MAGIC COLORM Angel Eyes LED Fog Lamp

Contents

MAGIC COLORM Angel Eyes LED Fog Lamp User Manual

Model: Angel Eyes LED Fog Lamp

Brand: MAGIC COLORM

1. Introduction

Thank you for choosing the MAGIC COLORM Angel Eyes LED Fog Lamps. These high-quality fog lamps are designed to provide superior illumination and enhance the aesthetic appeal of your vehicle. This manual provides essential information for safe installation, operation, and maintenance of your new fog lamps. Please read it thoroughly before use.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture beyond its IP67 rating.

3. Product Specifications

Attribute Value
Brand Name MAGIC COLORM
Item Type Fog Lamp Assembly
Voltage 12 V / 24 V DC
Lumens 3400LM
Main Light Color Temperature Cool White (6000K-6500K)
Angel Eye Color Options Cool White, Ice Blue, Yellow, RGB
Lamp Shell Material High-strength ABS Engineering Plastic
Waterproof Rating IP67
Light Type Fog Lamp / Floodlight Type
Certification CCC
Dimensions (approx.) 9.5 cm (3.74") Height, 13 cm (5.12") Width

Diagram showing approximate dimensions of the fog lamp: 9.5cm height and 13cm width. Figure 1: Approximate Product Dimensions

4. Product Features

  • Independent Functionality: Fog lights and Angel Eyes function independently, ensuring no interference.
  • Weather Adaptability: Designed to adapt to various harsh weather conditions including rain, fog, and snow.
  • High Durability: Compliant with IP67 international protection standards, featuring full sealing technology for dust, mud, and water resistance.
  • Enhanced Visibility: High brightness LED halo charging for daytime running lights, making your vehicle highly recognizable and creating a strong presence.
  • Robust Construction: Features a durable PC lens and high-strength ABS engineering plastic housing.

Close-up view of the fog lamp highlighting its PC Lens, Bright Light, and ABS Housing. Figure 2: Product Details - PC Lens, Bright Light, ABS Housing

Image demonstrating the fog lamp's waterproof capabilities in various weather conditions like rain, fog, snow, and dust. Figure 3: Waterproof Design for All Weather Conditions

5. Fitment Guide

These fog lamps are designed for universal fitment for vehicles that can accommodate a 4-inch fog light. Specific compatible models include:

  • Jeep Wrangler JK 2 Door (2007-2015)
  • Jeep Wrangler Unlimited JK 4 Door (2007-2015)
  • Jeep Grand Cherokee (2011-2013)
  • Dodge Journey (2009-2013)
  • Dodge Magnum (2005-2008)
  • Dodge Charger (2011-2013)
  • Chrysler 300 (2005-2010) - Touring or Limited models only
  • Chrysler PT Cruiser (2006-2010)

6. Installation Instructions

Step 1: Preparation Work (Safety First)

  1. Vehicle Positioning: Park the car steadily on a level surface and engage the handbrake.
  2. Power Disconnection: Disconnect the negative cable of the vehicle's battery to prevent electrical hazards.
  3. Access Old Light: Open the tailgate (if applicable), locate and remove the tail light repair cover from the inside of the vehicle.
  4. Remove Old Light: Disconnect the electrical plug from the old light, unscrew any fixing nuts, and carefully pull out the old lamp from the outside to the inside.

Step 2: Install the New Light (Test First, Then Fix)

  1. Pre-testing: Before fully mounting, connect the new light's plug to the original car harness. Reconnect the battery, turn on the vehicle's power, and test all lighting functions (brake lights, turn signals, reverse lights, and driving lights) to ensure they illuminate normally.
  2. Wiring Diagram: The fog lamp features a simple plug-and-play connection. Connect the black wire to the NEGATIVE terminal and the red wire to the ACC/Positive terminal of your vehicle's electrical system.

    Wiring diagram showing black wire connecting to negative and red wire connecting to ACC/positive for easy installation. Figure 4: Easy Installation Wiring Diagram

  3. Formal Fixing: After confirming normal function, disconnect the battery again. Align the new light with its designated position and install it. Tighten all fixing nuts from the inside. Finally, securely connect the electrical plug and replace the maintenance cover.

Step 3: Final Inspection

  1. Function Review: Reconnect the battery and perform a final check of all lighting functions.
  2. Sealing Inspection: After washing the car or pouring water over the installed lights, check for any severe water ingress or fogging inside the lamp. Slight fogging is normal and should clear up and dry out on its own.

Before and after installation comparison of the fog lamps on a Jeep Wrangler. Figure 5: Installation Effect on a Vehicle

7. Operating Instructions

The MAGIC COLORM Angel Eyes LED Fog Lamps offer distinct lighting modes:

  • Fog Lamp Mode: Provides a bright, focused beam for improved visibility in adverse weather conditions.
  • Angel Eyes Mode: The outer halo ring illuminates, serving as a distinctive daytime running light (DRL) or accent light.
  • Combined Mode: Both the fog lamp and Angel Eyes can operate simultaneously for maximum illumination and visual impact.

The specific activation of these modes depends on your vehicle's wiring and switch configuration. Refer to your vehicle's owner's manual for details on operating fog lights and DRLs.

Image showing the white lighting effects: Fog Lamp + Angel Eyes, Fog Lamp only, and Angel Eyes only. Figure 6: White Lighting Effects (Fog Lamp & Angel Eyes)

Image showing the blue lighting effects: Fog Lamp + Angel Eyes, Fog Lamp only, and Angel Eyes only. Figure 7: Blue Lighting Effects (Fog Lamp & Angel Eyes)

Image showing the yellow lighting effect: Fog Lamp only. Figure 8: Yellow Lighting Effect (Fog Lamp)

Video 1: Demonstration of the fog lamp's lighting effects and features.

8. Maintenance

  • Regular Cleaning: Clean the lamp lenses regularly with a soft cloth and mild soap solution to ensure optimal light output. Avoid abrasive cleaners.
  • Wiring Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure all connections remain secure.
  • Water Ingress Check: After heavy rain or car washes, visually inspect the lamps for any signs of water accumulation inside the housing. While designed to be waterproof (IP67), extreme conditions or improper installation can sometimes lead to issues.
  • Damage Assessment: If the lamp housing or lens appears cracked or damaged, replace the unit to maintain performance and safety.

9. Troubleshooting

  • Lights Not Turning On:
    • Check all wiring connections to ensure they are secure and correctly connected (Black to Negative, Red to ACC/Positive).
    • Verify that the vehicle's battery is properly connected and charged.
    • Check the fuse associated with the fog lights in your vehicle's fuse box.
  • Intermittent Operation:
    • Inspect wiring for loose connections or damaged insulation.
    • Ensure the switch controlling the fog lights is functioning correctly.
  • Water or Fog Inside Lamp:
    • Slight fogging that clears up and dries normally is acceptable due to temperature changes.
    • If severe water ingress or persistent fogging occurs, re-check the installation for proper sealing and ensure all nuts are tightened. If the issue persists, the seal may be compromised.

10. User Tips

  • Pre-Installation Test: Always perform a functional test of the lights before fully securing them into the bumper. This saves time if adjustments or troubleshooting are needed.
  • Secure Wiring: Use zip ties or electrical tape to secure any loose wiring to prevent chafing or accidental disconnection during vehicle operation.
  • Professional Installation: If you are unsure about any step of the installation process, it is recommended to seek assistance from a qualified automotive technician.

11. Warranty & Support

For detailed warranty information and customer support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download or viewing:

View User Manual (PDF)

Manufacturer: Guangzhou Camel Technology Co., Ltd.

EU Authorized Representative: MJCM SAR

Contact information can be found within the linked PDF document.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.