1. Introduction
This K6 dash cam is a practical and reliable driving recording device, designed to capture clear video footage of your driving process, provide effective evidence for traffic accidents, and record wonderful travel moments. It supports WIFI connection, GPS positioning (if equipped), and other convenient functions, with simple operation and wide compatibility, suitable for most vehicles. This manual will guide you through the correct installation, operation and daily maintenance of the device.
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, please contact customer support.
- Dash cam main unit (Front Camera)
- Rear camera (if ordered)
- Car charger
- USB cable
- Adhesive mount
- User manual (This document)
3. Product Overview
3.1 Buttons and Functions
The dash cam is equipped with simple and easy-to-operate buttons, which are clearly marked and easy to use during driving. The specific functions are as follows:
- Power Button: Short press to turn on/off the device; long press for 3 seconds to force shutdown (in case of malfunction).
- OK/Confirm Button: Confirm the selected settings, start/pause video recording, and play/pause video playback.
- Menu Button: Enter the system settings interface, where you can adjust language, date format, recording parameters, etc.
- Up/Down Buttons: Switch options in the menu interface; adjust the volume during video playback; switch between front/rear camera (if equipped) during recording.
- WIFI Button: Short press to turn on/off the WIFI hotspot of the device, facilitating connection with mobile phones.
3.2 Indicator Lights
The indicator lights on the device can help you quickly understand the working status of the dash cam:
- Power Indicator (Red): Steady on when the device is powered on normally; blinking when the power is low.
- Recording Indicator (Blue): Blinking continuously when the device is recording normally; steady on when recording is paused.
- WIFI Indicator (Green): Steady on when WIFI is turned on; blinking when connecting to a mobile phone; off when WIFI is turned off.
- GPS Indicator (Yellow, if equipped): Steady on when GPS is successfully positioned; blinking when searching for satellite signals; off when GPS is turned off.
4. Setup Guide
4.1 Dash Cam Installation
Proper installation is crucial to ensure the normal operation of the dash cam and the clarity of the recorded footage. Please follow the steps below to install:
- Choose a suitable installation position: Fix the adhesive mount on the car windshield, 5-10 cm to the right of the rearview mirror, making sure it does not block the driver's sight and the front camera can capture the entire front road clearly.
- Install the main unit: Tear off the protective film on the back of the mount, press it firmly on the windshield for 30 seconds to ensure it is firmly attached, then clip the dash cam main unit into the mount.
- Route the cable: Route the USB power cable along the edge of the windshield, through the door frame seal, and connect it to the car charger. Plug the car charger into the car's cigarette lighter socket to ensure stable power supply.
- Install the rear camera (if equipped): Fix the rear camera at the rear of the car (above the license plate or on the rear glass), route the extension cable along the car body, and connect it to the corresponding interface of the main unit.
- Adjust the angle: Adjust the angles of the front and rear cameras (if equipped) to ensure that the shooting range is complete and there is no blind spot.
4.2 APP Installation
To use the WIFI function of the dash cam, you need to install the dedicated APP on your mobile phone. The app is named