TYT MD-UV390 Plus

Contents

TYT MD-UV390 Plus DMR Digital Walkie Talkie User Manual

Model: MD-UV390 Plus (MD-UV-390PLUS)

Brand: TYT

1. Introduction

The TYT MD-UV390 Plus is a robust DMR (Digital Mobile Radio) digital walkie-talkie designed for reliable communication. It features dual-band VHF/UHF operation, high power output (5W/10W), IP67 waterproof rating, and optional GPS functionality. This manual provides essential information for the safe and efficient use of your radio.

TYT MD-UV390 Plus DMR Digital Walkie Talkie front view, highlighting IP67 Waterproof, DMR+Analog, VHF/UHF, AES-256 Encryption, 3000 Channels, GPS, and 10W power.
Front view of the TYT MD-UV390 Plus, showcasing its key features.

2. Safety Information

Please read and understand the following safety precautions before operating your radio:

  • Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
  • Do not disassemble or modify the radio. Repairs should only be performed by qualified technicians.
  • Use only approved batteries and chargers to prevent damage or injury.
  • Avoid prolonged exposure to direct sunlight or extreme temperatures.
  • Keep the radio away from medical devices to prevent interference.
  • Ensure the antenna is properly attached before transmitting to avoid damage to the radio.

3. Package Contents

Your package should contain the following items:

  • TYT MD-UV390 Plus Radio Body
  • Antenna
  • Li-ion Battery (2200mAh)
  • Desktop Charger with AC Adapter
  • Belt Clip
  • Hand Strap
  • User Manual (PDF available for detailed instructions)

4. Radio Components and Controls

Familiarize yourself with the various parts of your radio:

Detailed diagram of the TYT MD-UV390 Plus radio's controls and display, illustrating analog vs. digital channel display, channel knob, power knob, PTT, MONI, MIC, and keypad.
Key components and controls of the MD-UV390 Plus.
  • Antenna: For transmitting and receiving signals.
  • Channel Knob: Used to switch between channels (Digital / Analog).
  • Power/Volume Knob: Turns the radio on/off and adjusts volume.
  • PTT (Push-To-Talk) Button: Press to transmit, release to receive.
  • MONI Button: Monitors the current channel.
  • MIC: Microphone for voice input.
  • Keypad: For entering frequencies, menu navigation, and other functions.
  • Color LCD Display: Shows channel information, battery status, signal strength, and menu options.

5. Initial Setup

5.1. Installing the Battery

  1. Align the battery with the grooves on the back of the radio.
  2. Slide the battery upwards until it clicks into place.
  3. To remove, slide the battery latch (if present) and pull the battery downwards.
Rear view of the TYT MD-UV390 Plus radio with the battery removed, showing the battery compartment and model information.
Battery compartment and battery details.

5.2. Attaching the Antenna

  1. Screw the antenna into the connector on the top of the radio clockwise until it is firm.
  2. Do not overtighten.
Top view of the TYT MD-UV390 Plus radio, showing the antenna connector and two rotary knobs.
Antenna connector and control knobs on top of the radio.

5.3. Charging the Battery

  1. Place the radio (with battery installed) into the desktop charger.
  2. Ensure the charging contacts on the radio align with those on the charger.
  3. The charger indicator light will show charging status (e.g., red for charging, green for fully charged).
Front view of the TYT MD-UV390 Plus radio in its charging cradle.
Radio in its charging cradle.
Side view of the TYT MD-UV390 Plus radio in the charging cradle, showing the charging port.
Side view of the radio in the charging cradle, showing the charging port.

6. Basic Operation

6.1. Power On/Off and Volume

Rotate the Power/Volume knob clockwise to turn the radio on. Continue rotating to increase the volume. Rotate counter-clockwise to decrease volume and turn off the radio.

6.2. Channel Selection

Rotate the Channel knob on top of the radio to select your desired channel. The display will show the current channel number and frequency.

6.3. Transmitting and Receiving

To transmit, press and hold the PTT (Push-To-Talk) button on the side of the radio and speak into the microphone. Release the PTT button to receive.

6.4. Analog and Digital Mode

The MD-UV390 Plus supports both Analog and Digital modes. The display will indicate the current mode. Note that GPS functions are typically supported in Digital Channel mode and not in Analog Channel mode.

Diagram showing Analog and Digital channel display on the TYT MD-UV390 Plus, and how the Channel Knob switches between modes.
Switching between Analog and Digital modes via the Channel Knob.

6.5. GPS Functionality (Optional)

If your radio is equipped with GPS, it can provide location information. This feature is typically active in Digital mode. Refer to the full user manual for detailed GPS operation and settings.

7. Key Features

The TYT MD-UV390 Plus offers a range of advanced features:

  • DMR Digital Technology: Utilizes Time-Division Multiple-Access (TDMA) for efficient communication.
  • Dual Band Operation: Supports both VHF (136-174MHz) and UHF (400-480MHz) frequency ranges.
  • Dual Wait/Dual Standby: Allows monitoring of two channels simultaneously.
  • High Power Output: Adjustable between 5W and 10W.
  • IP67 Waterproof: Protected against dust and immersion in water up to 1 meter for 30 minutes.
  • AES256 Encryption: Provides secure communication (optional, or AES128/256).
  • 3000 Channels: Ample storage for various frequencies and contacts.
  • Color LCD Display: Clear and intuitive interface.
  • Transmit Interruption: Ability to interrupt ongoing transmissions.
  • Group/Private Call Match (Promiscuous Mode): Allows reception of all calls regardless of ID.
  • Firmware Upgradable: Ensures your radio stays up-to-date with the latest features.
  • 8 Hours of Recording: Built-in recording capability.
  • Compatible with Mototrbo Tier I & II: Ensures interoperability with other DMR systems.
Promotional image detailing key features of the TYT MD-UV390 Plus, including ARC4/AES 128/256 encryption, transmit interruption, various call types, dual band/dual wait/dual standby, IP67 waterproof rating, and optional GPS.
Overview of MD-UV390 Plus features.

8. Maintenance and Care

  • Cleaning: Wipe the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
  • Battery Care: Fully charge the battery before initial use. Avoid overcharging or completely draining the battery for extended periods. Store batteries in a cool, dry place.
  • Antenna: Regularly check the antenna for damage. A damaged antenna can affect performance.
  • Waterproof Seal: Ensure all covers (e.g., accessory port cover) are securely closed to maintain the IP67 waterproof rating.

9. Troubleshooting

Problem Possible Solution
Radio won't turn on Check battery charge. Ensure battery is properly installed.
Cannot transmit or receive Verify antenna is attached. Check channel and frequency settings. Ensure you are in range.
Poor audio quality Adjust volume. Check microphone and speaker for obstructions. Ensure good signal strength.
Battery drains quickly Reduce transmit power if possible. Ensure battery is fully charged and not old/damaged.

10. Technical Specifications

Below are the general specifications for the TYT MD-UV390 Plus:

Comprehensive table of main functions and general, transmitter, and receiver specifications for the TYT MD-UV390 Plus.
Detailed technical specifications.
Feature Specification
Frequency Range VHF: 136-174 MHz, UHF: 400-480 MHz
Output Power 5W / 10W
Battery Capacity 2200 mAh Li-ion
Waterproof / Water-Resistant IP67
Storage Channel 3000
Channel Spacing 12.5 kHz
Operating Voltage 7.4V
Frequency Stability ±1 ppm
Operating Temperature -30°C to +60°C
Dimensions Not specified in provided data
Weight 258g (with battery)
Certification CE, FCC, RoHS, etc.

11. User Tips

  • Programming: For advanced features and custom channel programming, consider using the appropriate programming software and cable.
  • Range Optimization: For best range, ensure your antenna is clear of obstructions and transmit from higher ground if possible.
  • Battery Life: To extend battery life, use lower power settings when high power is not necessary.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates to improve performance and add new features.

12. Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official TYT MD-UV390 Plus user manual PDF or contact the manufacturer/seller directly. The comprehensive user manual (PDF) can be found at this link.

© 2024 TYT. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.