1. Safety Information
Please read this section carefully before using the product.
- The edges of the neon sign are quite hard. Please handle with care to avoid scratching your hands.
- Ensure the power source is compatible with the sign's requirements (DC 5V).
- Keep the sign away from water and high humidity to prevent electrical hazards.
- Do not attempt to open or modify the sign, as this may void the warranty and cause damage.
2. Product Overview
The Cowboy Hat Neon Sign is a decorative LED neon light designed for various indoor and outdoor settings. It features a USB power input and adjustable brightness levels.
3. Setup and Installation
-
Unpacking
Gently unpack your neon sign. Carefully remove the protective film and any bubble wraps from the sign before use.
-
Placement
You can hang or fix the neon sign on a wall, or place it on any flat surface. Ensure the chosen location is stable and secure.
-
Power Connection
The sign is USB powered. Connect the USB cable to a compatible power source.
Figure 3: USB Power Connection The USB powered neon sign is compatible with various power sources:
Figure 4: Compatible USB Power Sources (Power bank, Laptop, Adaptor)
4. Operation
-
Power On/Off
Once connected to a power source, turn on the power and then use the integrated switch on the neon sign's cable to turn the sign on or off.
-
Adjusting Brightness
The neon sign features 3 levels of adjustable brightness, ranging from 10% to 100%. Use the control buttons on the cable to adjust the brightness:
- Press to make it brighter (3 levels).
- Press to make it darker (3 levels).
- The on/off switch is also integrated into the control.
Figure 5: Brightness Adjustment Controls
5. Maintenance
-
Cleaning
To clean the neon sign, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or the LED components.
-
Storage
If storing the sign for an extended period, ensure it is clean, dry, and stored in a safe place away from direct sunlight and extreme temperatures.
6. Troubleshooting
-
Sign does not light up:
Check if the USB cable is securely connected to both the sign and the power source. Ensure the power source is active and providing 5V DC. Verify that the on/off switch is in the 'on' position.
-
Brightness not adjusting:
Ensure the control buttons are functioning correctly. Try disconnecting and reconnecting the power to reset the device.
7. Specifications
| Feature | Specification |
|---|---|
| Item Type | Neon Bulbs |
| Power Source | DC (USB Powered, 5V) |
| USB Cable Length | 5.9 Ft / 1.8 m |
| Dimensions (W x H) | 32 cm (12.6 inch) x 36.92 cm (14.54 inch) |
| Color Temperature | <2700K |
| Luminous Flux | <60 |
| Brightness Adjustment | 3 Levels (10% - 100%) |
| Application | Commercial, Indoor, Outdoor |
| Certification | CE |
| Origin | Mainland China |
| High-concerned chemical | None |
8. User Tips
- For best visual effect, place the sign against a dark or contrasting background.
- Consider using a power bank for portability, allowing you to place the sign in locations without direct wall outlets.
- Regularly check the USB connection to ensure it remains secure for consistent illumination.
9. Warranty and Support
For any issues, questions, or warranty claims, please contact the seller or retailer from whom you purchased the product. Please refer to your purchase documentation for specific warranty terms and contact information.
An additional user manual in PDF format may be available for download: View User Manual (PDF).