Lemorele Wireless HDMI Transmitter and Receiver Kit

Contents

Lemorele Wireless HDMI Video Transceiver User Manual

Model: Wireless HDMI Transmitter and Receiver Kit

1. Introduction

Thank you for choosing the Lemorele Wireless HDMI Video Transceiver. This kit provides a seamless solution for extending HDMI and VGA video signals, along with audio, wirelessly up to 50 meters (165 feet). It is designed for various applications including PC to TV connections, monitor extensions, teaching presentations, and meeting room setups, supporting high-definition 1080P at 60Hz resolution.

This manual will guide you through the setup, operation, and troubleshooting of your device to ensure optimal performance.

2. Product Overview

The Lemorele Wireless HDMI Video Transceiver Kit consists of two main components: a Transmitter (TX) and a Receiver (RX).

Lemorele Wireless Video Transceiver with key features: 165FT/50M, HD 1080P, HDMI & VGA & Audio, 5G/2.4G.

Figure 2.1: Lemorele Wireless Video Transceiver Kit

Key Features:

  • Wireless Transmission: Extends video and audio signals up to 50 meters (165 feet).
  • High Resolution: Supports 1080P@60Hz for clear and crisp visuals.
  • Dual Band Connectivity: Utilizes 2.4G and 5G dual-band wireless transmission for stable and fast connections.
  • Multiple Outputs (RX): Features HDMI, VGA, and 3.5mm Audio output ports.
  • HDMI Input (TX): Connects to your source device via HDMI.
  • Plug and Play: Simple setup for quick use.
  • Multi-Transmitter Support: Connect up to 4 transmitters to one receiver for easy switching between sources.
Wide Application and Compatibility: RX Output (HD TV, Monitor, Projector, Speaker), TX HDMI Input (Windows, Mac OS, Desktop PC).

Figure 2.2: Wide Application and Compatibility

3. Package Contents

Please check the package contents upon opening. If any items are missing or damaged, contact customer support.

  • 1 x Wireless HDMI Receiver (RX)
  • 1 x Wireless HDMI Transmitter (TX)
  • 1 x User Manual (PDF available online)
  • 1 x USB-A to Micro-USB Power Cable (for RX)
  • 1 x HDMI Cable (for RX to display)
  • 1 x USB-A to HDMI Cable (for TX to source)
Package contents and dimensions of the Wireless HD Transmitter & Receiver Kit.

Figure 3.1: Package Contents and Dimensions

For a detailed user manual, please refer to the User manual (PDF).

4. Setup Instructions

4.1. Receiver (RX) Setup

  1. Connect the RX unit to your display device (HD TV, Monitor, or Projector) using an HDMI cable for video and audio, or a VGA cable for video and a 3.5mm audio cable for sound.
  2. Connect the provided USB-A to Micro-USB power cable to the Micro-USB port on the RX unit and plug the USB-A end into a power adapter (5V/2A recommended, not included) or a powered USB port on your display.
  3. Ensure your display is set to the correct input source (HDMI or VGA) that the RX unit is connected to.

4.2. Transmitter (TX) Setup

  1. Connect the TX unit to your source device (PC, Laptop, etc.) using the integrated HDMI cable.
  2. The TX unit typically draws power from the HDMI port. If your source device's HDMI port does not provide sufficient power, connect the additional USB-A power cable (if provided) from the TX unit to a powered USB port on your source device or a USB power adapter.
  3. Driver Installation: For the first use, your operating system might prompt you to install a driver. Follow the on-screen instructions. The TX unit may appear as a 'CD Drive (G:) UDisplay' or similar, containing the necessary driver software.
Driver installation required for first use, showing 'CD Drive (G:) UDisplay'.

Figure 4.1: Driver Installation Prompt

5. Operation

5.1. Initial Connection

  1. After connecting both the TX and RX units as described in the Setup section, power on your source device and display.
  2. The TX and RX units should automatically pair. A blue indicator light on both units will confirm a successful connection.
  3. Your source device's screen should now be mirrored or extended to your display.

5.2. Display Modes (Mirror/Extend)

The system supports both Mirror Mode and Extended Mode, depending on your operating system's display settings.

  • Mirror Mode: Shows the same content on both your source device and the connected display.
  • Extended Mode: Allows you to display different content on your source device and the connected display, expanding your workspace.

You can switch between these modes via your computer's display settings (e.g., Windows Display Settings or macOS System Preferences > Displays).

Mirror Mode (show same pictures) and Extended Mode (show different pictures) demonstration.

Figure 5.1: Mirror Mode and Extended Mode

5.3. One-Touch Switching (Multiple Transmitters)

If you have purchased additional TX units (up to 4 maximum), you can connect them to different source devices and switch between them with a single touch.

  1. Connect each TX unit to its respective source device.
  2. To switch the displayed source, simply press the button on the desired TX unit. The RX unit will automatically switch to display the content from that transmitter.

Video 5.1: Product demonstration showing setup and one-touch switching in a meeting room.

6. Maintenance

  • Keep the devices clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the units to extreme temperatures, humidity, or direct sunlight.
  • Do not disassemble the devices. Tampering with the internal components will void the warranty.
  • Ensure cables are connected securely but without excessive force to prevent damage to ports.

7. Troubleshooting

Problem Possible Cause Solution
No signal on display
  • RX/TX not powered on.
  • Incorrect input source selected on display.
  • Loose cable connections.
  • TX/RX out of range or obstructed.
  • Driver not installed (for TX).
  • Ensure both units are powered and indicator lights are on.
  • Select the correct HDMI/VGA input on your display.
  • Check all HDMI, VGA, and power cable connections.
  • Move TX and RX closer, ensure clear line of sight.
  • Install the necessary driver for the TX unit.
Poor video quality (flickering, distortion)
  • Interference from other wireless devices.
  • Weak signal due to distance or obstructions.
  • Outdated graphics drivers on source device.
  • Ensure TX and RX are not near strong interference sources.
  • Try switching to the 5G band if available.
  • Reduce distance between TX and RX.
  • Update graphics drivers on your PC/laptop.
No audio
  • Audio cable not connected (for VGA).
  • Volume too low or muted.
  • Incorrect audio output selected on source device.
  • If using VGA, ensure the 3.5mm audio cable is connected from RX to speakers.
  • Check volume levels on your source device, display, and external speakers.
  • Verify the correct audio output device is selected in your source device's sound settings.

8. Specifications

Feature Specification
Brand Name Lemorele
Model Wireless HDMI Transmitter and Receiver Kit
Connector Type Wireless
Transmission Distance Up to 50m (165ft)
Resolution Support 1080P@60Hz
Wireless Bands 2.4G | 5G Dual Band
Receiver Output HDMI, VGA, 3.5mm Audio
Transmitter Input HDMI
Max Transmitters per Receiver 4
Certification CE, RoHS, FCC
Package Weight 0.45 kg
Package Dimensions (L x W x H) 20cm x 18cm x 6cm
2.4G | 5G Dual Band Wireless Transmission for stable and fast video.

Figure 8.1: Dual Band Wireless Transmission

9. User Tips

  • For optimal performance and to achieve the maximum transmission distance, ensure there is a clear line of sight between the Transmitter (TX) and Receiver (RX) units.
  • Always use the provided power cables and ensure the RX unit receives stable power (a 5V/2A adapter is recommended for best results).
  • If you experience any lag or dropped signals, try to minimize obstructions between the TX and RX, and consider switching to the 5G wireless band if your environment has heavy 2.4G interference.
  • When using the TX unit with a laptop, if the screen flickers or the connection is unstable, ensure the TX unit is also powered via its USB power cable, as some laptop HDMI ports may not provide sufficient power.

10. Frequently Asked Questions (FAQ)

Q: Do I need to install any drivers for this device?
A: Yes, for the first use, your operating system (e.g., Windows) may require a one-time driver installation for the Transmitter (TX) unit. The TX unit often appears as a virtual CD drive containing the necessary software.
Q: Can I connect multiple computers to one display using this kit?
A: Yes, the system supports connecting up to 4 Transmitter (TX) units to a single Receiver (RX). You can then switch between the different source devices with a simple one-touch button press on the TX unit.
Q: What is the maximum transmission distance?
A: The device can transmit video and audio signals wirelessly up to 50 meters (165 feet) in an open, unobstructed environment.
Q: Does this device support 4K resolution?
A: No, this model supports a maximum resolution of 1080P at 60Hz.

11. Warranty and Support

For detailed warranty information, technical support, and service inquiries, please refer to the official user manual PDF or contact Lemorele customer service.

You can access the full user manual here: Lemorele Wireless HD Transmitter & Receiver Kit User Manual (PDF).

© 2024 Lemorele. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.