ANNKE N54WHF-I51CP

Contents

ANNKE 5MP Wireless Home Camera System User Manual

Model: N54WHF-I51CP

1. Introduction

Thank you for choosing the ANNKE 5MP Wireless Home Camera System. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your security system. Please read this manual thoroughly before use and keep it for future reference.

ANNKE 5MP Wireless Home Camera System overview with two cameras and Homebase
Figure 1: ANNKE 5MP Wireless Home Camera System overview, showing two cameras and the Homebase, highlighting 5MP resolution, 4CH NVR, Two-Way Talk, Human Detection, Color Night Vision, and Pan 270° & Tilt 90° capabilities.

2. Product Description

The ANNKE 5MP Wireless Home Camera System includes a Homebase and two 5MP cameras, designed for comprehensive home security with advanced features.

2.1 Homebase Components

The Homebase acts as the central hub for your camera system. Its components include:

  • Channel Indicator Light: Located on the front, displays the status of connected camera channels (1-4).
  • Network Indicator Light (NET): Located on the front, shows network connectivity status.
  • Reset Button: Located on the front, below the NET indicator.
  • Pairing Button (sync): Located on the front, below the Reset button.
  • Network Port: Located on the rear, for wired network connection.
  • Speaker: Located on the rear, provides audio feedback and alerts.
  • Type-C Charging Port (USB): Located on the rear, for power input.
  • Micro SD card slot (TF): Located on the rear, for local storage of recordings.

2.2 Camera Types and Components

The system may include various camera types. Below are descriptions of their key components:

2.2.1 Battery Bullet Camera

This camera features an antenna, a status light, infrared and white lights for night vision, a PIR sensor for human detection, a power switch, microphone, lens, charging light, Type-C charging port, reset button, Micro SD card slot, and a speaker.

2.2.2 Battery PT Camera

This camera includes an antenna, status light, lens, microphone, infrared and white lights, a PIR sensor, Type-C charging port, power switch, speaker, reset button, and a Micro SD card slot.

2.2.3 Wired Bullet Camera

This camera is equipped with a speaker, antenna, lens, infrared light, microphone, a bracket for mounting, a power port, and a network port.

2.2.4 Wired PT Camera

This camera features an antenna, infrared and white lights, microphone, lens, power port, network port, speaker, reset button, and a Micro SD card slot.

3. Setup Guide

3.1 Download and Install the ANNKE Sight App

  1. Download and install the free "Annke Sight" app from the Google Play Store (Android) or App Store (iOS).
  2. Create an account and log in.
  3. Important: Allow the app to obtain relevant permissions (Location, Bluetooth, Storage, Notification, Microphone, Speaker, etc.) for proper device functionality.

3.2 Adding Homebase to the App

Before adding, ensure your wireless router has DHCP enabled and no restrictions on new devices. The WiFi password should be 8-20 characters, without special characters.

  1. Connect the Homebase to power and your network router using an Ethernet cable.
  2. Wait for the Homebase to start up. The network indicator light will flash, and you will hear a configuration prompt tone.
  3. Log in to the Annke Sight app. Tap the "Add smart Device" or "+" icon.
  4. Follow the on-screen prompts to complete adding the Homebase.

3.2.2 Wireless Adding Method

  1. Connect the Homebase to power. Wait for the network indicator light to flash and hear the configuration prompt tone.
  2. Log in to the Annke Sight app. Tap the "Add smart Device" or "+" icon.
  3. Follow the on-screen prompts, selecting the Wi-Fi connection method, to complete adding the Homebase.

3.3 Pairing Cameras to the Homebase

  1. Ensure the Homebase has an available channel and is powered on.
  2. Connect the new camera to a power source or turn it on (for battery cameras). Wait for the camera to emit a pairing prompt.
  3. Press and hold the "sync" (pairing) button on the Homebase for 5 seconds. The Homebase will automatically search for and pair the camera. A completion prompt will sound upon successful pairing.

Note: The Homebase can add multiple cameras simultaneously. If pairing fails, reset the camera and try again.

3.3.2 App Pairing Method

  1. Ensure the Homebase has an available channel and is powered on.
  2. Connect the new camera to a power source or turn it on (for battery cameras). Wait for the camera to emit a pairing prompt.
  3. Log in to the Annke Sight app. Tap the "+" icon in a blank channel and then "Next".
  4. Follow the app prompts. The Homebase will automatically search for and pair the camera.
  5. After successful pairing, you can "Continue to add cameras" or "Done" to exit pairing mode.

Note: If pairing fails, reset the camera and try again.

3.4 Micro SD Card Settings

  1. Disconnect the Homebase from its power source.
  2. Insert the Micro SD card into the slot on the rear of the Homebase in the correct direction.
  3. Reconnect the Homebase power supply.
  4. In the Annke Sight app, go to the device settings and then storage settings to view the Micro SD card status and format it if necessary.

3.5 Camera Installation

  1. Confirm the mounting surface can support at least three times the camera's weight and bracket.
  2. Ensure a stable WiFi signal at the camera's intended location.
  3. Choose an installation height of 2 to 3 meters from the ground.
  4. Fix the camera bracket to the desired installation position using appropriate fasteners.
  5. Mount the camera onto the bracket.

3.6 Installing and Connecting Solar Panels (Optional)

  1. Find a location that receives ample, unshaded sunlight and is within a suitable distance from the camera (consider solar panel cable length).
  2. Ensure the mounting surface can support three times the weight of the solar panel and bracket.
  3. Install the solar panel bracket and fix the solar panel to it at an angle. The ideal angle between the solar panel and the horizontal direction is 45°.
  4. Remove the waterproof rubber plug from the camera's Type-C Power Port.
  5. Plug the solar panel cable into the camera's Type-C Port.
  6. Launch the Annke Sight app to confirm the solar panel is charging the camera (a charging icon will appear).
  7. Regularly wipe the solar panel surface with a soft cloth to maintain charging efficiency.

4. Operating Instructions

Once your system is set up, you can manage and monitor it using the Annke Sight app.

4.1 Live View and Playback

  • Open the Annke Sight app and select your Homebase.
  • Tap on a camera channel to view its live feed.
  • Use the playback function to review recorded footage stored on the Micro SD card.

4.2 Human Motion Detection

The system utilizes PIR (Passive Infrared) human detection to minimize false alarms.

Human Motion Detection in action with app and email alerts
Figure 2: Human Motion Detection feature, showing a detected person and options for app push notifications and email alerts.
  • When human motion is detected, the system can send instant alerts via app push notifications or email.
  • Configure alert settings in the app's device settings.

4.3 Two-Way Audio

Communicate with visitors or deter intruders using the built-in microphone and speaker.

Two-Way Audio feature with a child speaking to the camera
Figure 3: Two-Way Audio in use, facilitating communication through the camera.
  • In the live view, tap the microphone icon to speak through the camera.
  • Listen to audio from the camera's surroundings.

4.4 Pan & Tilt Functionality (for PT Cameras)

PT cameras offer wide coverage with 350° horizontal pan and 90° vertical tilt.

Wide Coverage Pan and Tilt camera view
Figure 4: Pan and Tilt camera providing wide coverage with 350° horizontal and 90° vertical movement, eliminating blind spots.
  • Control the camera's movement directly from the Annke Sight app's live view interface.

4.5 Color Night Vision

Benefit from clear, full-color images even in low-light conditions.

  • The cameras automatically switch to color night vision when ambient light is insufficient.

4.6 One-Touch Alert

Trigger an instant alarm audio directly from the app.

One Touch Alert feature with instant alarm audio
Figure 5: One Touch Alert feature, activating an instant alarm audio to deter intruders.
  • Access this feature in the app to activate an audible alarm from the camera.

4.7 Customize Privacy Mask

Define specific areas within the camera's view to be excluded from recording for privacy.

Customize Privacy Mask feature showing masked areas
Figure 6: Customize Privacy Mask feature, allowing users to define up to 4 areas to be excluded from monitoring.
  • Up to 4 privacy mask areas can be configured via the app.

5. Maintenance

  • Cleaning Cameras: Regularly wipe the camera lenses and bodies with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners.
  • Solar Panel Cleaning: If using solar panels, regularly wipe their surface with a soft cloth to prevent dust and other coverings from reducing charging efficiency.
  • Firmware Updates: Check the Annke Sight app periodically for firmware updates for your Homebase and cameras to ensure optimal performance and security.
  • Network Stability: Ensure your home network remains stable to prevent connectivity issues with the system.

6. Troubleshooting

  • Homebase fails to add to app:
    • Check your network status.
    • Reset the Homebase and try adding it again.
    • Ensure your wireless router has DHCP enabled and no restrictions on new devices.
    • Verify your WiFi password meets the requirements (8-20 characters, no special characters).
  • Camera fails to pair with Homebase:
    • Reset the camera and try pairing again.
    • Ensure the camera is powered on and emitting a pairing prompt.
    • Make sure the Homebase has an available channel.
  • No video feed or poor quality:
    • Check camera power supply and network connection.
    • Ensure strong WiFi signal at the camera's location.
    • Restart the camera and Homebase.
  • Motion detection not working:
    • Verify PIR sensor is clean and unobstructed.
    • Check motion detection settings in the Annke Sight app.
    • Ensure privacy masks are not covering critical areas.

7. Specifications

FeatureSpecification
Brand NameANNKE
Model NumberN54WHF-I51CP
Resolution5 MP
Video Input4 Channel
TV SystemNTSC, PAL
Number of Cameras2PCS (as per kit)
OriginMainland China
Package Weight3.0 kg
Package Dimensions (L x W x H)23 cm x 22 cm x 13 cm

8. User Tips

  • Optimal Solar Charging: For best solar panel performance, ensure it's positioned to receive direct sunlight for the majority of the day, ideally at a 45-degree angle to the horizontal.
  • WiFi Signal Strength: Before final camera installation, use your smartphone to check WiFi signal strength at the intended mounting location to ensure reliable connectivity.
  • Privacy Masking: Utilize the privacy mask feature to exclude public areas or neighbor's property from recordings, respecting privacy while maintaining security.
  • Regular App Checks: Periodically check the Annke Sight app for system status, battery levels (for wireless cameras), and new alerts.

9. Warranty and Support

For technical assistance or warranty inquiries, please use the following contact information:

  • Manufacturer: Shenzhen Kean Digital co., Ltd.
  • Address: Room 1001, Rujun Building, No. 105, Zhongxing Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, 518129, China.
  • Help Center: https://help.annke.com
  • Technical Support Email: support@annke.com

For EU/UK specific support:

  • UK REP (THEMIS AR support ltd): 85 Great Portland St, London, United Kingdom, W1W 7LT, legal@themisar.com
  • EC REP (THEMIS AR Unterstützung UG): Beedstrasse 54, In Dusseldorf, (40468), Deutschland, legal@themisar.com

A user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.