1. Introduction
Thank you for choosing the ULTIMEA Skywave X50 5.1.4ch Dolby Atmos Soundbar System. This manual provides essential information for setting up, operating, and maintaining your home theater audio system. Please read it thoroughly before use and keep it for future reference.

Figure 1: ULTIMEA Skywave X50 System Overview
Video 1: ULTIMEA Skywave X50 Product Features
2. Setup
2.1 Package Contents
Please check the package for the following items:
- 1x Soundbar (main unit)
- 1x Subwoofer
- 2x Surround Speakers
- 1x Soundbar Power Adapter (2m/78")
- 2x Surround Power Adapters (3m/118")
- 1x HDMI Cable (1.5m/59")
- 1x Digital Optical Cable (1.5m/59")
- 1x Subwoofer Power Cord (2m/78")
- 1x Remote Control
- 12x Bracket Screws
- 6x Wall Anchors & Brackets

Figure 2: Package Contents
2.2 Speaker Placement
For optimal Dolby Atmos surround sound experience, position your speakers as follows:
- Soundbar: Place the soundbar centrally below your TV.
- Subwoofer: Position the subwoofer on the floor, ideally near the soundbar or in a corner for enhanced bass.
- Surround Speakers: Place the two surround speakers behind your main listening position, one on each side, facing towards the listener.

Figure 3: Recommended Speaker Placement
2.3 Soundbar Assembly
The soundbar comes in multiple sections. To assemble:
- Align the soundbar sections and gently push them together until they click into place.
- Twist the sections to secure the connection.

Figure 4: Soundbar Assembly
2.4 Power Connections
Connect all components to power outlets:
- Connect the Soundbar Power Adapter to the soundbar and then to a power outlet.
- Connect the Subwoofer Power Cord to the subwoofer and then to a power outlet.
- Connect the Surround Power Adapters to each surround speaker and then to power outlets.

Figure 5: Power Connections
2.5 Connecting to Your TV
You can connect the soundbar to your TV using HDMI eARC/ARC or Optical cable.
2.5.1 HDMI eARC/ARC Connection
- Connect one end of the HDMI cable to the HDMI to TV (eARC) port on the soundbar.
- Connect the other end of the HDMI cable to the HDMI eARC/ARC port on your TV.
- On the soundbar, select the eARC input using the remote control or the soundbar's input button.

Figure 6: HDMI eARC/ARC Connection
2.5.2 Optical Connection
- Connect one end of the Digital Optical Cable to the OPTICAL port on the soundbar.
- Connect the other end of the Digital Optical Cable to the OPTICAL port on your TV.
- On the soundbar, select the OPT input using the remote control or the soundbar's input button.

Figure 7: Optical Connection (similar to HDMI diagram, but use OPTICAL ports)
2.6 Initial Pairing (Surround Speakers & Subwoofer)
The soundbar, subwoofer, and surround speakers are factory paired. If they become disconnected, you may need to re-pair them.
2.6.1 Pairing Surround Speakers
- Press and hold the Surround Level button on the remote control for about 5 seconds.
- Simultaneously, press and hold the PAIR button on each surround speaker for about 5 seconds.
- The indicator light on the surround speakers will stay solid when pairing is complete.
2.6.2 Pairing Subwoofer
- Press and hold the Xupmix button on the remote control for about 5 seconds.
- Simultaneously, press and hold the ON/Standby button on the subwoofer for about 5 seconds.
- The indicator light on the subwoofer will stay solid when pairing is complete.
3. Operating Instructions
3.1 Remote Control Overview
Familiarize yourself with the remote control buttons:

Figure 8: Remote Control Layout (example, actual layout from PDF page 4)
- Power Button (1): Turns the system on or off.
- Input Source Switching (2): Cycles through available input sources (HDMI eARC, HDMI IN, Optical, USB, Bluetooth).
- Volume Up/Down (+/-) (4): Adjusts the main volume level.
- Playback Controls (4): Play/Pause, Skip Forward/Backward (for USB/Bluetooth).
- EQ Mode (6): Selects different equalizer presets (Movie, Music, Voice, Sport, Game, Night).
- Bass Adjustment (5): Adjusts the subwoofer bass level.
- Xupmix On/Off (7): Toggles the Xupmix feature.
- Up-Firing Level (8): Adjusts the volume level of the up-firing speakers.
- Surround Level (9): Adjusts the volume level of the surround speakers.
- Mute (10): Mutes or unmutes the audio.
3.2 Input Selection
Press the Input Source Switching button on the remote control or the soundbar to cycle through inputs: HDMI eARC, HDMI IN, Optical, USB, Bluetooth.
3.3 Bluetooth Pairing
- Select BT input on the soundbar. The Bluetooth indicator will blink.
- On your mobile device, go to Bluetooth settings and select "Skywave X50" from the list of available devices.
- Once connected, the Bluetooth indicator on the soundbar will stop blinking and remain solid.
3.4 USB Playback
- Insert a USB drive (formatted as FAT32) with audio files into the USB port on the soundbar.
- Select USB input on the soundbar.
- Use the remote control's playback buttons to control music playback.
3.5 ULTIMEA App Control
For full control and personalized sound settings, download the ULTIMEA App:
- Scan the QR code provided in the manual or search for