Introduction
Thank you for purchasing the LZJV NX331 Portable Steam Cleaner. This powerful and versatile appliance is designed for high-temperature sterilization and effective cleaning across various surfaces in your home, car, kitchen, and even air conditioners. Please read this manual thoroughly before first use to ensure safe operation and optimal performance.


Important Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury:

- Do not allow to be used as a toy.
- Do not use with damaged cord or plug.
- Do not use steam cleaner if it has been dropped, damaged, left outdoors or dropped into water.
- Do not service Steam Cleaner while it is plugged in.
- Avoid contact with hot surfaces.
- Burns can occur from touching hot metal parts, hot steam. Do not turn upside down as there may be hot water in the unit. Never direct steam at any person. The steam is very hot and can cause burns.
- Do not expose to rain.
- Store indoors.
- Do not place or store unit where it can fall or be pulled into a sink or tub.
- Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
- Close supervision is necessary for any appliance being used by or near children.
- Do not leave the system unattended while connected.
- Do not leave the steam cleaner connected to an electrical outlet when not in use.
- Do not attempt to use without water in the tank.
Package Contents
Please check the package contents to ensure all items are present and undamaged:

- Main Steam Cleaner Unit with Water Tank
- Corrugated Tube (Steam Hose)
- Handle with Remote Control and Adapter
- Power Line (Power Cord)
- High Temperature Nozzle
- Side Steel Brush
- Small Nylon Brush
- Large Nylon Brush
- Brass Brush
- Window Scraper
- Window Scraper with Towel Cover
- Extended Spray Bar (Extended Sprayer Rod)
- Sealing Rings (O-rings)
- Cleaning Needle
- Scraper Cloth Cover
- Inlet Safety Cover
Specifications
| Feature | Specification |
|---|---|
| Brand Name | LZJV |
| Model Number | NX331 |
| Cleaner Type | Steam Cleaner |
| Type | Handheld |
| Power (W) | 2401-2600W |
| Steam Duration | >30 minutes |
| Water Shortage Alarm | Yes |
| Certification | CE |
| Origin | Mainland China |
| Package Length | 25 cm |
| Package Width | 28 cm |
| Package Height | 32 cm |
| Package Weight | 1.8 kg |
Setup Instructions
- Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Fill Water Tank: Locate the water tank on the main unit. Open the inlet safety cover and fill the tank with clean tap water. Do not overfill. Ensure the inlet safety cover is securely closed after filling.
- Attach Corrugated Tube: Connect the corrugated tube (steam hose) to the main unit's steam outlet. Twist until it is firmly secured.
- Attach Handle/Spray Gun: Connect the handle/spray gun to the other end of the corrugated tube.
- Insert Batteries (if applicable): If your handle/spray gun has a remote control feature, insert two AAA batteries into the designated compartment in the handle.
- Attach Desired Nozzle: Select the appropriate nozzle or brush for your cleaning task (e.g., High Temperature Nozzle, Nylon Brush, Brass Brush, Window Scraper) and attach it to the spray gun. For extended reach, connect the Extended Spray Bar between the spray gun and the nozzle.
- Power Connection: Plug the power cord into a suitable electrical outlet (refer to specifications for voltage requirements).
Operating Instructions
- Power On: Press the power button on the main unit. The digital display will illuminate, and the preheating indicator light will turn on.
- Preheating: Allow the unit to preheat. This typically takes 1-20 seconds. The preheating indicator light will turn off or change color when the unit is ready to produce steam.
- Adjust Steam Output: The unit features a 6-speed adjustment for steam output. Use the controls on the main unit or the remote control on the handle to select the desired steam intensity. Start with lower settings for delicate surfaces and increase as needed for tougher stains.
- Begin Cleaning: Direct the nozzle towards the surface to be cleaned. Press the steam release button on the handle (if present) or the main unit to release steam. Move the nozzle slowly over the surface.
- Water Shortage Alarm: If the water level in the tank becomes too low, the water shortage alarm will activate. Stop operation immediately, unplug the unit, allow it to cool, and refill the water tank.
- Switching Accessories: To change nozzles or brushes, ensure the unit is unplugged and has cooled down sufficiently to avoid burns.
- Power Off: After cleaning, press the power button to turn off the unit. Unplug the power cord from the outlet.



Maintenance
- Draining Water: After each use, ensure the unit is cool and unplugged. Carefully drain any remaining water from the tank.
- Cleaning Accessories: Clean all nozzles and brushes with water and mild detergent. Rinse thoroughly and allow to air dry.
- Cleaning the Unit: Wipe the exterior of the main unit with a damp cloth. Do not immerse the unit in water.
- Descaling (Periodically): Depending on water hardness, mineral deposits may build up. Consult the full PDF manual for detailed descaling instructions.
- Storage: Store the steam cleaner and its accessories in a cool, dry place, away from direct sunlight and out of reach of children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam or weak steam output |
|
|
| Unit not turning on |
|
|
| Water leaking from hose/nozzle |
|
|
| Water Shortage Alarm activates frequently |
|
|
User Tips
- Start with Lower Settings: The steam cleaner offers 6-speed adjustment. For general cleaning and to avoid excessive steam, start with lower power settings. Higher settings are best for very tough, caked-on grime.
- Effective for Tough Stains: Users have found this cleaner highly effective for removing stubborn stains like paint, grease on kitchen hoods, and grime on stove tops.
- Versatile Cleaning: Excellent for detailed cleaning in tight spaces such as tile grout, bathroom crevices, around washing machines, refrigerators, and windows.
- Quick Heat-up: The unit heats up very quickly, typically within 1-20 seconds, allowing for fast deployment.
- Pump-Driven System: The pump-driven steam release system is generally considered safer than traditional pressure-based systems, making it suitable for home use.
- Consider Water for Heavy Dirt: For extremely heavy dirt, some users note that a combination of water and steam can be more effective than steam alone, especially with the unit's strong water flow.
Frequently Asked Questions (FAQ)
- Q: How long does it take for the steam cleaner to heat up?
- A: The unit heats up quickly, typically within 1 to 20 seconds, depending on the initial water temperature and selected power setting.
- Q: Can I use cleaning solutions with the steam cleaner?
- A: This steam cleaner is designed to clean with water only. Using chemical cleaning solutions may damage the unit and void the warranty. For specific cleaning agents, please consult the full PDF manual or manufacturer.
- Q: What is the purpose of the 6-speed adjustment?
- A: The 6-speed adjustment allows you to control the intensity of the steam output, making it suitable for various cleaning tasks and surfaces, from delicate to heavily soiled areas.
- Q: What should I do if the water tank runs out during cleaning?
- A: The unit has a water shortage alarm. If it activates, immediately stop operation, unplug the unit, allow it to cool down, and then refill the water tank. Do not operate the unit without water.
Warranty & Support
For detailed warranty information, technical support, or to access the complete user manual, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
If you encounter any issues not covered in this manual, please contact the seller or manufacturer's customer service for assistance.