Introduction
Thank you for choosing the GOXAWEE 1166000 Professional Handheld Metal Detector. This device is designed for precise pinpointing of metallic objects, making it an ideal tool for treasure hunting, archaeological exploration, and various detection tasks. Its 360° detection capability, proportional audio/vibration alerts, and robust IP66 water and dust protection ensure reliable performance in diverse environments. Please read this manual thoroughly before operating the device to ensure safe and effective use.

Parts Overview
Familiarize yourself with the components of your GOXAWEE 1166000 metal detector:

- Battery Compartment: Located at the top, where the 9V battery is inserted.
- Sound/Vibration Alarm: Provides audible and/or vibratory alerts when metal is detected.
- Power Switch: Controls the ON/OFF state of the device.
- LED Light: Illuminates the detection area, useful in low-light conditions.
- Scanning Area: The tip of the detector responsible for sensing metallic objects.
Setup
- Battery Installation:
- Twist the battery compartment cap counter-clockwise to open.
- Insert a single 9V battery, ensuring correct polarity (+/-).
- Replace the cap and twist clockwise until securely fastened.
- Attaching the Holster and Lanyard:
- Attach the belt holster to your belt for easy access.
- Secure the coiled lanyard to the detector and your belt or clothing to prevent accidental loss.

Orange GP-POINTER metal detector with belt holster and coiled lanyard. 
Black GP-POINTER metal detector with belt holster and coiled lanyard.
Operating Instructions
- Power On/Off: Press the power switch button to turn the detector ON. Press and hold the button for a few seconds to turn it OFF.
- Detection:
- Hold the detector with the scanning area pointed towards the target area.
- Move the detector slowly and steadily over the surface. The 360° detection allows for broad scanning.
- When a metallic object is detected, the device will emit proportional audio and/or vibration alerts. The intensity of the alert increases as you get closer to the target.
- Use the pinpointing tip for precise location of the object once a general area is identified.
- LED Light: The built-in LED light automatically activates when the detector is on, providing illumination for dark or dimly lit search areas.
- Water and Dust Protection: The GOXAWEE 1166000 is rated IP66, meaning it is protected against dust ingress and powerful water jets. It can be used in wet conditions or submerged briefly in shallow water, but is not designed for prolonged underwater use.


Maintenance
- Cleaning: After each use, especially in dirty or wet conditions, wipe down the detector with a damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the detector in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.
- Battery Replacement: Replace the 9V battery when the detection sensitivity decreases or the alerts become weak.
- Avoid Extreme Temperatures: Do not expose the detector to extreme heat or cold, as this can affect its performance and battery life.
Troubleshooting
- No Power:
- Check if the 9V battery is correctly installed with the right polarity.
- Replace with a fresh 9V battery.
- Ensure the battery compartment cap is securely tightened.
- Weak or Inconsistent Detection:
- The battery might be low. Replace it with a new 9V battery.
- Ensure there are no other strong electromagnetic fields nearby that could interfere with the detector.
- Clean the scanning area of any dirt or debris.
- False Alarms:
- Ensure you are not operating the detector near large metal objects (e.g., fences, rebar in concrete).
- Interference from other electronic devices can cause false alarms. Move away from such sources.
Specifications
| Feature | Specification |
|---|---|
| Model Number | 1166000 |
| Operating Temperatures | 35°F (-37°C) to 158°F (70°C) |
| Operating Frequency | 12kHz |
| Water and Dust Protection | Meets IEC60529 IP66 standards |
| Tuning | Automatic |
| Indicators | Proportional audio/vibration pulse rate |
| Controls | Power switch |
| Dimensions (Length) | 9" (22.9cm) |
| Dimensions (Thickness) | 1.5" (3.8cm) tapered to 0.875" (2.2cm) |
| Weight (with battery) | 7oz. (0.2kg) |
| Battery Type | Single 9V Battery |
| Battery Life (Carbon) | 16 hours |
| Battery Life (Alkaline) | 30 hours |
| Battery Life (Rechargeable) | 8 hours |
For a detailed document, you may refer to the User manual (PDF).
User Tips
- Practice Makes Perfect: Before heading out for serious treasure hunting, practice with known metal objects in different soil conditions to get a feel for the detector's responses.
- Slow and Steady: Move the detector slowly over the search area. Rushing can cause you to miss smaller or deeper targets.
- Battery Management: Always carry a spare 9V alkaline battery, as they offer the longest operating time. Rechargeable batteries are convenient but have shorter life per charge.
- Environmental Awareness: Be mindful of your surroundings. While the device is water-resistant, avoid prolonged submersion or exposing it to harsh chemicals.
Warranty and Support
The GOXAWEE 1166000 Handheld Metal Detector is designed for durability and performance. For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.