1. Product Overview
The EZAIOT WiFi Gas Boiler Thermostat is designed for precise room temperature control in both heating and cooling systems. This smart thermostat offers remote control via smartphone applications (Smart Life/Tuya Smart) and voice control through Amazon Alexa, Google Home, and Yandex Alice. It features simple button operation, a clear display, and supports up to 6 programmable periods per day. Powered by 4 x AA (1.5V) alkaline batteries, it ensures easy installation and reliable performance.
Key Features:
- Wireless, Battery Powered (4x AA)
- Heating and Cooling Control
- Daily Programming (up to 6 events)
- 0.1°C Temperature Hysteresis
- Wi-Fi Connectivity (2.4 GHz)
- App Control (Smart Life, Tuya Smart)
- Voice Control (Alexa, Google Home, Yandex Alice)
- Dry Contact Signal Boiler Heating Application

Important Notice
Please keep this product away from the reach of children to avoid any possible danger.
2. Standard Accessories
The product package includes the following items:
- 1 x Thermostat Unit
- 1 x Product Manual (This document, also available as PDF: User Manual PDF)
- 1 x Screw Bag for Installation
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | EZAIOT |
| Model Number | Cooling Heating Boiler Thermostat |
| Power Supply | 4 x LR6/AA (1.5V) Alkaline Batteries (Not included) |
| Load Rating | 30 VDC Max. 2 A (Resistive Load) |
| Temperature Limit (Upper) | 95°C |
| Temperature Setting Range | 5-50°C |
| Temperature Increment | 0.1°C / 0.3°C |
| Switching Differential (Hysteresis) | Range: 0.1-10°C (Default: 0.5°C) |
| Operating Environment | -5-50°C |
| Wi-Fi | 2.4 GHz (802.11b/g/n compatible) |
| Wi-Fi Range (Indoors) | 35 m (varies by environment) |
| Enclosure Material | Flame-retardant PC+ABS |
| Protection Level | IP20 |
| Dimensions (WxHxD) | 120 mm x 86 mm x 24.2 mm |
| Certification | CE |
| Origin | Mainland China |
4. Display Interface and Buttons
The thermostat features a clear digital display and intuitive buttons for easy control.
Display Indicators:
- Wi-Fi Status Indicator: On (Connected), Off (Not Connected), Flashing (Ready to Connect)
- Week Day: (Mon-Sun)
- Event Icons: Wake up (Event 1), Leave (am) (Event 2), Return (am) (Event 3), Leave (pm) (Event 4), Return (pm) (Event 5), Sleep (Event 6)
- Mode Icons: Auto Mode, Manual Mode, Temporary Override Mode
- Heating/Cooling Icons: Heating Mode, Cooling Mode
- Setpoint Temperature
- Low Battery State
- Frost Protection
- Child Lock
- Heating State Active
- Cooling Status
Buttons:
- Up Button (▲): Increase temperature, navigate menus.
- Down Button (▼): Decrease temperature, navigate menus.
- Mode Button (M): Switch modes (Manual/Auto), enter settings.
- Power Button (⏻): Turn device On/Off.
Temperature Setting Step: The device supports fine-tuning of the target temperature with two adjustment modes:
- Short press: Adjusts the temperature in 0.1 °C increments.
- Long press: Adjusts the temperature in 0.3 °C increments.

5. Setup and Installation
Installation Instructions
WARNING: Risk of Electric Shock
- Before installing the device, turn the circuit breakers off. Use a suitable test device to make sure there is no voltage on the wires you want to connect. When you are sure that there is no voltage, proceed with the installation.
- If you are unsure how to connect the wires, consult a qualified electrician.
- Incorrect wiring can cause electric shock, fire, or damage to the device.
- Ensure that any unused live or neutral wires inside the wall box are properly insulated with electrical tape or an approved wire connector.
- Exposed conductors may lead to short circuits or other electrical hazards.
- Insert a screwdriver into the slot at the bottom of the thermostat and gently pry the base upward from the faceplate.
- Gently pry open the small cover on the base to access the wiring compartment. Lift the cover to reveal the wiring terminals marked NC/NO/COM.
- Carefully pull the two control wires from your boiler through the central opening of the base. Align the mounting holes on the base with the wall box and use two screws to secure it firmly to the wall.
- This thermostat uses dry contact output (no-voltage contact). Use a flat-head screwdriver to loosen the screws on the terminal block, then connect the wires to either COM + NO or COM + NC depending on the type of external device:
- COM + NO: for normally open (NO) devices.
- COM + NC: for normally closed (NC) devices.
- After wiring, tighten the screws securely to ensure a proper connection.
- After wiring and securing the base, place the small cover back onto the wiring compartment. Press it gently until it clicks into place.
- Insert 4 LR6/AA (1.5V) alkaline batteries, making sure to match the (+) and (-) symbols in the battery compartment.
- Confirm the position of the device buckle.
- Align the thermostat with the base and press it down until it clicks into place.


Device Connection (App Pairing)
To utilize smart features, connect your thermostat to the Smart Life app.
- Step 1: Download the Smart Life App
Scan the QR code provided in the original manual or search for