1. Safety Information
- Use 1.5V Alkaline AA batteries; do NOT use 1.2V batteries. Batteries may explode or leak. Used-up batteries must be removed from the device and disposed of properly.
- The device should be used with cold water ONLY.
- Do NOT leave the device outside when freezing days. Water freezing and expanding inside the device may damage it.
- Do NOT use recycled or dirty water. Impurities such as grit in the water may damage the valve of the device.
- Do NOT use a storage tank for water supply; the tank cannot open the valve properly without external pressure. Tap water access is required.
2. Package Contents
The Meross MST200 Smart Sprinkler Timer package includes:
- Smart Sprinkler Timer x 1
- User Manual x 1
- PTFE Tape x 1
- Smart Hub x 1 (Included in the kit product package only)
- USB Cable x 1 (Included in the kit product package only)
- Power Adapter x 1 (Included in the kit product package only)
Image: Components of the Meross Smart Sprinkler Timer kit, including the timer, hub, USB cable, power adapter, and PTFE tape.
3. Getting to Know Your Sprinkler Timer
Diagram: Front view of the Smart Sprinkler Timer with key components labeled.
Sprinkler Timer Components:
- Water Inlet: Connects to your outdoor faucet.
- LED Light:
- Blink once: Each time the device is powered on, or when the timer valve opens/closes.
- Blink rapidly: Indicates pairing mode.
- Lights up for 5 seconds: Indicates successful pairing with the smart hub.
- Button:
- Press once to start/stop watering (default 15 minutes).
- Double press any button to enter pairing mode.
- Press and hold any button for 5 seconds until the LED lights up to factory reset.
- Water Outlet: Connects to your hoses.
Diagram: Internal view of the Smart Sprinkler Timer showing the battery compartment and its wireless connection to the Smart Hub.
Smart Hub Components:
- Wireless Communication: Maximum communication range of 100m (328ft). To maintain good communication, minimize obstacles like walls between the hub and the sprinkler timer.
- Battery Compartment: Install 4 x 1.5V Alkaline AA batteries. Note: Due to the waterproof design, the battery compartment may be tight. Use a screwdriver to gently pry it open if needed.
4. Installation Guide
4.1. Download the Meross App
Download the Meross app from the App Store or Google Play. You can also scan the QR code below:
Image: Meross app download options and QR code for easy installation.
4.2. Set Up the Device
- Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network. The smart hub only supports 2.4GHz Wi-Fi.
- Ensure your smart hub is covered by a strong 2.4GHz Wi-Fi signal. Place the hub no more than 100m (328ft) away from where the sprinkler timer will be installed, and minimize obstacles like walls between them.
- Launch the Meross app and log in to your account. If you are a new user, tap 'Sign up' to create a new account.
- Tap the "+" icon to select the type of Smart Sprinkler Timer, then follow the setup wizard to finish the configuration.
Note:
- You need to set up the smart hub, then pair it with the Timer as guided by the app.
- Due to the Apple Home app design, the HomeKit-supported hub will not show up in the Home app after successful setup. You can go to the Home app, tap the menu button in the upper right corner, and tap Home Settings to view information about the smart hub.
- For more information, visit https://www.meross.com/support.
5. How to Use
Image: Meross app interface demonstrating the 'Water Only When Needed' feature with rain skip notifications.
5.1. Device Control Page
- Zones: Switch between watering zones.
- Irrigation: Start or stop watering. Displays a watering countdown.
- Event: Shows past and future watering events.
- Plan: View, create, and edit watering plans.
- Device settings: Tap the icon in the top right corner to access the Device Settings page.
5.2. Device Settings
- Device icon: Set the device icon.
- Device name: Set the device name.
- Zones: Configure zone settings.
- Room: Assign the timer to a specific room.
- Default duration time: Set the default watering duration. Whether activated by button, app, or voice control, watering will automatically stop after this period to prevent waste and flooding.
- Water usage: Access a dashboard to view your water usage by day, week, and month.
- Water flow measurement: Enable or disable this function and calibrate the water flow rate.
- Smart weather skip: Configure parameters for the smart sprinkler timer to skip watering schedules during bad weather (rain, frost, wind, etc.) to protect plants and conserve water.
- Units: Choose between U.S. or metric units.
- Battery: View the battery level.
- Notification: Enable or disable device notifications.
- User manual: Access the user manual (PDF available at https://manuals.plus/m/f5107ca628a6001a18e6f5b1baddc4ac7536c5a0d0014e831c9218f28edc63d5).
5.3. Link Meross to Google Assistant or Amazon Alexa
Set up the device in the Meross app and link it to your preferred voice assistant.
- Link to Amazon Alexa: Go to User -> Amazon Alexa and allow Meross to link with Alexa.
- Link to Google Assistant: Go to User -> Google Assistant and allow Meross to link with Google.
Image: The Meross Smart Sprinkler Timer supports various smart home platforms including Alexa, Apple Home, Google Home, and SmartThings.
6. User Tips
- Ensure you have 4 AA alkaline batteries ready for the sprinkler timer, as they are often included and allow for immediate setup.
- For optimal performance, ensure your smart hub is within 100m (328ft) of the sprinkler timer and minimize physical obstructions.
7. Troubleshooting (FAQ)
At Meross, we strive to assure your satisfaction. Below is a list of frequently asked questions:
7.1. How does the Smart Weather Skip work?
The timer checks local weather for the past and future day some time before the watering schedule runs. If yesterday's rainfall plus tomorrow's predicted rainfall exceeds the weather skip threshold, the timer will skip running the schedule.
7.2. Can the device still water on schedule when it loses its internet connection?
Yes, watering plans are stored directly on the sprinkler timer, so they can run at any time regardless of internet connection. However, the weather skip feature does not work when disconnected.
7.3. What should I do if I experience water hammer?
Unlike mechanical faucets, smart water valves are more likely to cause water hammer. Minor water hammer will not harm your pipes. You can mitigate water hammer by installing a water hammer arrestor or by partially shutting off the faucet to reduce water pressure.
7.4. How to fix a HomeKit pairing failure?
Please visit https://www.meross.com/support/FAQ/230.htm for the solution.
To learn more, you can visit https://www.meross.com/support/fags to find solutions for more frequently asked questions.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Meross |
| Model Number | MST200 |
| Wireless Communication | WiFi |
| Communication Method | Wi-fi |
| Power Source | AC |
| Battery Included | No (requires 4x 1.5V Alkaline AA batteries) |
| Inbox Adaptor | Yes (for Smart Hub) |
| Origin | Mainland China |
| Package Length | 20 cm |
| Package Width | 20 cm |
| Package Height | 10 cm |
| Package Weight | 1.1 kg |
Operating Frequency
No restrictions exist in the use of radio frequencies or frequency bands in all EU member states, EFTA countries, Northern Ireland and Great Britain.
- Smart Hub: 2400MHz~2483.5MHz / 20dBm (max output power)
- Smart Sprinkler Timer/Smart Hub: 433.050MHz~434.790MHz / 10dBm (max output power)
9. Warranty and Support
9.1. Warranty
Meross products are covered by a 24-month warranty from the date of purchase. Please visit https://www.meross.com/support/warranty for detailed information on warranty policy and product registration.
9.2. Disclaimer
- The function of this smart device is tested under typical circumstances described in our specifications. Meross does NOT guarantee that the smart device will perform exactly as described under all circumstances.
- By using third-party services including but not limited to Amazon Alexa, Apple HomeKit, and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross's total liability is limited to what is expressly covered in its Privacy Policy.
- Damages arising from ignorance of the SAFETY INFORMATION will not be covered by Meross after-sales service, nor does Meross take any legal responsibility therefrom. Customers acknowledge understanding of these articles by reading this manual.
9.3. Support
For support and further information, please visit:
- Support Website: www.meross.com/support
- Official Website: www.meross.com
- Email: support@meross.com
- Product Compliance Questions: security@meross.com
10. Compliance Information
10.1. Declaration Of Conformity
Meross hereby declares that the device is in compliance with essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU. The original EU Declaration of Conformity may be found at https://www.meross.com/support/eudoc.
10.2. FCC Compliance Information Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
10.3. Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.