SOLAKAKA E9 Pro

Contents

SOLAKAKA E9 Pro MMO Vertical Mouse User Manual

Model: E9 Pro | Brand: SOLAKAKA

Introduction

The SOLAKAKA E9 Pro is an innovative ergonomic vertical mouse designed for both MMO gaming and all-day work. It combines a revolutionary ergonomic grip with precise control and rapid responsiveness, featuring a high-performance PAW3395 sensor, a 1000mAh battery, and tri-mode connectivity (Bluetooth, 2.4GHz Wireless, Type-C Wired). This manual provides detailed instructions for setup, operation, customization, and troubleshooting to ensure you get the most out of your E9 Pro mouse.

SOLAKAKA E9 Pro banner highlighting 10 programmable side buttons, 1000mAh battery, RGB lighting, 45 degree ergonomic design, tri-mode connection, and PAW3395 sensor.

SOLAKAKA E9 Pro: The first ergonomic vertical mouse built for gaming and all-day work.

What's in the Box

Please check the contents of your package:

  • 1 x SOLAKAKA E9 Pro Mouse
  • 1 x USB-C Charging Cable
  • 1 x User Manual (this document)
  • 1 x 2.4GHz Receiver
Contents of the SOLAKAKA E9 Pro box, showing the mouse, USB-C cable, user manual, and 2.4GHz receiver.

Setup Guide

First-time Use Instructions

  1. Fully charge the mouse with the included USB-C charging cable.
  2. Remove the protective film from the anti-slip pad on the bottom of the mouse.
  3. The mouse customization software is only compatible with Windows.

Driver Setup

To unlock the full customization potential of your E9 Pro mouse, you need to install the driver software. Please note that the downloadable driver is currently not supported on macOS.

  1. Visit solakakadriver.com to download the appropriate driver for your E9 Pro mouse.
  2. Follow the on-screen instructions to install the driver.
  3. Once installed, open the software to start customizing your mouse settings.

Alternatively, an online web driver is available for quick access. Press and hold the DPI button for 3 to 5 seconds to automatically display the webpage for the online driver.

Video: Quick guide on how to use the SOLAKAKA E9 PRO mouse, including driver setup, button customization, macro function, performance settings, RGB lighting, and connection modes.

Connection Modes

The E9 Pro supports tri-mode connectivity: Bluetooth (BT), 2.4GHz Wireless, and Type-C Wired. Use the switch at the bottom of the mouse to change between modes.

  • 2.4GHz Wireless Connection:
    1. Switch the power to '2.4G' at the bottom of the mouse.
    2. Remove the 2.4GHz receiver from its storage slot and plug it into your device's USB port. The mouse should connect automatically.
  • Bluetooth (BT) Mode Connection:
    1. Switch the power to 'BT' at the bottom of the mouse.
    2. Press and hold the mode switch button until the indicator flashes rapidly (pairing mode).
    3. Open Bluetooth settings on your device, select "E9PRO BT1" (green light) or "E9PRO BT2" (blue light), and tap Connect.
  • Type-C Wired Connection: Simply connect the mouse to your device using the provided USB-C cable.

Operating Instructions

Button Layout

The E9 Pro features a comprehensive button layout for enhanced control and customization:

Diagram showing the button layout of the SOLAKAKA E9 Pro mouse, labeling Low Voltage/Charging Indicator, Forward, Backward, Return to Desktop, Logo Light/DPI Indicator, Left Button, Scroll Wheel/Middle Button, Right Button, DPI+, DPI-, and Mode Switch Button.
  • Left Button
  • Right Button
  • Scroll Wheel / Middle Button
  • DPI+ Button
  • DPI- Button
  • Mode Switch Button
  • Low Voltage / Charging Indicator
  • Forward Button
  • Backward Button
  • Return to Desktop Button
  • Logo Light / DPI Indicator

Button Customization

You can assign different functions to each button using the driver software. This allows for personalized control whether for daily use or complex MMO games.

Macro Function

The software allows you to record both keyboard and mouse actions and assign them to a single button. By fine-tuning your macros, you can execute complex combos or simplify repetitive tasks. With onboard memory, your settings are saved and always ready, even when switching devices.

Performance Settings (DPI & Polling Rate)

Adjust the DPI (Dots Per Inch) and polling rate to match different scenarios, from precision in FPS games to efficiency in daily tasks. The E9 Pro supports up to 36,000 DPI, ensuring you'll always find your ideal setting.

  • DPI Switching: Press the DPI+ or DPI- buttons to adjust DPI. You can also adjust DPI via the software driver. (Factory default: 1200 DPI, driver supports up to 36000 DPI).
  • Polling Rate Switching: Press and hold the Scroll Wheel and Right Button simultaneously for 3 seconds to switch polling rates.

RGB Lighting

Customize RGB lighting effects through the software or web driver to match your setup and create your own desk aesthetic.

  • Lighting Adjustment: Press the Backward button and DPI- button at the same time to cycle through lighting effects. Further customization is available via the software.

Product Specifications

ParameterDetails
ModelE9 Pro
MaterialPlastic
Battery Capacity1000 mAh
Mouse Size (L x W x H)132.0 x 89.0 x 73.0 mm
Mouse Weight97g (excluding receiver)
Lighting TypeRGB
Connection ModesType-C Wired / 2.4GHz Wireless / Bluetooth
Compatible SystemsWindows / Mac / Linux
Compatible DevicesPC / Laptop / Tablet
Sensor ModelPixart 3395
Acceleration50 G
DPI Settings800/1200/1600/2400/3200/6400 (Adjustable via software from 1000 DPI to 36000 DPI)
Tracking Speed (IPS)650 IPS
Polling Rate1000Hz/2000Hz/4000Hz/8000Hz (BT mode only supports 250Hz)
Left/Right Button Lifespan80,000,000 clicks
Middle Button Lifespan10,000,000 clicks
Comparison table between E9 and E9 Pro mouse models, detailing color, sensor, polling rate, DPI, ACC, IPS, onboard memory, battery, and weight.

Maintenance & Charging

Intelligent Power Saving

The E9 Pro features an intelligent power-saving design to extend battery life. The default energy-saving mode automatically turns off RGB lighting when the mouse is moved. You can enable an "Always On" mode via the software for constant lighting, but this increases power consumption. When the battery is low, it is recommended to switch to wired mode to avoid input delay.

Charging Indicator

Light Color/StateIndication
Slow flashing redCharging
Solid greenFully charged
Rapid flashing redLow battery alert, please charge

Sleep Modes

  • Sleep Mode (Lights Off): After 1 minute of inactivity.
  • Standby Mode: After 3 minutes of inactivity.
  • Deep Sleep Mode: After 20 minutes of inactivity.

Troubleshooting

  • Mouse Pointer Not Moving:
    • Ensure the 2.4GHz receiver is not blocked by metal surfaces. Try using a USB 2.0 extension cable.
    • Reinsert the receiver firmly.
    • Charge the mouse and check if the red indicator lights up.
  • BT Connection Fails:
    • Make sure your system supports Bluetooth 5.0 or above.
    • Remove any existing E9 Pro Mouse entries from your Bluetooth list and pair again.
    • Restart Bluetooth on your device.
  • Unstable Cursor:
    • Switch to a dark-colored mouse pad.
    • Disable Straight Line Correction in the driver.
    • Check if DPI or Polling Rate are set too high.
    • Charge the mouse if the battery is low.
  • Software displays “Device not connected”:
    • Switch to 2.4 GHz wireless or wired mode (Bluetooth does not support advanced configuration).
    • Grant browser permissions – the web driver requires access to HID devices (accept the pop-up in Chrome/Edge).
    • Close other mouse software (e.g., Logitech G HUB, Razer Synapse) to avoid conflicts.
    • Unplug and re-plug the USB receiver, then refresh the page.
  • Settings don't work or high latency over Bluetooth:
    • Protocol limitation: Bluetooth only supports basic functions. Configure complex macros in 2.4G/wired mode first, then switch back to Bluetooth.
    • Reduce latency: Stay within 1 meter of your computer and away from Wi-Fi routers or other 2.4GHz interference.
  • How to restore factory settings:
    • Via Software: In the driver software, navigate to “Restore Factory Defaults” and then “Save to device”.
    • Via Hardware: Press and hold the Scroll Wheel and Mode Switch Button for 3 seconds. Alternatively, press and hold the DPI+ and Mode buttons for 5 seconds while plugging in the USB cable.
  • Can the E9 Pro be used on a Mac?
    Yes. The E9 Pro is plug-and-play on Mac with all basic functions (click, scroll, side buttons). However, button customization requires Windows software for the initial setup. Once configured, settings are saved to the mouse’s onboard memory and remain fully functional on Mac without any additional software.
  • How to configure side buttons if you only have a Mac?
    You will need to borrow a Windows PC temporarily to configure the mouse. Settings are permanently saved to the mouse's onboard memory and will work across all devices, including Mac, once configured.

User Tips

  • The mouse is very lightweight, which can be surprising initially.
  • The ergonomic design is comfortable for extended use, but users with smaller hands might find some side buttons difficult to reach.
  • Consider using 3D mouse grips if you have larger hands and prefer a firmer grip.
  • The included USB cable is noted for being soft and light.
  • The standby sleep feature is very efficient, contributing to long battery life.
  • While the software offers full customization, some users find its interface to be less modern.
  • For Linux users, a web-based configurator is available, but sometimes requires switching the USB device's operating mode.

Frequently Asked Questions

Q: Can it store complex macros on the keys? Macros consisting of more than 25 characters?
A: Yes, the E9 Pro supports complex macros. You can record both keyboard and mouse actions and assign them to a single button. The onboard memory saves these settings, making them available across different devices.

Warranty & Support

For any issues with installing or using software drivers, or for further assistance, please contact our after-sales service. More innovative and ergonomic products from SOLAKAKA are on the way, so stay tuned!

Factory Reset: Press and hold the Scroll Wheel and Mode Switch Button for 3 seconds, or reset through the driver software.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.