1. Product Overview
Thank you for choosing our wireless controller set for Wii and Wii U consoles. This set includes a wireless right remote with vibration feedback and a wired left Nunchuk joystick with tilt-sensing functionality. It is designed to provide an immersive gaming experience with precise control.
Note: This is the standard version WITHOUT MotionPlus/MP (Precision Enhancer). Some games REQUIRE MotionPlus to play (e.g., Red Steel 2, The Legend of Zelda: Skyward Sword, Wii Sports Resort). This product is only compatible with games that do not require MotionPlus.

Figure 1: The controller set is perfectly compatible with both Wii and Wii U consoles.
2. Setup Instructions
Follow these steps to connect your wireless controller set to your Wii or Wii U console:
- Power Supply: Ensure your Wii console is connected to its power supply and the sensor bar and AV cables are properly connected.
- Battery Installation: The right remote requires two AA dry batteries (1.5V*AA). Ensure the total voltage does not exceed 3.0V. Open the battery cover on the back of the remote and insert the batteries. Rechargeable batteries are recommended for environmental protection.
- Nunchuk Connection: The left Nunchuk joystick is wired and connects directly to the bottom port of the right remote. No separate power supply is needed for the Nunchuk.
- Pairing the Remote:
- Locate the red SYNC button inside the battery compartment of the remote.
- On your Wii console, open the SD card slot cover (or the battery cover for Wii U) to find its red SYNC button.
- Press the SYNC button on the Wii console first, then immediately press the SYNC button on the remote.
- Wait for the player LED indicator on the remote to light up solid (usually LED 1), indicating successful pairing.
- Troubleshooting Connection: If the connection fails, press the SYNC button on the console for 15 seconds to clear all previously connected controllers. Then, repeat the pairing process for the remote and console separately.

Figure 2: Visual guide for connecting the Wii Remote to the console.

Figure 3: Location of the SYNC button and battery compartment on the back of the remote.
3. Operating Instructions
This controller set offers dual somatosensory and vibration experiences for enhanced gameplay.
Right Remote (Wireless)
- Motion Sensing: The remote detects infrared signals and 3D somatosensory movements, allowing for intuitive control in games.
- Vibration Feedback: Equipped with a built-in vibration motor, the remote provides realistic feedback during in-game collisions, strikes, and other scenarios.
- Buttons: Includes Power, D-pad, A, Plus (+), Minus (-), Home, 1, 2 buttons, and a built-in speaker.
- Wireless Range: Effective wireless reception up to 8 meters from the console.
Left Nunchuk (Wired)
- Tilt Sensing: The Nunchuk supports tilt sensing, allowing you to control character direction and actions by moving the joystick.
- Joystick & Buttons: Features an analog joystick for movement and C and Z buttons for additional in-game actions.

Figure 4: Diagram showing the main components and buttons of the Wii Remote and Nunchuk.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controllers. Do not use liquid cleaners or solvents.
- Silicone Cover: The included silicone protective case helps prevent damage from drops and scratches. Keep it on during use.
- Battery Care: Remove batteries from the remote if it will not be used for an extended period to prevent leakage.
- Storage: Store controllers in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
- Controller Not Connecting:
- Ensure batteries in the remote are fresh and correctly inserted.
- Verify the pairing process (Section 2) is followed correctly.
- Clear all connected controllers from the console by pressing the console's SYNC button for 15 seconds, then re-attempt pairing.
- Input Lag or Disconnections:
- Ensure you are within the 8-meter wireless range of the console.
- Check for potential interference from other wireless devices.
- Vibration Not Working: Check in-game settings to ensure vibration is enabled.
6. Specifications
| Model Number | 8512+8530 (V1.1) |
| Compatible Brand/Model | Nintendo (Wii, Wii U) |
| Type | Gamepads |
| Trigger Button Type | Non-Linear |
| Battery Required | 2 x AA (not included) |
| Wireless Range | Up to 8 meters |
| Product Weight | 0.22 kg |
| Package Dimensions | 15cm x 15cm x 5cm |
| Origin | Mainland China |
7. User Tips
- Safety First: Always use the included wrist strap, especially during active motion-sensing games, to prevent the remote from slipping and causing damage or injury.
- Game Compatibility: Before playing, check if your game requires MotionPlus/MP. This controller set is a standard version and does not include MotionPlus functionality.
- Battery Choice: For best performance and environmental benefits, consider using rechargeable AA batteries.
- Full Set: The product includes both the Wii Remote and the Nunchuk, providing a complete control solution for compatible games.
8. Warranty and Support
For detailed information, diagrams, and multilingual instructions, please refer to the official user manual PDF available at: User Manual (PDF).
If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer for further assistance.