taslauk 2835 LED STRIP

Contents

taslauk Constant Current LED Strip 2835 User Manual

Model: 2835 LED STRIP | Brand: taslauk

Introduction

This manual provides detailed instructions for the safe and effective use of your taslauk Constant Current LED Strip. Please read this manual thoroughly before installation and operation, and keep it for future reference.

The taslauk 2835 LED strip is designed for various lighting applications, including repairing chandeliers, creating ribbon tape lighting, and illuminating ceiling lights. It features constant current technology for stable performance and is available in different LED densities (120 LEDs/M, 180 LEDs/M, 200 LEDs/M) and color temperatures (White 6000K, Warm White 3000K, Neutral White 4000K, and CCT 2700-6000K).

Product Specifications

General Specifications
ItemDetails
Product Name2835 LED Strip
TypeCOB/LED Strip Light
Brand Nametaslauk
Model Number2835 LED STRIP
LED Chip ModelSMD2835
LED Chip BrandEpistar
Strip TypeSMD
Item TypeStrip
Width7mm
Length5 Meters (available in 0.5M-10M for 12V, 0.5M-20M for 24V)
LEDs Number/M120LEDs/M (6000k/4000k/3000k), 180LEDs/M (CCT 2700-6000k), 200LEDs/M (CCT 2700-6000k)
Emitting ColorWhite 6000K, Warm White 3000K, Neutral White 4000K, CCT 2700-6000K (also Red/Green/Blue/Yellow/Pink/IceBlue/Purple options)
Working Input VoltageDC 12V / DC 24V (Constant Current)
VoltageConstant Current
Power SourceDC
Power Consumption (W/m)7-8W/M (7.36W/m listed in properties)
Wattage8W/M
Luminous Flux2000-82000
Waterproof GradeIP20/IP21/IP30/IP65/IP67/IP68 (Note: IP20 is not waterproof)
WaterproofNo (for IP20, check specific product for higher IP ratings)
Working Temperature-20°C to 50°C (No continuous use beyond this range)
Average Life (hrs)50000
Power GenerationAlways On
Is Smart DeviceYes
Is Batteries IncludedNo
CertificationsCCC, ROHS, CE DoC, EMC Testing Report, Product Packaging label diagram
OriginMainland China

Warning & Safety Information

Warning:

  • Risk of electric shock! Do not touch the connectors or wires with wet hands. Disconnect the power supply before installing, maintaining, or replacing the product.
  • Risk of fire! Do not install the strip light near flammable materials (e.g., fabric, wood, plastic) or cover it with any objects that block heat dissipation. Overheating may cause fire or product damage.
  • For outdoor installation: All connections, terminals, and ends of the LED strip must be protected in a watertight enclosure or completely sealed (especially for IP65/IP67 grades) to prevent water ingress and electric shock. IP20 strip lights are not suitable for outdoor use.
  • Do not modify the product, power cord, or connectors without professional guidance. Any modification to the product must be performed by a qualified electrician. We are not liable for any damage, injury, or loss caused by unauthorized modification, improper use, or installation.
  • Keep this product out of reach of children and pets to avoid accidental ingestion, electric shock, or burns.
  • If the product malfunctions (e.g., overheating, unusual odor), disconnect the power supply immediately and stop using it. Contact a professional for inspection or repair; do not disassemble the product yourself.
  • This product is not intended for use in medical, industrial, or high-precision equipment applications where equipment failure may cause serious consequences.

Setup and Installation

Mounting Preparation

  • Ensure the installation surface is clean, flat, and capable of supporting the strip light's weight for stable placement.

Correct Usage Method

  1. Check the product packaging and strip light for any damage before use. Do not use if the strip, wires, or connectors are damaged.
  2. Confirm that the input voltage of the power supply matches the rated voltage of the LED strip light to avoid burnout.
  3. For strip lights with cutting marks, cut only at the designated positions (usually marked with a scissors icon) to ensure the remaining part functions normally.
  4. Connect the LED strip to the power supply correctly: align the positive (+) and negative (-) poles. Reverse connection will cause the strip to not light up and may damage the product.
  5. For RGB or CCT strip lights, connect the control module (if included) according to the wiring diagram before connecting to the power supply. Test the color change function to ensure proper operation.
  6. Install the strip light in a dry, well-ventilated location (except for IP65/IP67 grades) away from flammable materials (e.g., curtains, paper) and high-temperature sources (e.g., stoves, heaters).
Close-up of 120 LEDs/M LED strip showing cutting marks and individual LED chips.
Close-up image of a 120 LEDs/M LED strip, 7mm width, showing the individual LED chips and cutting marks. Text indicates 'White/Neutral white/Warm white'. This image illustrates where the strip can be safely cut.

Operation

Once properly installed and connected to a compatible power supply, your LED strip light will illuminate. For CCT or RGB versions, use the associated control module (if included) to adjust color temperature or color.

Usage Restrictions

  • IP20 strip lights are strictly for indoor dry locations; do not use in damp or outdoor environments.
  • Do not exceed the maximum continuous use time of 8 hours; turn off the strip periodically to avoid overheating.
  • Do not wrap the strip light tightly around objects or install it in a sealed space without heat dissipation, as this may cause overheating and shorten the service life.
  • The power cord is for dry location use only; do not expose it to water or damp environments.
  • Do not use the product for purposes other than lighting (e.g., heating, decoration of high-temperature equipment).
Comparison of White, Neutral White, and Warm White LED strips.
This image demonstrates the visual difference between White (5500-6000K), Neutral White (4000-4500K), and Warm White (2700-3000K) LED strips.

Maintenance

The LED strip lights require minimal maintenance. Ensure the strip and connections remain clean and free from dust or debris. For cleaning, gently wipe with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.

Storage Guidelines

  • When not in use, store the product in a cool, dry place away from direct sunlight and extreme temperatures to maintain performance.

Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
LED strip does not light up.Incorrect voltage, reverse polarity, damaged strip/wires, faulty power supply.
  • Ensure power supply voltage matches strip voltage (12V or 24V).
  • Check that positive (+) and negative (-) poles are correctly aligned.
  • Inspect the strip, wires, and connectors for damage.
  • Test the power supply with another device if possible.
Strip lights partially.Improper cutting, loose connection, localized damage.
  • Ensure cuts were made only at designated marks.
  • Check all connections for tightness.
  • Inspect the non-lighting section for visible damage.
Overheating or unusual odor.Blocked heat dissipation, faulty product.
  • Immediately disconnect power.
  • Ensure the strip is not covered or in a sealed space.
  • Contact customer service for inspection.

User Tips

  • When dealing with CCT (Color Correlated Temperature) LED strips, ensure your controller and power supply are compatible with the strip's pin configuration (e.g., 3-pin for CCT, 4-pin for RGB). Incorrect connections can prevent proper function or damage the strip.
  • Always test the LED strip with a small section before full installation to confirm functionality and desired color output.

Warranty and Support

Warranty Terms

The product warranty is valid only for items used and installed in accordance with these instructions. It is void for damage caused by improper use, unauthorized modification, or natural disasters.

Customer Support

For further assistance or technical support, please contact our customer service team. You may also refer to the official user manual PDF for more detailed information: User Manual (PDF)

© 2024 taslauk. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.