed for various applications, including car trunks, closets, and bedside lighting. It features a 3-color LED light source, stepless dimming, and convenient Type-C charging.
Key Features:
- Sensitive Automatic Induction: Lights up when motion is detected, turns off when people leave.
- 3-Color LED Light Source: Offers White Light, Warm Light, and Warm White Light.
- Stepless Dimming: Adjustable brightness from high to low.
- Long-lasting Battery Life: Equipped with a 500mAh battery.
- Type-C Charging: Convenient and universal charging port.
- Removable Light Bar: Flexible and portable for various uses.
- Multi-area Adhesive Installation: Allows for flexible mounting in desired positions.
Package Contents:
- 1 x MIXSAS Car Sensor Light
- 1 x Mounting Base
- 2 x Double-sided Adhesive Tapes
- 1 x Cleaning Kit (Wet & Dry Wipes)
- 1 x 0.3M Type-C Charging Cable
- 1 x Instruction Manual (this document)


3. Setup and Installation
Follow these steps to install your MIXSAS Car Sensor Light:
- Prepare the Surface: Use the included alcohol wipe (Wet and Dry) to thoroughly clean the desired mounting surface. Ensure it is free of oil, dust, and moisture.
- Prepare the Base: Remove the backing from one of the double-sided adhesive tapes and carefully stick it onto the mounting base. The base has two paste areas for flexible installation.
- Attach the Base: Press the base firmly onto the cleaned installation position.
- Allow Adhesion: For optimal adhesion, allow the base to cure for 24 hours before attaching the light unit.
- Install the Light Strip: After 24 hours, align the light strip with the installed base and attach it. The light bar is removable for convenience.


4. Operation
Power On/Off and Induction:
The light features sensitive automatic induction. It will light up when motion is detected within approximately 3 meters and a 90° wide-angle sensing area. The light will automatically extinguish when people leave the sensing range.

Brightness Adjustment (Stepless Dimming):
To adjust the brightness, long-press the power button on the light unit. The brightness will gradually change, allowing you to set it to your preferred level.
Color Switching:
The light offers three color options: White Light, Warm Light, and Warm White Light. To switch between these colors, short-press the power button.

Charging:
The light is equipped with a Type-C charging port. Connect the provided USB-C cable to charge the device. A red light indicates that the device is charging. The light will turn off when fully charged.

Video Demonstration:
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the light. For stubborn dirt, use the provided alcohol wipes or a slightly damp cloth. Do not use abrasive cleaners.
- Charging: Recharge the device when the battery is low to ensure continuous operation. The red charging indicator will turn off when fully charged.
- Storage: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place.
6. Troubleshooting
- Light does not turn on automatically:
- Check if the battery is charged. Connect the light to a power source using the Type-C cable.
- Ensure the sensor is not obstructed and there is clear line of sight for motion detection.
- Verify that the light is within the 3-meter sensing range and 90° wide-angle detection area.
- Test the light in a dark environment, as ambient light might affect sensor activation.
- Light does not dim or change color:
- Ensure you are using the correct button press: long-press for dimming, short-press for color change.
- Recharge the battery, as low power might affect functionality.
- Light falls off after installation:
- Ensure the mounting surface was thoroughly cleaned and dry before applying the adhesive.
- Verify that the base was pressed firmly and allowed to adhere for 24 hours before attaching the light unit.
- Consider using a new piece of double-sided adhesive tape if the original has lost its stickiness.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Mixsas |
| Model Name | 756 757 |
| Item Type | Atmosphere lamp |
| Light Source | LED |
| Material | ABS+PC |
| Special Features | 3-color, Automatic Induction, Stepless Dimming |
| Power Supply Interface | Type-C |
| Battery Capacity | 500mAh |
| High Brightness Duration | 4 hours |
| Low Brightness Duration | 48 hours |
| Charging Time | 2 hours |
| Sensing Distance | Approx. 3 meters |
| Sensing Angle | 90° Wide-angle |
| Light Colors | White Light, Warm Light, Warm White Light |
| Item Weight | 0.12 kg |
| Item Diameter | 11 mm |
| Product Dimensions (Light Unit) | 110mm (Length) x 26mm (Height) x 20mm (Width) |
| Base Width | 55mm |
| Origin | Mainland China |
| Package Length | 10 cm |
| Package Width | 5 cm |
| Package Height | 3 cm |
| Package Weight | 0.23 kg |

8. User Tips
- Initial Charge: It is recommended to fully charge the sensor light before its first use to ensure optimal performance and battery life.
- Sensor Placement: When installing, consider the primary direction of movement to ensure the sensor has an unobstructed view for reliable detection.
- Versatile Use: While ideal for car trunks, this light is also highly effective in home environments such as closets, cabinets, or as a bedside night light.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official product page or contact the seller directly. A PDF version of the user manual is also available for download: Download User Manual (PDF).