Tuya X5

Contents

Tuya Zigbee Wired Gateway X5 User Manual

1. Introduction

The Tuya Zigbee Wired Gateway X5 is a multi-mode smart home control center designed to facilitate the interconnection of intelligent devices such as Zigbee and Bluetooth Mesh devices. This gateway allows for the creation of flexible and diverse smart home systems, enabling remote control of devices via a mobile phone and automation of various scenarios. Examples include automatically turning on lights upon entry, switching off appliances when leaving home, and detecting and alerting users to abnormal events. This product is intended for indoor use only.

2. Product Overview

The X5 Gateway features a compact design with essential ports for connectivity and functionality.

Tuya Zigbee Wired Gateway X5 with dimensions
Figure 1: Tuya Zigbee Wired Gateway X5 with dimensions (approx. 19.15cm x 11.2cm x 3cm, antenna height 17.7cm)
Close-up of X5 Gateway ports
Figure 2: Close-up view of the X5 Gateway's rear ports.

2.1. Components and Interfaces

  • Reset Button: Long press to restore factory settings.
  • Network Port (RJ45): For inserting a network cable to establish a wired internet connection.
  • Upgrade Interface: Used for debugging the device and upgrading its software.
  • Third-party Sub-device Access: Provides functionality for connecting third-party sub-devices (requires dedicated modules).
  • Power Interface (DC IN): Insert the power adapter here to supply power to the product.

3. Setup Guide

3.1. Connecting to the Tuya Smart Life App

This product integrates with the Smart Life app, allowing you to control smart devices and enable interoperability with other products. Follow these steps to set up your gateway:

  1. Download the Smart Life App: Scan the QR code below or search for "Smart Life" in your app store to download and install the application.
  2. QR code for Smart Life App download
    Figure 3: Scan to download the Smart Life App.
  3. Initial Connection Prerequisites:
    • Ensure your mobile phone is connected to a 2.4GHz Wi-Fi network.
    • For a smooth connection, keep your mobile phone close to the gateway.
    • Verify that both your mobile phone and the gateway are on the same Wi-Fi network.
  4. Add Device in App:
    • Open the Smart Life App.
    • Tap the "+" icon in the upper right corner to enter the "Add Device" page.
    • Select "Gateway Central Control".
    • Choose "Wired Gateway".
    • Follow the on-screen prompts within the app to complete the device addition process.

Note: Due to ongoing updates to the Smart Life App, the actual operation steps might vary slightly from this description. Always refer to the latest instructions provided within the Smart Life App.

3.2. App Setup Demonstration Video

Video 1: Demonstration of connecting the X5 Gateway to the Smart Life app.

4. Operating Instructions

Once the X5 Gateway is successfully connected to the Smart Life app, you can begin to add and manage your smart devices. The gateway acts as a central hub, allowing you to control various Zigbee and Bluetooth Mesh devices from a single interface.

4.1. Device Management and Automation

  • Adding Devices: Use the Smart Life app to discover and add compatible Zigbee and Bluetooth Mesh devices to your gateway.
  • Remote Control: Control your connected smart devices from anywhere using your mobile phone.
  • Scene Automation: Create custom automation scenarios (e.g., turn on lights when a motion sensor is triggered, adjust thermostat based on time of day).
  • Voice Assistant Integration: The X5 Gateway supports integration with popular voice assistants for hands-free control.
Diagram showing X5 Gateway controlling over 400 devices
Figure 4: The X5 Gateway can stably control over 400 devices (200+ Bluetooth Mesh, 200+ Zigbee).
X5 Gateway supporting Alexa and Google Assistant
Figure 5: The X5 Gateway supports integration with Amazon Alexa and Google Assistant.

5. Indicator Light Description

The X5 Gateway has two indicator lights: a network status indicator and a set-up net indicator. Their different states convey specific information about the device's status.

Indicator Type Light State Status
Network Status Indicator Light Lights out The network is disconnected.
Long bright Waiting for device to connect.
Flickering Data transmission.
Set-up Net Indicator Light Lights out Active.
Long bright Inactive.
Flickering The device is active, but there is no network.

6. Maintenance

  • Cleaning: Regularly wipe the device with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
  • Environment: Ensure the gateway is placed in a dry, well-ventilated area, away from direct sunlight, extreme temperatures, and high humidity.
  • Software Updates: Keep the Smart Life app and gateway firmware updated to ensure optimal performance and security. Check the app regularly for available updates.

7. Troubleshooting

  • Gateway Not Connecting to Network: Check the network status indicator light (refer to Section 5). Ensure the Ethernet cable is securely connected and your router is functioning correctly.
  • Devices Not Connecting: Ensure the gateway's set-up net indicator light is in the correct state for adding devices. Verify that the devices are compatible with Zigbee or Bluetooth Mesh standards and are within the gateway's transmission range (up to 1000sqm).
  • App Issues: If the Smart Life app is not responding or devices are not appearing, try restarting the app or your mobile device. Ensure your app is updated to the latest version.
  • Factory Reset: If persistent issues occur, you can perform a factory reset by long-pressing the reset button. Note that this will erase all settings and connected devices, requiring re-setup.
  • Fault Replacement Function: If the gateway itself is broken, a new gateway can inherit the original device settings. Log in to your Smart Life account, click on the device in the app, and follow the instructions to replace the cloud content, which will be automatically delivered to the new gateway.
Diagram illustrating fault replacement function for the gateway
Figure 6: Illustration of the fault replacement function, allowing settings to be transferred to a new gateway.

8. Specifications

Feature Detail
Model Number X5
Origin Mainland China
Certification CE, RoHS
Ethernet Port RJ45
Transmission Distance Up to 1000sqm
Material PC and ABS
Gateway Type 3 in 1 (Super Strong Multiple Gateway)
Bluetooth Standard Bluetooth 5.0
Package Length 24 cm
Package Width 15 cm
Package Height 7 cm
Package Weight 0.65 kg

8.1. Hazardous Substances Table

This table is prepared in accordance with SJ/T 11364 regulations.

Part Name Harmful Substances
Lead (PB) Mercury (HG) Cadmium (CD) Hexavalent Chromium (CR (VI)) Polybrominated Biphenyls (PBB) Polybrominated Diphenyl Ethers (PBDE)
Plastic Parts O O O O O O
Metal Parts O O O O O O
Electronic Components O O O O O O
Accessories X O O O O O

O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.
X: Indicates that the hazardous substance exceeds the limit requirements specified in GB/T26572 in at least one homogeneous material of the part.

9. User Tips

  • Optimal Placement: Position the gateway centrally within your home to maximize coverage for all connected devices.
  • Wired Connection Preference: For the most stable and reliable performance, always use a wired Ethernet connection for the gateway.
  • Regular App Checks: Periodically open the Smart Life app to check the status of your devices and ensure all automations are running as expected.
  • Power Cycle for Minor Issues: If a device becomes unresponsive, try power cycling the individual device or the gateway itself before attempting a full reset.

10. Warranty and Support

The after-sales service for the Tuya Zigbee Wired Gateway X5 strictly adheres to the "Consumer Rights and Interests Protection Law of the People's Republic of China" and the "Product Quality Law of the People's Republic of China". The service includes a "Three Guarantees" policy, detailed as follows:

10.1. Warranty Policy

During the validity period of the Three Guarantees, you are entitled to free return, exchange, and maintenance services as per these regulations. All return, exchange, and maintenance requests must be processed with a valid invoice.

  • 7-Day No-Reason Return: For purchases made through e-commerce channels, you may return the product within 7 days from the day after receipt without reason. The user is responsible for logistics costs.
  • Product Performance Failure: If the product exhibits performance failures listed in the Product Performance Fault Table, free services will be provided after testing and confirmation by an authorized after-sales service center.

10.2. Service Policy Overview

Service Type Service Policy
Return of Goods Return for quality reasons within 7 days from the day after receipt.
Exchange Exchange for quality reasons within 15 days from the day after receipt.
Maintenance Free maintenance for quality reasons for 1 year from the day after signing.

For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.