Introduction
Thank you for choosing our gamepad. For a pleasant gaming experience, please read this manual in detail. Please keep it after reading.
All pictures, statements, and text information in this manual are for reference only; please refer to the actual product. Content is subject to change without notice. These updates will be incorporated into the new manual, and we reserve the right of final interpretation.
Available features and additional services may vary by device, software, or service provider.
Product Features
- This product is a wireless game controller with new functions, suitable for wireless connection to the Wii console.
- Built-in CMOS sensor detects infrared and 3D somatosensory operation, and the wireless reception is effective within 8 meters.
- In addition to the necessary operation buttons for the game, the product also has a console power button to quickly turn off the console and the game controller.
- The game controller supports the vibration function, built-in speaker, and memory, which can store Mii characters.
- Uses high-performance wireless connection technology to exchange data with the console.


Safety Information
When you use the Wii controller for the first time, it is recommended to attach the included wrist strap to the lower part of the Wii Remote. Please wear the wrist strap and play the game to prevent losing your grip on the remote and causing damage to surrounding objects, or injury to other people.
Setup and Installation
1. Power Supply
Provide a set of power supply, use 2 AA batteries (1.5V*AA) to power the WIIMOTE; battery voltage must not exceed 3.0V.
2. Pairing Instructions
- Install 2 AA batteries for the first use.
- Open the battery cover of the handle (controller), locate the red twist (SYNC button).
- Open the SD card slot of the Wii host, locate the red twist (SYNC button).
- First, press the red SYNC button on the Wii host.
- Then, press the red SYNC button inside the battery cover of the controller for synchronization.
- Finally, press the 'A' button on the controller twice.
- Wait for only one light on the controller to turn on, which proves that it has been successfully paired.

3. Automatic Connection
After initial pairing, the controller will automatically connect for subsequent use, eliminating the need for manual connection.

Operating Instructions
Familiarize yourself with the buttons and their functions for optimal gameplay.

Controller Diagram and Button Functions
| Button/Feature | Function |
|---|---|
| Power Button | Turns the controller and console on/off. |
| D-pad | Directional input for movement and menu navigation. |
| A Button | Primary action button, often used for selection or main actions. |
| Plus (+) Button | Used for various in-game functions, often to zoom in or increase volume. |
| Minus (-) Button | Used for various in-game functions, often to zoom out or decrease volume. |
| HOME Button | Returns to the Wii console's HOME menu. |
| 1 Button | Used for specific in-game actions or selections. |
| 2 Button | Used for specific in-game actions or selections. |
| B Button | Trigger button located on the underside of the controller, often used for grabbing or firing. |
| SYNCRO Button (SYNC.) | Used for initial synchronization with the Wii console. |
| Player LEDs | Indicate which player number the controller is assigned to (1-4). |
| Speaker | Provides in-game sound feedback. |

Maintenance
- Keep the controller clean by wiping it with a soft, dry cloth.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble the controller; this will void any potential warranty.
- Remove batteries if the controller will not be used for an extended period to prevent leakage.
Troubleshooting
- Controller not turning on: Ensure fresh AA batteries are correctly inserted and fully charged. Check battery voltage does not exceed 3.0V.
- Controller not pairing: Follow the pairing instructions carefully (press SYNC button on both console and controller, then 'A' button twice). Ensure the console is powered on.
- Intermittent connection: Ensure the controller is within 8 meters of the console and there are no major obstructions. Replace batteries if connection issues persist.
- Buttons unresponsive: Check for physical obstructions or debris around the buttons. If the issue persists, try re-pairing the controller.
- Vibration or sound not working: Check in-game settings to ensure these features are enabled. Ensure batteries are sufficiently charged.
Specifications
| Feature | Detail |
|---|---|
| Model | 8512+8530 (V1.1) |
| Compatible Brand/Model | Nintendo Wii, Wii U |
| Type | Gamepads |
| Trigger Button Type | Non-Linear |
| Battery | 2 x AA (1.5V*AA), not included. Max voltage 3.0V. |
| Wireless Range | Up to 8 meters |
| Features | Built-in CMOS sensor, 3D somatosensory, vibration, built-in speaker, Mii character memory. |
| Package Dimensions (approx.) | Length: 15 cm, Width: 15 cm, Height: 5 cm |
| Package Weight (approx.) | 0.155 kg |
User Tips
- Always ensure fresh batteries are used for optimal performance and to avoid connection drops.
- For games requiring precise motion, ensure the wrist strap is securely fastened to prevent accidental drops.
- If experiencing input lag, try moving closer to the console or ensuring no other wireless devices are causing interference.
Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation. A user manual in PDF format is available for download: User manual (PDF).
For additional assistance, please contact the seller or manufacturer directly.