TDX A3

Contents

TDX Airs Pro Wireless Bluetooth Earbuds User Manual

Model: A3

1. Introduction

The TDX Airs Pro Wireless Bluetooth Earbuds are designed to provide a high-fidelity stereo audio experience with the convenience of wireless connectivity. Featuring Active Noise Cancellation (ANC) and a comfortable in-ear design, these earbuds are suitable for various audio needs. This manual provides essential information for the proper use and maintenance of your earbuds.

TDX Airs Pro Wireless Bluetooth Earbuds and Charging Case
TDX Airs Pro Wireless Bluetooth Earbuds and Charging Case.

2. Package Contents

Ensure all items are present in the package:

  • TDX Airs Pro Wireless Bluetooth Earbuds (Left and Right)
  • Charging Case
  • USB Type-C Charging Cable
  • User Manual
  • Multiple sizes of silicone ear tips
Unboxing contents of TDX Airs Pro Earbuds, showing earbuds, charging case, USB cable, and manual.
Contents of the TDX Airs Pro Earbuds package.

3. Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

4. Setup

4.1 Initial Preparation

  • Unboxing: Carefully remove all components from the packaging.
  • Protective Films: Before first use, remove any protective films from the earbuds and charging contacts.
  • Ear Tip Selection: Choose the silicone ear tips that provide the most comfortable and secure fit for your ears. Three sizes (Small, Medium, Large) are provided. A good fit is crucial for optimal sound quality and Active Noise Cancellation performance.
Earbud in ear, illustrating the importance of selecting the correct silicone ear tip size (Small, Medium, Large) for comfort and fit.
Select the appropriate ear tip size for a comfortable and secure fit.

4.2 Charging the Earbuds and Case

Before initial use, fully charge the earbuds and the charging case.

  • Place the earbuds into the charging case.
  • Connect the provided USB Type-C charging cable to the charging port on the case and to a certified 5V power adapter.
  • The indicator light on the charging case will show the charging status. Once fully charged, the indicator light may change color or turn off.

4.3 Pairing with a Device

The earbuds will automatically enter pairing mode when taken out of the charging case for the first time.

  • Open the charging case and remove both earbuds.
  • On your device (e.g., smartphone, tablet), go to Bluetooth settings.
  • Search for "Airs Pro" or a similar name in the list of available devices.
  • Select "Airs Pro" to connect. Once connected, you will hear a confirmation tone.
  • If pairing fails, place the earbuds back into the case, close the lid, wait a few seconds, then repeat the steps.

5. Operating Instructions

5.1 Power On/Off

  • Power On: Open the charging case, and the earbuds will automatically power on and connect to the last paired device. Alternatively, press and hold the touch sensor on both earbuds for approximately 3 seconds.
  • Power Off: Place the earbuds back into the charging case and close the lid. They will automatically disconnect and power off. Alternatively, press and hold the touch sensor on both earbuds for approximately 5 seconds.

5.2 Touch Controls

The earbuds feature sensitive touch controls on their stems. Refer to the diagram below for specific functions:

Diagram illustrating touch control functions for left and right earbuds.
Sensitive Touch Control Functions.
Action Function (Music) Function (Calls)
Touch once (L or R) Play/Pause Answer/End a call
Touch twice (L or R) Volume Down (L) / Volume Up (R) N/A
Touch 3 times (L or R) Previous song (L) / Next song (R) N/A
Touch and hold 2 sec (L) ANC mode ON/OFF Reject the call
Touch and hold 2 sec (R) Wake up voice assistant Reject the call

5.3 Active Noise Cancellation (ANC)

The Airs Pro earbuds feature Active Noise Cancellation, providing up to 35dB of deep noise reduction to minimize external disturbances and enhance your listening experience.

  • To toggle ANC mode ON/OFF, touch and hold the left earbud for 2 seconds.
Earbud in ear with sound waves illustrating 35dB Active Noise Cancellation.
Experience up to 35dB Active Noise Cancellation.

5.4 Bluetooth 5.4 Connectivity

Equipped with a new BT V5.4 chipset, these earbuds offer fast, steady transmission with reduced latency (as low as 68ms), ensuring a smooth audio experience for music and gaming.

Diagram of an earbud highlighting the BT V5.4 chipset, emphasizing low power consumption, low latency, and fast, stable transmission.
Advanced Bluetooth 5.4 chipset for enhanced performance.

6. Maintenance

  • Cleaning: Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
  • Storage: When not in use, store the earbuds in their charging case to protect them from dust, dirt, and damage. Keep the case in a dry place, away from extreme temperatures.
  • Water Exposure: The earbuds are NOT waterproof. Avoid exposing them to water, moisture, or sweat to prevent damage.
  • Children: Keep the earbuds and charging case out of reach of small children.

7. Troubleshooting

If you encounter any issues, try the following steps:

  • No Sound/One Earbud Not Working:
    • Ensure both earbuds are fully charged.
    • Place both earbuds back into the charging case, close the lid, wait 10 seconds, then take them out again to re-establish connection.
    • Check your device's Bluetooth settings to ensure "Airs Pro" is connected and the volume is not muted.
    • Try re-pairing the earbuds with your device. Forget the device in your Bluetooth settings and pair again.
  • Earbuds Disconnecting Frequently:
    • Ensure the earbuds are fully charged.
    • Make sure your device is within the maximum wireless range (10-20 meters) and there are no significant obstructions.
    • Try re-pairing the earbuds with your device.
  • Poor Audio Quality:
    • Ensure the ear tips are properly seated in your ears for a good seal.
    • Clean the ear tips and speaker grilles to remove any debris.
    • Try different sized ear tips for a better fit.
    • Ensure your audio source is of good quality.
  • Earbuds Not Charging:
    • Ensure the charging cable is securely connected to both the case and the power adapter.
    • Check that the charging contacts on the earbuds and inside the case are clean and free of debris.
    • Try using a different USB Type-C cable or power adapter.
  • Active Noise Cancellation Not Working:
    • Ensure ANC is activated via the touch control (touch and hold left earbud for 2 seconds).
    • Verify that the earbuds have a snug fit in your ears, as a poor seal can reduce ANC effectiveness.

8. Specifications

Feature Specification
Brand Name TDX
Model A3
Material ABS
Style TWS In-ear Headphones
Communication Wireless
Wireless Type Bluetooth
Bluetooth Version 5.4
Maximum Wireless Range 10m-20m
Active Noise-Cancellation Yes (up to 35dB)
With Microphone Yes
Vocalism Principle Dynamic
Number Of Drivers 2
Impedance Range up to 32 Ω
Sensitivity 98dB
Battery life up to 7 hours
Charging Method Charging case (Type C connector)
Waterproof No
Control Button No (Touch Control)
Volume Control No (Touch Control)
Support Memory Card No
Certification CE, FCC
Origin Mainland China

9. User Tips

Here are some tips from other users to enhance your experience:

  • Fit is Key: Experiment with the different silicone ear tip sizes to find the best fit. A snug fit not only improves comfort but also significantly enhances sound quality and the effectiveness of Active Noise Cancellation.
  • Re-pairing for Issues: If you experience issues like one earbud not working or sudden silent modes, try placing both earbuds back in the charging case, closing it for a few seconds, then reopening and re-pairing with your device. This often resolves connectivity glitches.
  • Full Charge for Best Performance: Ensure your earbuds and charging case are fully charged before extended use to avoid unexpected power depletion.
  • Check Authenticity: While many users praise the quality, if you have concerns about authenticity, compare the product details and performance with official specifications.

10. Warranty & Support

For product support, warranty information, or further inquiries, please contact the manufacturer:

  • Manufacturer: Guangdong Titecssion Industrial Co., Ltd.
  • Address: Building 4, Xingxing Industrial Zone, No.496 Fushi Road, Dashi Town, Panyu District, Guangzhou city, Guangdong Province, China.
  • Email: 13808813623@139.com

For additional guides and documents, including a PDF user manual, please refer to the official product page or contact customer support. The PDF user manual can be referenced at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.