1. Introduction
Thank you for choosing our CNC Aluminum Alloy Brake and Clutch Levers. These high-quality levers are designed to provide enhanced control and a personalized riding experience for your Honda CL500, CL250, or CL300 motorcycle. Featuring a durable T6-6061 aluminum alloy construction and a 6-position 'Roll-N-Click' adjustment mechanism, these levers offer a perfect fit and improved ergonomics.
Figure 1: CNC Aluminum Alloy Brake and Clutch Levers (various colors shown, with an installed black lever).
2. Safety Information
Please read and understand all instructions before installation and use. Improper installation or adjustment can lead to loss of control and serious injury. If you are unsure about any part of the installation process, consult a qualified motorcycle mechanic.
- Always ensure the motorcycle is stable and turned off before beginning installation.
- Wear appropriate safety gear, including gloves and eye protection.
- After installation, thoroughly test the brake and clutch functions in a safe environment before riding.
- Regularly inspect levers for wear, damage, or loose fasteners.
3. Package Contents
Your package should contain the following items:
- 1x CNC Aluminum Alloy Brake Lever
- 1x CNC Aluminum Alloy Clutch Lever
Note: Specific fasteners or additional components may vary. Please ensure all parts are present and undamaged upon receipt.
4. Specifications
| Feature | Specification |
|---|---|
| Material | T6-6061 CNC Aluminum Alloy |
| Condition | 100% New, High Quality, Durable |
| Length | Approximately 147-150mm |
| Adjustment | 6-position 'Roll-N-Click' Adjustment |
| Surface Design | 5D feel surface for enhanced grip and ergonomics |
| Available Colors | Black, Gold, Blue, Red, Grey, Beige, Ivory, Green |
| Compatibility | Honda CL500, CL250, CL300 (2023-2025) |
| Origin | Mainland China |
Figure 2: Lever diagram illustrating the 6-speed adjustment and 147mm length.
5. Setup & Installation
These levers are designed for direct replacement of your motorcycle's original clutch and brake levers. The process generally involves removing the old levers and installing the new ones using the existing pivot bolts and hardware. If you have access to the official user manual (PDF), you may find additional diagrams or specific torque values there. A PDF user manual is available for reference: View User Manual (PDF).
General Installation Steps:
- Prepare the Motorcycle: Park the motorcycle on a level surface, engage the parking brake (if applicable), and turn off the engine.
- Remove Old Levers:
- For the brake lever, carefully remove the pivot bolt that secures the lever to the master cylinder assembly. Disconnect any brake light switch wires if present.
- For the clutch lever, remove the pivot bolt. Disconnect the clutch cable from the lever. You may need to loosen the cable adjuster to create slack.
- Install New Levers:
- Clutch Lever: Attach the clutch cable to the new clutch lever. Insert the new clutch lever into the perch and secure it with the pivot bolt. Ensure the cable is routed correctly and adjust cable slack as needed (refer to your motorcycle's service manual for proper free play).
- Brake Lever: Insert the new brake lever into the master cylinder assembly. Reconnect any brake light switch wires. Secure the lever with the pivot bolt.
- Tighten Fasteners: Tighten all pivot bolts and other fasteners to the manufacturer's recommended torque specifications. Do not overtighten.
- Test Functionality: Before riding, thoroughly test both the brake and clutch levers. Ensure smooth operation, proper engagement, and disengagement. Check for any binding or excessive play.
6. Operating Instructions: 6-Speed Adjustment
These levers feature a 6-position 'Roll-N-Click' adjustment mechanism, allowing you to customize the reach of the lever to your hand size and preference. This adjustment is crucial for comfort and control.
Adjusting the Lever Reach:
- Locate the adjustment dial or lever on the front side of the brake and clutch levers (refer to Figure 2).
- While the motorcycle is stationary and safe, gently push the lever forward slightly to relieve tension on the adjustment mechanism.
- Rotate the 'Roll-N-Click' adjuster to select one of the six available positions. Each click corresponds to a different lever reach setting.
- Test the feel of the lever in each position to find the most comfortable and effective reach for your riding style.
- Ensure the adjuster is securely clicked into place before riding.
Note: It is recommended to adjust both the brake and clutch levers to a similar comfortable reach for consistent control.
7. Maintenance
To ensure the longevity and optimal performance of your CNC aluminum alloy levers, follow these maintenance guidelines:
- Cleaning: Clean the levers regularly with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Lubrication: Periodically apply a small amount of appropriate grease or lubricant to the pivot points of the levers and the adjustment mechanism to ensure smooth operation.
- Inspection: Regularly check the levers for any signs of wear, bending, cracks, or loose fasteners. Ensure the adjustment mechanism operates smoothly and securely.
- Fastener Torque: Verify that all mounting bolts are tightened to the motorcycle manufacturer's specifications.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Levers feel stiff or sticky | Lack of lubrication, dirt/debris, overtightened pivot bolt | Clean and lubricate pivot points. Check pivot bolt torque. |
| Brake/Clutch not engaging/disengaging properly | Improper cable adjustment (clutch), air in brake line (brake), incorrect lever reach setting | Adjust clutch cable free play. Bleed brake system (if applicable). Adjust lever reach. Consult a mechanic if issues persist. |
| Lever adjustment mechanism is loose or doesn't click | Worn mechanism, debris | Clean the adjustment mechanism. If worn, replacement may be necessary. |
9. User Tips
- Personalized Feel: Experiment with the 6-speed adjustment to find the perfect lever reach that maximizes your comfort and control, especially during long rides or aggressive maneuvering.
- Regular Checks: Make it a habit to quickly check the tightness of your levers and the functionality of your brakes and clutch before each ride.
- Cleanliness: Keeping your levers clean not only maintains their appearance but also prevents dirt from interfering with the smooth operation of the pivot and adjustment mechanisms.
10. Frequently Asked Questions (FAQ)
- Q: Are these levers difficult to install?
- A: Installation is generally straightforward for those with basic mechanical skills and tools, as they are designed as direct replacements. However, if you are uncomfortable, professional installation is recommended.
- Q: How do I know which adjustment setting is best for me?
- A: The best setting is subjective. Experiment with different positions while stationary until you find a reach that allows for comfortable and full engagement/disengagement of the brake and clutch with your fingers.
- Q: Can these levers be used on other Honda models?
- A: These levers are specifically designed for Honda CL500, CL250, and CL300 models from 2023-2025. Compatibility with other models is not guaranteed.
11. Warranty & Support
For any questions regarding installation, operation, or potential issues, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.