1. Introduction
This manual provides detailed instructions for the correct and safe use of your CHANTOWER Intelligent Pure Sine Wave Inverter. Please read this manual carefully before operation to ensure proper functionality and longevity of the product.
The CHANTOWER Pure Sine Wave Inverter converts DC power (from batteries) to AC power (220V), suitable for various applications including car and RV trips, camping, outdoor work, solar systems, and home emergency use. It features a pure sine wave output, ensuring compatibility with sensitive electronic devices.

2. Product Features
The CHANTOWER Pure Sine Wave Inverter is designed with advanced technology to provide reliable and efficient power conversion. Key features include:
- Pure Sine Wave Output: Provides clean and stable power, safe for sensitive electronics.
- High Conversion Efficiency: Up to 95% efficiency, minimizing power loss.
- Intelligent Temperature Controlled Fan: Fan rotates automatically when temperature reaches a certain threshold, ensuring optimal cooling.
- Multiple Intelligent Security Protections: Includes overload, high voltage, low voltage, overheating, reverse connection, short circuit, and over-current protection.
- Compact and Lightweight Design: Easy to transport and install.
- SPWM Pulse Width Control Technology: Ensures efficient and stable operation.
- SMT Chip Mounting Technology: Provides precise control, high reliability, and a low failure rate.
- Strong Load Capacity: Capable of handling a wide range of electrical appliances.
3. Main Components
Familiarize yourself with the main components of the inverter:

- AC Sockets: Universal shaped sockets for connecting AC appliances.
- Switch: Power ON/OFF switch for the inverter.
- LCD Display: Shows input voltage, output voltage, power display, and frequency.
- Positive Terminal (Red): Input terminal for connecting the positive battery cable.
- Negative Terminal (Black): Input terminal for connecting the negative battery cable.
- Cooling Fans: Efficient cooling fans to dissipate heat.
- Indicator Light: Green indicates normal operation, Red indicates protection status (e.g., overvoltage, undervoltage, overload).
4. Setup and Connection
Important: The inverter voltage must be consistent with the battery voltage. For example, a 12V inverter must be connected to a 12V battery. Multiple batteries can be used in parallel if they match the inverter's input voltage.
4.1. Direct Battery Connection
Follow these steps for direct connection to a battery:
- Connect the ring lug positive pole (red cable) to the positive terminal of the inverter.
- Connect the ring lug negative pole (black cable) to the negative terminal of the inverter.
- Ensure both terminals are tightened securely.
- Connect the other ends of the cables to the corresponding positive and negative terminals of the battery.
- Before connecting any device, ensure the inverter's switch is OFF.
- Connect your AC device to the inverter's AC output socket.
- Finally, turn on the inverter switch.

4.2. Connection Method for Car Cigarette Lighters
This method is suitable for low-power appliances. The cigarette lighter output can only carry electrical appliances with a load of less than 150W. If your appliance exceeds 150W, please use the direct battery connection method (Section 4.1).
Ensure you choose an inverter equipped with a car-mounted cigarette lighter model for this method.
4.3. Connection Method for Electric Motorcycle
Generally, the voltage of four batteries in an electric motorcycle is 48V, and five batteries is 60V. The specific voltage should be subject to the voltage marked on your electric motorcycle. Select an inverter with the same voltage as the electric vehicle.
5. Operating Instructions
- Place the inverter in a stable location and ensure good contact with the battery terminals.
- Confirm that the power of all electrical appliances is within the rated power range (50% of the peak power marked by the inverter). The peak power of inductive load electrical appliances should not exceed the peak power marked by the inverter.
- Plug the electrical plug of your appliance into the 220V output socket of the inverter.
- Turn on the switch of the power inverter. The green indicator light will illuminate, indicating normal operation.
- If the red indicator light illuminates, it indicates that the inverter is turned off due to overvoltage, undervoltage, overload, or overheating.
- In many cases, due to the limited output of the vehicle cigarette lighter socket, the normal inverter may alarm or shut down. In this case, normal operation can be restored by starting the vehicle or reducing the power consumption.
6. Precautions and Usage Environment
To ensure safety and optimal performance, observe the following:
- Dry Environment: Do not immerse the inverter in water or expose it to rain.
- Temperature Conditions: Operate in a cool place with a temperature between 0°C and 40°C.
- Ventilation: Do not use the power inverter in a narrow space. Do not cover the machine during use, and ensure good ventilation.
- Startup Loads: When appliances like refrigerators, motors, or compressors start up, they may draw a high peak current. Although the inverter can withstand a nominal peak power, if the peak power exceeds the inverter's output rate, it may cause overload protection and shut down. In such cases, turn off the electrical switch first, then turn on the inverter, and then turn on the electrical switches one by one, starting with the highest peak electrical appliance.
- Battery Voltage Monitoring: During use, if the battery voltage drops (e.g., a 12V battery drops to 10.4-11.0V), the inverter will alarm. At this point, turn off computers or other sensitive electrical appliances. The inverter will stop outputting current when the voltage drops further (e.g., to 9.7-10.3V), and the red indicator light will illuminate.
- Vehicle Battery Protection: Start the vehicle or charge the battery in a timely manner to prevent battery depletion and extend battery life.
- Overvoltage Protection: While the inverter has overvoltage protection, exceeding the input voltage (e.g., above 16V for a 12V battery) can still damage the inverter.
- Surface Temperature: After continuous use, the surface temperature of the inverter casing may rise to 60°C. Ensure smooth airflow and keep away from objects susceptible to high temperature noise.
- Child Safety: This power inverter is prohibited for use by minors.
7. Specifications
| Parameter | Value |
|---|---|
| Output Voltage | AC 220V±10% |
| Output Frequency | 50Hz, 60Hz |
| Output Waveform | Pure Sine Wave |
| Input Voltage | 12V/24V/48V/72V (20V-109V range) |
| Rated Power | 3000W / 4000W / 5000W (Peak Power) |
| Continuous Power | 1300W / 1600W / 2200W |
| Conversion Efficiency | >90% (0.9) |
| No-load Current | < 0.3A |
| Built-in Fuse | 10A/15A/20A/40A/70A/120A/240A (varies by model) |
| Under Voltage Alarm | 10.4-11.0V (12V system) / 20.5-22V (24V system) / 42-45V (48V system) / 54-57V (72V system) |
| Low Pressure Shutdown | 9.7-10.3V (12V system) / 19.4-20.6V (24V system) / 39-42V (48V system) / 48-52V (72V system) |
| Overpressure Shutdown | 14.5-15.5V (12V system) / 29-31V (24V system) / 58-62V (48V system) / 74-80V (72V system) |
| Socket Type | Universal |
| Certification | CE |
| Package Dimensions (approx.) | Length: 40cm, Width: 20cm, Height: 12cm |
| Package Weight (approx.) | 1.5 kg |
Note: Specifications may vary slightly between different models (e.g., 3000W, 4000W, 5000W versions). Always refer to the specific product for exact details.
8. Troubleshooting
This section provides solutions for common issues you might encounter with your inverter.
| Abnormal Phenomenon | Reason | Resolution Method |
|---|---|---|
| Inverter is not turning on, or indicator light is off. |
|
|
| Red indicator light is on, or inverter alarms/shuts down. |
|
|
| Output voltage is too low. |
|
|
| Battery usage time is too short. |
|
|
9. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your inverter.
- Keep the inverter clean and free from dust and debris.
- Ensure proper ventilation by keeping the cooling fans clear of obstructions.
- Periodically check all wiring connections for tightness and corrosion.
- Store the inverter in a dry, cool place when not in use.
- If the inverter is used in harsh environments, inspect it more frequently for wear and tear.
10. User Tips
- For optimal performance, ensure your battery system is adequately sized for the inverter's power rating and your intended load.
- Always connect the inverter to the battery before plugging in any appliances.
- When using multiple appliances, turn them on one by one to avoid sudden high current draws that could trigger overload protection.
- Monitor the LCD display for input/output voltage and power readings to ensure stable operation.
- Consider using a dedicated battery for the inverter if you plan to power high-drain devices for extended periods, especially in vehicles, to avoid draining the starting battery.
11. Warranty and Support
This product comes with a three-year warranty. Please follow the instructions carefully upon receiving the product to ensure its integrity.
11.1. Product Exchange Application
Accessories must be complete and not affect secondary sales. Missing relevant accessories will result in deductions based on the factory price.
11.2. Product Warranty / Application
- If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced, and sent back to the manufacturer for free repair. No charge for repair if the product encounters quality problems due to unauthorized opening or modification.
- If the machine casing is too dirty or old and used in harsh environments, resulting in product damage, it will be paid maintenance.
- For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After being repaired within the warranty period, the machine will be returned to the customer in its original condition and will be repaired for free.
- For machines that have been modified or unpacked without permission, any malfunctions will be paid maintenance. Please contact customer service for specific costs.
- After receiving the relevant fees, we will promptly handle the after-sales service and deliver the product to the customer by express delivery.
For any warranty claims or support, please contact customer service.
User Manual (PDF): A detailed user manual in PDF format is available for download. View User Manual (PDF)