CABLETIME CT-BT02

Contents

Mini Bluetooth 5.1 Car Adapter AUX-in Wireless Receiver

Model: CT-BT02 | Brand: CABLETIME

1. Introduction

This manual provides essential information for the safe and effective use of your CABLETIME Mini Bluetooth 5.1 Car Adapter AUX-in Wireless Receiver. This device allows you to stream music and make hands-free calls in your vehicle or other audio systems equipped with an AUX input and USB power source. Please read all instructions carefully before use.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • This product is only for civilian vehicles. Improper use may cause vehicle failure or safety accidents.
  • Installation and disassembly must be carried out when the vehicle is turned off and the power supply is cut off. It is recommended to be operated by professional personnel; non-professionals should not operate blindly to avoid electric shock or vehicle damage.
  • Stop using immediately if the product is damaged, deformed, loose or fails. Continued use may cause safety hazards.
  • Keep away from fire, high temperature, open flame and sharp objects. Do not expose to direct sunlight for a long time to avoid product aging, deformation or short circuit.
  • This product does not replace the original vehicle safety parts. Do not use it to replace the vehicle's core safety components (such as brakes, steering parts, etc.).

3. Setup Instructions

Follow these simple steps to set up your Bluetooth receiver:

  1. Connect the USB and AUX: Plug the USB connector into a power source (e.g., car USB port, USB charger) and the 3.5mm AUX connector into your car's AUX input or other audio system.
  2. Turn on Bluetooth: On your smartphone or other audio device, enable Bluetooth.
  3. Pair with CT-BT02: Search for available Bluetooth devices and select "CT-BT02" to connect. Once connected, you will hear an audio confirmation or see an indicator light.
  4. Enjoy your music: Start streaming audio from your device to your car's speakers.
Diagram showing three easy steps to connect the Bluetooth receiver: 1. Connect USB and AUX. 2. Pair via Bluetooth. 3. Enjoy music.
Figure 3.1: Quick Setup Guide
A man driving a car with a smartphone displaying a call and a Bluetooth connection notification for 'CT-BT02'.
Figure 3.2: Bluetooth Pairing and Hands-Free Calling in a Car

Compatibility

The CABLETIME Bluetooth receiver is widely compatible with various audio devices and systems:

Diagram illustrating wide compatibility of the Bluetooth receiver with devices such as Amplifier, Speaker, Headphone, Car, Laptop, Smartphone, Tablet, and MP3 players.
Figure 3.3: Wide Device Compatibility

4. Operating Instructions

The device features intuitive controls for music playback, calls, and voice assistant activation.

Quick Operation Guide table showing button functions: Previous Song/Volume +, Next Song/Volume -, Activate Bass, Microphone, USB Charging, AUX Audio. Also lists functions for Music Mode, Hands-free Mode, and Voice Assistant.
Figure 4.1: Quick Operation Guide

Button Functions:

Control Function
▲ (Up Arrow) Previous Song / Volume +
▼ (Down Arrow) Next Song / Volume -
Bass Button (Music Note Icon) Activate Bass Boost
Microphone Icon Built-in Microphone for calls
USB Connector Power Input (USB Charging)
AUX Audio Jack Audio Output to Speaker System

Modes of Operation:

  • Music Mode:
    • Short press the main button (phone icon) to Pause/Play music.
    • Use ▲ / ▼ buttons for track navigation and volume adjustment.
    • Press the Bass button to activate bass boost for a deeper sound.
  • Hands-free Mode:
    • Short press the main button (phone icon) to Answer/Hang up calls.
    • Double-press the main button to Redial the last number.
    • Long-press the main button to Reject an incoming call.
    • During a call, long-press the main button for private calling (transfer call to phone).
  • Voice Assistant:
    • Long-press the main button (phone icon) for 2 seconds to activate your device's voice assistant.
Image highlighting the bass boost functionality of the device, showing sound waves emanating from the receiver.
Figure 4.2: Bass Boost Functionality

5. Maintenance

  • Keep the product clean.
  • Avoid contact with corrosive substances (such as acid, alkali, gasoline, etc.).
  • Do not disassemble, modify, or cut the product arbitrarily.
  • Store in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your Bluetooth receiver, consider the following:

  • No Power: Ensure the USB connector is securely plugged into a working USB power source.
  • No Audio: Check that the 3.5mm AUX connector is fully inserted into your audio system's AUX input. Verify your car stereo or audio system is set to the AUX input mode. Ensure your phone's volume is up.
  • Cannot Pair: Make sure the device is powered on and within range of your phone. Turn off and on your phone's Bluetooth, then try searching for "CT-BT02" again. If previously paired, try forgetting the device on your phone and re-pairing.
  • Poor Audio Quality: Ensure there is no interference from other electronic devices. Check that both the USB and AUX connections are secure.
  • Call Issues: Ensure the microphone is not obstructed. Check your phone's call settings.
  • Device Damage: If the product is damaged, deformed, loose, or fails, stop using it immediately to prevent safety hazards.

7. Specifications

Feature Detail
Product Name Mini Bluetooth 5.1 Car Adapter AUX-in Wireless Receiver
Model CT-BT02
Bluetooth Version 5.1
Connectivity AUX-in (3.5mm Jack), USB (for power)
Features Hands-Free Calling, Music Streaming, Bass Boost, Built-in Microphone, Voice Assistant Support
Package Dimensions (approx.) Length: 15 cm, Width: 10 cm, Height: 5 cm
Package Weight (approx.) 0.055 kg
Origin Mainland China
Certification NONE (as per provided data)
Close-up image of the Mini Bluetooth 5.1 Car Adapter, highlighting its compact design and Bluetooth 5.1 capability.
Figure 7.1: CABLETIME Mini Bluetooth 5.1 Receiver

8. Warranty & Support

Compliance Information

This product complies with EU safety requirements and relevant EU Regulations, including GPSR (EU) 2023/988, REACH Regulation, Regulation (EU) 2018/858, Regulation (EU) 2019/2144, and Regulation (EU) 168/2013.

The product bears the CE Mark, indicating conformity with European health, safety, and environmental protection standards.

Manufacturer Information

Manufacturer: Shijiazhuang Qi Gang Jiu Commercial and Trade Co.,Ltd
Building 4, Zhongshan Shangjun, Changjiang Street, High-tech Zone, Shijiazhuang CityHebei Province, China

EU Authorized Representative: EC|REP:SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabra da, Madrid, 28947 Spain

For detailed information and further assistance, please refer to the official user manual PDF available at: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.