Erilles XD Wifi Camera

Contents

XD Wifi Camera User Manual

Model: XD Wifi Camera | Brand: Erilles

1. Introduction

Thank you for choosing the Erilles XD Wifi Camera. This compact and versatile camera is designed for smart home security and surveillance, offering 1080P HD video recording, night vision, and motion detection capabilities. Please read this manual carefully to ensure proper setup and operation of your device.

2. Safety Information

⚠ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

⚠ Important Note:

  • Keep a certain space with other objects to ensure proper ventilation.
  • Do not cover the shell or surrounding heat sinks when the equipment is operating or charging to avoid overheating.
  • Overheating can damage the equipment and may lead to serious consequences.
  • This product is not designed for illegal purposes. Any consequences arising from misuse are at your own risk.
  • This camera does not have a built-in battery in some versions; it requires continuous power. For versions with a built-in battery, ensure it is fully charged before use.
  • Operating temperature: 0 - 45 ℃. For prolonged service life, use at room temperature.
  • Working humidity: 20%-80%. Do not place the product in a humid environment. It is not waterproof.
  • Avoid strong shock and vibration.
  • Do not use near strong magnetic fields, strong electric fields, flammable, or explosive materials.
  • It is normal for the camera to become warm during operation as the chip is working.

3. Product Overview

The XD Wifi Camera is an ultral mini device designed for discreet surveillance. It comes in two main versions: with a built-in battery and without. Please check your specific model.

Smallest WIFI Camera with built-in battery, mini size, motion detection, WiFi, night vision, 1080P Full HD.
Image: Smallest WIFI Camera with built-in battery, mini size, motion detection, WiFi, night vision, 1080P Full HD.
Ultral Mini WIFI Camera with battery icon.
Image: Ultral Mini WIFI Camera with battery icon.

3.1. Components

Diagram of XD Wifi Camera components: Night vision light, HD Lens, TF Card Slot, USB Port, Reset Key.
Image: Diagram of XD Wifi Camera components: Night vision light, HD Lens, TF Card Slot, USB Port, Reset Key.
  • Night Vision Light: Invisible LED lights for low-light conditions.
  • HD Lens: High-definition camera lens.
  • TF Card Slot: For inserting a Micro SD card (up to 128GB, FAT32 format).
  • USB Port: Micro USB 2.0 5PIN for power and data transfer.
  • Reset Key: Used to reset the camera to factory settings.

3.2. Package Contents

  • XD Wifi Camera
  • USB Cable
  • User Manual

4. Specifications

FeatureSpecification
SensorBF3A03
Focal Length3.2mm
View Angle90°
Main Control ChipBK7252UQN68
Memory Card TypeMicroSD / TF (up to 128GB, FAT32 format)
USB InterfaceMicro USB2.0 5PIN
Voltage3.7V
Image Resolution1280*720P
File FormatJPG
Video Resolution1080P/720P/640P (via APP)
Video Compression FormatAVI (M-JPEG)
Continuous Video Recording TimeNo limited (when continuously powered)
Operating Temperature-10~50℃
WIFI Distance (AP Mode)10 meters (without block)
WIFI Distance (Remote)No limited
Night Vision Distance3-5M
Storage Temperature-10~70℃
Humidity Environment5%-90% (No condensation)
High Definition Support1080P (Full-HD)
Sensor TechnologyCMOS
TypeMini
CertificationCE

5. Setup Guide

5.1. Initial Charging (for models with built-in battery)

For models with a built-in battery, it is recommended to fully charge the camera for 2-3 hours before first use. Connect the camera to a 3.7V-5V/1A-2A power bank or charger using the provided USB cable. The camera will turn on automatically when charging.

Note: Some versions of this mini WiFi camera do not have a built-in battery and require continuous power connection to operate.

5.2. Memory Card Installation

Insert a Micro SD card (up to 128GB, formatted to FAT32) into the TF Card Slot. The camera supports continuous recording, with storage capacity varying by card size:

  • 8GB: Approx. 2 days recording
  • 16GB: Approx. 4 days recording
  • 32GB: Approx. 8 days recording
  • 64GB: Approx. 16 days recording
  • 128GB: Approx. 32 days recording
External Memory Card Slot Max Support 128GB, showing storage durations for different card sizes.
Image: External Memory Card Slot Max Support 128GB, showing storage durations for different card sizes.

5.3. App Download

Download the companion app, "iWFCam", compatible with your phone system. You can scan the QR code below or search for "iWFCam" in your app store.

QR code for downloading the iWFCam app.
Image: QR code for downloading the iWFCam app.

5.4. Camera-Phone Connection (AP Mode)

This mode allows direct connection between your phone and the camera's WiFi hotspot for local viewing.

  1. Connect the camera to a 3.7V-5V/1A-2A charger or other power supply. The blue light will flash slowly, indicating AP Mode.
  2. On your phone, go to WLAN (WiFi) settings and connect to the camera's hotspot (named with "BK***" and no password).
  3. Open the "iWFCam" app. If you are using an Android phone, a message to "Confirm Connection" may pop up; please confirm to continue connecting.
  4. Ensure the camera-phone connection is established within 5 meters for a strong signal.
Video: Demonstrates the process of connecting the camera to a smartphone via WiFi and accessing the live feed through the iWFCam app.

5.5. Camera-APP Remote Connection (IP Mode)

This mode allows remote viewing over the internet.

  1. Start the "iWFCam" app. The camera should automatically be added and show "Online".
  2. Click the "Setting" icon next to the camera in the app.
  3. Go to "Wifi Config".
  4. Choose your home router (supports 2.4G WiFi only) and enter its network password.
  5. Wait for the camera's update process for remote control. Once it shows "Online", the camera's blue light will remain on, indicating a successful connection.

Note: The camera-router connection should be established within 5 meters for a strong signal.

6. Operating Instructions

6.1. Live-feed Page

After connecting, access the live-feed page in the "iWFCam" app. You may receive a pop-up message to change the default password for security; it is recommended to do so. From this page, you can adjust various settings:

  • Brightness: Adjust video brightness.
  • Night Vision: Toggle night vision mode.
  • Turn off lights: Turn off the camera's indicator lights.
  • Video Resolution: Select desired video quality (1080P/720P/640P).
  • Audio: Enable/disable audio recording.
  • Microphone: (If supported) For two-way audio.
  • Video: Start/stop video recording.
  • Photo: Take still images.

6.2. Turning Off Indicator Lights

To turn off the camera's working indicator lights, press the third icon from the video interface in the app. The red light will go out after approximately 15 seconds. This is a unique design feature for discreet operation.

Diagram showing how to turn off the indicator lights in the app and the physical camera light turning off.
Image: Diagram showing how to turn off the indicator lights in the app and the physical camera light turning off.

6.3. Motion Detection

The camera features AI human detection, which detects humans or animals in motion and sends activity alerts to your phone. It automatically enters recording mode when motion is detected and returns to standby if no motion is present.

Image showing AI Human Detection in action, detecting a person in a room and sending an alert to a phone.
Image: AI Human Detection in action, detecting a person in a room and sending an alert to a phone.
Diagram illustrating motion detection states: Standby Mode, recording upon motion, and returning to Standby Mode.
Image: Diagram illustrating motion detection states: Standby Mode, recording upon motion, and returning to Standby Mode.

6.4. Night Vision

The camera is equipped with invisible LED night vision lights, providing clear black-and-white footage in dark environments without emitting visible light. The IR-CUT feature automatically switches between day and night modes.

Image demonstrating IR-CUT functionality for automatic day/night vision switching.
Image: IR-CUT functionality for automatic day/night vision switching.

6.5. Cycle Recording

The camera supports cycle recording, meaning it will continuously record and overwrite the oldest files when the memory card is full. This ensures you always have the latest video files without worrying about storage space.

6.6. Timestamp

The camera can display a timestamp on the video footage, which can be toggled on or off via the app settings.

Image showing a video frame with a timestamp, indicating it can be shown or hidden.
Image: Video frame with a timestamp, indicating it can be shown or hidden.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the camera. Avoid using liquid cleaners or solvents.
  • Temperature: Operate the camera within the specified temperature range of 0℃ to 45℃. Avoid extreme temperatures.
  • Humidity: Keep the camera in an environment with 5%-90% humidity (non-condensing). Do not expose it to water or high moisture.
  • Storage: Store the camera in a cool, dry place with a temperature between -10℃ and 70℃.
  • Handling: This is a precision electronic product. Handle with care to avoid strong impacts or vibrations.

8. Troubleshooting

8.1. Camera not connecting to WiFi (AP Mode)

  • Ensure the camera is powered on and the blue light is flashing slowly.
  • Verify your phone's WiFi is enabled and you are selecting the correct "BK***" hotspot.
  • Make sure your phone is within 5 meters of the camera for a strong signal during initial connection.
  • If using an Android phone, accept any "Confirm Connection" prompts.

8.2. Camera not connecting to home WiFi (IP Mode)

  • Confirm your router uses 2.4G WiFi, as the camera does not support 5G networks.
  • Double-check the WiFi password entered in the app.
  • Ensure the camera is within 5 meters of the router for a strong signal during setup.
  • If the camera does not automatically add online after a reset, manually search or scan the QR code in the app to add it.

8.3. Battery life is short

  • Some camera versions do not have a built-in battery and require continuous power. Ensure your model is designed for battery operation if you expect it to run without external power.
  • For models with a built-in battery, continuous recording or live streaming will drain the battery quickly. These mini cameras are typically designed for short-term use on battery or continuous power.

8.4. Camera gets hot during operation

  • It is normal for the camera to become warm as the internal chip is working. Ensure proper ventilation and do not cover the camera to prevent excessive heat buildup.

8.5. Disconnecting often

  • Check the strength of your WiFi signal. A weak signal can cause frequent disconnections.
  • Ensure there are no obstructions between the camera and your router/phone.

9. User Tips

  • Discreet Placement: The camera's ultra-mini size (approx. 1.1x0.4x1.1 inches) makes it easy to hide. Consider placing it in inconspicuous spots for effective surveillance.
  • Night Vision: Utilize the invisible LED night vision for clear monitoring in complete darkness. The ability to turn off indicator lights enhances its stealth.
  • Motion Detection Alerts: Configure motion detection alerts in the app to receive instant notifications on your phone when activity is detected, making it an excellent anti-theft tool.
  • Continuous Power: For extended recording, especially with models without a built-in battery, ensure the camera is connected to a continuous power source like a power bank or wall charger.
  • Memory Card: Always use a reliable Micro SD card (up to 128GB, FAT32 format) to ensure all recordings are saved.
  • App Password: For enhanced security, always change the default password in the iWFCam app.

10. Warranty and Support

For warranty information or technical support, please contact the seller or refer to the product's official website. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.