HJC FURION 3.0 Raceday Road mtb met

Contents

HJC FURION 3.0 Cycling Helmet User Manual

Model: FURION 3.0 Raceday Road mtb met

1. Introduction

Thank you for choosing the HJC FURION 3.0 Cycling Helmet. This manual provides essential information for the proper setup, operation, maintenance, and safety of your helmet. Please read it thoroughly before using your helmet and retain it for future reference.

Manufacturer Information:

  • Product Name: Helmet
  • Model: 002 (Batch/Serial Number: 002)
  • Manufacturer: RUIAN LEI PENG WEI TRADING CO., LTD.
  • Address: FLOOR 2, NO.6, DOCK SOUTH ROAD, QIANBUVILLAGE, XINCHENG STEET, RUIAN CITY, ZHEJIANG, CHINA
  • E-mail: willing88@126.com
  • Phone: 18106757030

2. Safety & Warnings

WARNING: This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets trapped with the helmet.

  • Always wear your helmet when cycling, regardless of the distance or speed.
  • A helmet is designed to absorb the energy of an impact by partially destroying itself. Even if the helmet appears undamaged, it may have been compromised. Replace your helmet after any significant impact.
  • Do not modify the helmet in any way (e.g., drilling holes, painting, attaching accessories not approved by the manufacturer), as this may compromise its protective capabilities.
  • Ensure the helmet fits properly and is securely fastened before each ride.
  • This helmet is designed for cycling activities only.

3. Setup & Fit Adjustment

3.1 Unpacking

Carefully remove the helmet from its packaging. Inspect the helmet for any signs of damage that may have occurred during shipping. If you find any damage, do not use the helmet and contact your retailer.

3.2 Sizing Information

The HJC FURION 3.0 helmet is available in two sizes:

  • Size M: Head circumference 54-58 cm
  • Size L: Head circumference 55-62 cm

To determine your size, measure the circumference of your head just above your eyebrows.

Internal dimensions of HJC helmet for Size M and Size L
Figure 1: Internal dimensions and weight for Size M and Size L helmets.

3.3 Adjusting the Fit

A properly fitted helmet should be snug, level on your head, and not obstruct your vision. It should not move excessively when you shake your head.

  1. Placement: Place the helmet squarely on your head, ensuring it covers your forehead. It should not be tilted back or forward.
  2. Rear Adjustment System: Most HJC helmets feature a rear dial or retention system. Turn the dial clockwise to tighten the fit and counter-clockwise to loosen it until the helmet feels snug and secure without being uncomfortably tight.
  3. Rear view of HJC helmet showing the adjustment dial
    Figure 2: Rear adjustment dial for a secure fit.
  4. Strap Adjustment:
    1. Side Straps: Adjust the sliders on the side straps so that they form a 'V' shape just below your ears.
    2. Chin Strap: Fasten the chin strap buckle. Tighten the strap until it is snug under your chin. You should be able to fit one or two fingers between the strap and your chin, but no more.
Internal view of HJC helmet showing padding and strap system
Figure 3: Internal view of the helmet showing the padding and strap system.

4. Operating (Wearing the Helmet)

Once your helmet is properly adjusted, ensure it remains in place throughout your ride. Periodically check the fit and strap tension, especially after long rides or if you feel any discomfort. The helmet should not rock forward, backward, or side-to-side.

5. Maintenance

5.1 Cleaning

  • Shell: Clean the helmet's exterior with a soft cloth, mild soap, and water. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's materials and finish.
  • Pads: The internal padding can often be removed for washing. Hand wash with mild soap and water, then air dry completely before reinserting.
Close-up of internal padding of HJC helmet
Figure 4: Internal padding for comfort and hygiene.

5.2 Storage

Store your helmet in a cool, dry place away from direct sunlight, extreme temperatures, and chemicals. Do not store it in a car on a hot day, as high temperatures can damage the helmet's materials.

5.3 Inspection

Regularly inspect your helmet for any signs of damage, such as cracks in the shell or foam, frayed straps, or malfunctioning buckles/adjustment systems. If any damage is found, replace the helmet immediately.

6. Troubleshooting

  • Helmet feels loose: Re-adjust the rear retention system by turning the dial clockwise until snug. Check chin strap tension.
  • Straps are uncomfortable: Adjust the side strap dividers to ensure they sit comfortably below your ears. Ensure the chin strap is not twisted.
  • Helmet sits unevenly: Ensure the rear retention system is centered on the back of your head and the helmet is pulled down evenly.

7. Specifications

FeatureSpecification
Brand NameHJC
Model NumberFURION 3.0 Raceday Road mtb met
TypeIntegrally-molded Helmet
MaterialABS
Air Vents8 - 15
Weight (Size M)247g
Weight (Size L)272g
Age Group(Adults) Men
CertificationEN 1078:2012+A1:2012
Package Length32 cm
Package Width23 cm
Package Height23 cm
Package Weight0.41 kg

8. User Tips

  • Lightweight Comfort: Many users appreciate the helmet's lightweight design, making it comfortable for extended rides.
  • Secure Fit: Take the time to properly adjust both the rear dial and the straps for a secure and stable fit. This is crucial for both comfort and safety.
  • Aesthetic Appeal: The helmet features a beautiful finish and innovative design, enhancing your cycling gear.
  • Size Verification: Always measure your head circumference accurately to ensure you select the correct helmet size for optimal fit and protection.

9. Warranty & Support

For warranty information, please refer to the terms provided by your retailer at the time of purchase. For direct support or inquiries, you may contact the manufacturer:

  • E-mail: willing88@126.com
  • Phone: 18106757030
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.