1. Introduction
The DIVEDEER USB 2.0 Solderless Plug Connector provides a convenient and efficient solution for repairing or customizing USB cables without the need for soldering. This connector is designed for DIY enthusiasts and professionals alike, allowing for quick and secure connections for various USB 2.0 applications, including mobile phone charging, keyboard, and mouse connections.
2. Safety Information
- Always ensure the power source is disconnected before performing any wiring or installation.
- Handle electrical components with care to avoid short circuits or damage.
- Ensure all wire connections are secure and properly insulated to prevent electrical hazards.
- Do not use the connector in damp or wet environments.
- If you are unsure about any step, consult a qualified technician.
3. Product Overview
The DIVEDEER USB 2.0 Solderless Plug Connector is available in both male and female configurations. Each connector features screw terminals for easy and secure wire attachment, eliminating the need for soldering. The design ensures a wear-resistant and reliable connection.
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | Metal USB2.0 Solderless Connector |
| Brand Name | DIVEDEER |
| Origin | Mainland China |
| Certification | RoHS |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
5. Installation and Wiring Guide
Follow these steps to correctly wire your USB cable to the solderless connector:
- Prepare the Cable: Carefully strip the outer jacket of your USB cable to expose the internal wires. You will typically find four wires (Red, White, Green, Black) and sometimes a shielded ground wire.
- Identify Wires: Identify the function of each wire based on standard USB color coding:
- Red: VBUS (Power +5V)
- White: D- (Data -)
- Green: D+ (Data +)
- Black: GND (Ground)
- Shielded Wire: Ground (if present)
- Connect Wires: Loosen the screws on the terminal block of the solderless connector. Insert each stripped wire into its corresponding terminal slot as indicated on the connector's PCB (VBUS, D-, D+, GND). Tighten the screws firmly to secure the wires.
- Secure Shielded Wire (if applicable): If your cable has a separate shielded wire, connect it to the GND terminal or a dedicated shield terminal if available.
- Verify Connections: Double-check that each wire is securely fastened and connected to the correct terminal to ensure proper functionality and prevent short circuits.
Note on Cable Types:
- 5-core USB cable: Red-VBUS, White-D-, Green-D+, Black-GND, Shielded cable-ground.
- 4-core USB cable: Red-VBUS, White-D-, Green-D+, Black-GND.
- 2-core USB power cable: Red-VBUS, Black-GND.
6. Operating Instructions
Once the USB solderless connector is properly wired to your cable, it functions as a standard USB 2.0 plug. Simply connect it to your desired device or power source.
- For Charging: Connect the repaired cable to a USB power adapter and your mobile device.
- For Data Transfer: Connect the repaired cable between your computer and a peripheral device (e.g., keyboard, mouse, external hard drive).
7. Maintenance
- Keep the connector clean and free from dust and debris.
- Avoid exposing the connector to extreme temperatures or moisture.
- Periodically check the screw terminals to ensure wires remain securely fastened.
- Do not apply excessive force when plugging or unplugging the connector.
8. Troubleshooting
- Device not recognized or not charging:
- Check all wire connections at the solderless terminal. Ensure they are tight and correctly matched to the VBUS, D-, D+, and GND pins according to the wiring diagram (Figure 4).
- Verify the integrity of the USB cable itself.
- Test with a different USB port or device to rule out external issues.
- Intermittent connection:
- Re-tighten the screw terminals. Loose connections can cause intermittent functionality.
- Ensure the cable is not being bent or strained at the connector point.
- Connector feels loose:
- Ensure the outer jacket of the cable is properly seated within the connector's strain relief (if applicable) to prevent internal wires from being pulled.
9. Warranty and Support
For specific warranty information and customer support, please refer to the seller or your purchase documentation. General product inquiries can be directed to the manufacturer, DIVEDEER.
A user manual in PDF format may be available for download. Please check the product page or contact the seller for the link to the official documentation: View User Manual (PDF).