1. Introduction
Thank you for choosing KINGSOFE V40 LED Headlight Bulbs. These high-performance bulbs are designed to provide superior illumination for your vehicle, featuring advanced CSP chips, efficient cooling, and a durable, waterproof design. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED headlights.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock.
- Wear appropriate safety gear, including gloves and eye protection, during installation.
- Ensure the bulbs are securely installed to prevent vibration damage or dislodgement.
- Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
- Changes or modifications not expressly approved by the manufacturer could void your authority to operate the equipment.
- This equipment complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
3. Package Contents
- 2 x KINGSOFE V40 LED Car Headlight Bulbs (H1, H4, H7, H11, 9005, or 9006, depending on selection)
Please verify the model of your car lights before installation to ensure compatibility.
4. Specifications
| Feature | Specification |
|---|---|
| Wattage | 300W |
| Lumens | 80000LM |
| Fit Plugs | H1, H4, H7, H11, 9005 (HB3), 9006 (HB4) |
| Light Source | LED 6000K Cold White (3570 CSP CHIP, Double-sided 12 Chips) |
| Operating Voltage | DC 12-24V |
| Rated Current | 1.5A-10A |
| Operating Temperature | -40℃ ~ +70℃ (up to +135℃ in PDF) |
| Life Span | Above 30,000 hours (up to >50,000 hours in PDF) |
| Waterproof Rating | IP68 |
| Material | Aviation Aluminum |
| Cooling System | Seven-blade dual ball bearing high-speed silent cooling fan (12000RPM) |
| Certification | E-Mark, CE, FCC, RoHS |
| Features | Super CANBUS, 1:1 Mini Size Design, Plug and Play, 360° Rotating Snap Dimmer |
For detailed specifications and compliance information, please refer to the official user manual PDF.
5. Setup and Installation
The KINGSOFE V40 LED Headlight Bulbs are designed for non-destructive, plug-and-play installation, mimicking the original halogen lamp's 1:1 design for consistent light source points and snap position.
- Verify Compatibility: Before starting, ensure the selected bulb type (H1, H4, H7, H11, 9005, 9006) matches your vehicle's headlight socket.
- Access Headlight Assembly: Open your vehicle's hood and locate the headlight assembly. You may need to remove covers or other components to access the existing bulb.
- Remove Old Bulb: Carefully disconnect the wiring harness from the old halogen bulb. Then, unclip or twist to remove the old bulb from its housing.
- Install LED Bulb: Insert the KINGSOFE V40 LED bulb into the headlight housing. Ensure it is seated correctly and securely.
- Adjust Beam Pattern (if necessary): The bulb features a 360° rotating snap dimmer. If the light pattern is not ideal, you can rotate the bulb's clip to adjust the beam for a perfect cut-off line without needing specialized tools or a visit to a service center.
- Connect Wiring: Connect the LED bulb's wiring harness to your vehicle's electrical connector.
- Test Lights: Turn on your vehicle's headlights to test the new LED bulbs. Check both low and high beams.
- Secure Components: Reinstall any covers or components removed during step 2.
6. Operating Instructions
Once installed, the KINGSOFE V40 LED Headlight Bulbs operate like standard vehicle headlights. They provide a 6000K cold white light for enhanced visibility.
- Low Beam: Provides clear paving for regular driving conditions.
- High Beam: Offers an extra-long range for maximum visibility when needed.
7. Maintenance
The KINGSOFE V40 LED Headlight Bulbs are designed for long-term, maintenance-free operation. However, to ensure optimal performance and longevity:
- Cleaning: Periodically clean the exterior of your headlight lenses with a soft cloth and mild automotive cleaner to remove dirt and debris that may obstruct light output.
- Inspection: Occasionally inspect the wiring connections to ensure they remain secure and free from corrosion.
- Cooling System: The bulbs feature a high-speed silent cooling fan. Ensure the area around the fan is not obstructed to allow for proper heat dissipation.
8. Troubleshooting
- Flickering/Interference/Error Light: If you experience flickering, interference, or an error light on your dashboard after installation, your vehicle's CANBUS system may require a resistor canceller decoder. These bulbs feature Super CANBUS decoding for 99% of vehicles, but some sensitive systems may still require an additional decoder.
- No Light Output:
- Check all electrical connections to ensure they are secure.
- Verify that the bulb is correctly seated in the housing.
- Ensure the vehicle's fuses related to the headlights are intact.
- Radio Interference: If the equipment causes harmful interference to radio or television reception, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
9. User Tips
- For optimal beam pattern, take the time to adjust the 360° rotating snap dimmer during installation. This can significantly improve visibility and prevent glare for oncoming traffic.
- Consider testing the headlights in a dark, flat area after installation to ensure proper alignment and light distribution.
- If you are unsure about the installation process, it is recommended to seek professional assistance.
10. Warranty and Support
KINGSOFE V40 LED Headlight Bulbs come with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For further assistance, detailed diagrams, or additional information, you may refer to the comprehensive user manual available in PDF format: View User Manual (PDF).
The product is certified with E-Mark, CE, FCC, and RoHS, ensuring compliance with international quality and safety standards.