Professional 22D MAX 2-in-1 Face & Body Lifting Machine User Manual

1. Introduction

The MYOSLIM 22D MAX is a professional 2-in-1 face and body lifting machine designed for skin tightening, fat reduction, and overall body shaping. Utilizing advanced ultrasound wave technology, this device offers both delicate facial anti-aging and V-face slimming, as well as firming, fat dissolving, and body management capabilities. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your 22D MAX machine.

Figure 1: The 22D MAX machine with its intuitive touchscreen interface.

2. Safety Precautions and Operational Taboos

2.1. Operational Taboos

To ensure user safety and optimal results, the following conditions prohibit the use of the 22D MAX machine:

• Pregnant women and individuals during lactation.
• People with irregular heart and heartbeat, especially those with cardiac pacemakers.
• Cancer patients, major surgery patients, and diabetes patients.
• People with epilepsy or severe hypertension.
• Individuals with severe allergies or severe facial acne (temporary prohibition).
• Individuals who have undergone facial surgery (prohibited).
• Areas of skin with open wounds.
• Individuals with metal implants in the body (exercise caution and avoid metal parts).
• Individuals with gold implants in the face.
• Individuals who have undergone plastic surgery or have artificial fillers in the body.
• Patients with severe cystic acne on the face and neck (exercise caution).
• Individuals with serious infectious skin diseases (exercise caution).
• Individuals who have taken isotretinoin (Accutane/Roaccutane/Oratane) within the last 9 months.

2.2. General Safety Precautions

• Ensure the power plug is clean and free of foreign matter before connecting to the socket.
• Connect the device to a 110-220V, 50Hz-60Hz power outlet. Unplug the power cord when moving the device.
• Do not touch the power plug or pull the power cord with wet hands.
• Do not force the area around the instrument or power supply.
• Avoid using the instrument in high temperatures or near heating equipment.
• Do not disassemble the power socket after the instrument is started.
• If smoke or odor is detected during use, immediately unplug the power supply and contact after-sales service.
• Do not touch your lips or eyes when the handle is activated to prevent injury.
• If the indicator is always bright blue or an abnormal sound is heard during operation, immediately remove the handle from the skin surface.

Figure 2: The 13D handle in operation, showing light emission.

3. Instrument Installation

3.1. Components

The 22D MAX instrument consists of a main machine and two types of handles: a 13D Multi-dimensional handle and an 18D RS Thermoplastic handle. The touch screen is integrated into the main machine.

3.2. Handle Connection

Before installing the rear cover, refer to the rear cover diagram for jack and direction. Connect the handles and foot pedal as follows:

• 13D Connection Jack: The grey plug corresponds to the grey interface on the instrument.
• 18D Connection Jack: The purple plug corresponds to the purple port on the instrument.
• Foot Pedal Connection Socket: The gold plug corresponds to the gold connector on the instrument.

Figure 3: Rear view of the 22D MAX machine with labeled connection ports.

4. Operating Instructions

4.1. Precautions Before Operation

• Consult experts or receive professional training before using the device.
• Assess the customer's skin condition and check for allergies (do not operate on severe allergies).
• Inquire about recent injections (water light instrument can be used after two days, HIFU type after one month, face injection after three months).
• Inform the customer about potential sensations or reactions during operation to ensure they are psychologically prepared.
• Advise the customer not to take medication or drink alcohol for 24 hours before and after operation.
• Adjust the parameters of the beauty head appropriately before starting.
• Verify the instrument is in normal working condition and all preparations are complete.

Figure 4: Illustration of skin layers and recommended treatment depths for facial applications.

4.2. Precautions After Operation

• Do not use hot water to wash the treated area for one week. Cold water is recommended; warm water (no more than 35 degrees) can be used in winter.
• Apply a moisturizing repair mask every morning and night for one month, focusing on moisturizing, hydrating, and sun protection.
• Avoid thermal energy, color light, and laser beauty equipment care for one week.
• Do not use sauna, facial massage, heavy makeup, or expose to high temperatures/sun for two weeks.
• Avoid injections, wire burying, or fillers for one month.
• Avoid heavily pigmented foods (e.g., soy sauce), alcohol, smoking, hot pepper, seafood, and hard foods (e.g., sugar cane, betel nut). Do not take antibiotics like aspirin.
• Minimize water intake after 8 p.m. to reduce potential edema.
• Ensure adequate rest and sleep after operation, avoiding strenuous exercise.
• Follow a good post-operation repair, nutrition, and water supplement regimen to maximize and prolong results.
• Temporary redness, rash, or dark spots may occur in individuals with poor metabolism or those who have previously received fillers/injections/freckle treatments. These are normal and typically subside within 3-7 days, or up to a week.
• Mild acid swelling may be felt in treated areas for up to a month; this is normal.
• Adhering to these guidelines is crucial for achieving the best long-term results.

4.3. Operation Precautions

• Read the instruction manual carefully before use.
• Start with lower strength and gradually adjust to an appropriate level.
• Maintain close contact between the handle and skin during operation to avoid discomfort.
• The handle must remain on the skin surface while the work indicator is on; only remove after pausing or ending.
• If the handle malfunctions, remove it from the skin immediately to prevent damage.
• Do not wrap the handle cable around your hand during operation.
• When changing the head, ensure the socket on the head is installed against the handle port (in the suspended state).
• Use sufficient medium (e.g., gel) on the treated parts.
• When not in use, place the handle on the accessory rack. Do not pull the connection cable forcefully.
• After use, clean the instrument with a cotton cloth and cotton swabs. Wipe metal parts of the cosmetic head/handle with 75% alcohol.
• If any abnormalities occur during use, stop operation immediately and consult an expert.
• If the instrument is abnormal, re-check instructions. If the issue persists, contact after-sales service; do not disassemble the instrument yourself.

4.4. 13D Operation Interface

The 13D handle is designed for facial lifting and skin firming, utilizing multi-dimensional ultrasonic technology. The interface allows for precise control over treatment parameters.

Figure 5: The 13D Operation Interface, showing various settings for facial treatments.

Corresponding Parts: Face (1.5mm, 3.0mm, 4.5mm), Chin (6.0mm), Thigh (10.0mm), Abdomen (8.0mm, 13.0mm), Buttocks (16.0mm, 18.0mm).

Interface Elements:

1. Handle code
2. Remaining number
3. Number of currently in use
4. Motherboard type
5. MP mode
6. Dot the animation area (displayed after startup)
7. Dot pattern
8. Probe frequency
9. Energy size regulation
10. Probe type (punch depth)
11. This time has operated the number of points
12. The total number of points in this operation is adjusted
13. Maximum number of points for this operation
14. Dot the number of lines adjustment
15. Dot the spacing adjustment
16. Dot length adjustment
17. Dot interval adjustment
18. Switch between startup and standby
19. Back
20. Setting

Adjusting Energy Intensity: Adjust according to the customer's bearing capacity.

• MP: Line - multi-point line mode.
• POINT: Dot - dot pattern.
• WIDTH (Number of rows): Adjusts the power of the hand during operation (range 2-13 rows).
• PITCH (Line spacing): Adjusts the distance between each line of energy (range 2.1-1.0). When adjusting the number of lines, the line spacing also changes correspondingly (e.g., 13-1.0, 12-1.1, ..., 2-2.1).
• LENGTH: Regulates the operation of the hand (range 5-25).
• INTERVAL: Adjusts the interval between each round. Lower interval means faster speed. Default is 1.5 (range 1.0-5.0).
• Set the number of sends: Adjust the required number of points using "+" and "-". The handle automatically stops when the set number is reached and needs to be reset.

4.5. 18D Operation Interface

The 18D RS Thermoplastic handle is used for remodeling body shape management, utilizing new AI spiral RF wave technology.

Figure 6: The 18D Operation Interface, showing various settings for body treatments.

Corresponding Parts: Abdomen (6.0mm, 8.0mm, 13.0mm), Thigh (10.0mm), Hips (16.0mm, 18.0mm).

Interface Elements:

1. Handle code
2. Remaining number
3. Number of currently in use
4. Motherboard type
5. MP mode
6. Dot the animation area (displayed after startup)
7. Dot pattern
8. Probe frequency
9. Energy size regulation
10. Probe type (punch depth)
11. Switch between startup and standby
12. Radio frequency (RF) energy regulation area
13. Multi-row mode selection
14. Circle mode selection
15. Back
16. Setting

Adjusting Energy Intensity: Adjust according to the customer's bearing capacity.

• MP: Line - multi-point line mode.
• POINT: Dot - dot pattern.
• RF ENERGY: Adjust RF energy intensity using "+" and "-".
• STANDBY: Start - The hand starts working.
• MODE SELECTION: Multi-row mode - Point-to-line mode.
• SHAPE SELECTION: Circle mode - Point coil state.
• BACK: Exit the operation screen and return to the Select hand screen.
• SETTING: Background setting parameters.

5. Maintenance

This equipment is primarily composed of precision optical and electronic instruments. Its maintenance and repair must adhere to general provisions for such devices. Proper storage and use are essential to prevent bumping, extrusion, and vibration.

• Clean accessories and the main machine with water, then dry with a clean damp rag. Store in a cool and dry place.
• The accessory rack and other panels are made of acrylic; do not wipe them with alcohol.
• Wipe and clean metal parts with 75% alcohol, then return them to the accessory rack to prevent falling damage.

6. Troubleshooting

• Smoke or Odor: If the instrument emits smoke or an unusual odor, immediately unplug the power supply and contact after-sales service.
• Abnormal Indicator/Sound: If the indicator is continuously bright blue or an abnormal sound is heard during operation, promptly remove the handle from the skin surface.
• Instrument Malfunction: If the instrument is abnormal, re-check the operating instructions. If the issue persists, contact after-sales service for consultation. Do not attempt to disassemble the instrument yourself.

7. Specifications

7.1. Product Configuration

Product Name: 22D-MAX
Model: 22D - MAX
Power Supply: AC 220V
Power: 1280W
Frequency: 2MHz, 4MHz
Instrument Weight: 10kg
Gross Product Quantity: 22kg
Package Size: 32 x 53 x 37 cm

7.2. Brushless Motor Parameters

The 22D MAX features a high-accuracy brushless motor with built-in multiple position sensors for exact positioning, enhancing handle operation speed and efficiency.

• Speed: More than 1600 revolutions per minute.
• High Torque: 30mNm, perfectly matches all skin types.
• Low Noise: Operates quietly.
• High Frequency: Up to 20,000Hz.
• Long Life: Efficient brushless motor with high-strength planetary gear.

Figure 7: Internal mechanism of the handle, highlighting the high-frequency brushless motor.

7.3. 13D Probe Configuration

The 13D probes are available in various depths for different treatment areas. All listed depths are optional, and energy/pulse number should be adjusted based on customer's situation.

Note: Use stamp method when operating. Point mode is suitable for delicate skin, MP mode is suitable for key strengthening.

Figure 8: A 13D probe for the 22D MAX machine.

7.4. 18D Probe Configuration

The 18D probes are designed for body contouring with various depths. All listed depths are optional, and energy/pulse number should be adjusted based on customer's situation.

Note: When using stamp technique, energy must be reduced. When using sliding technique, energy can be appropriately raised. Point mode is suitable for delicate skin, MP mode is suitable for emphasis enhancement. MODE SELECTION for all skin, SHAPE SELECTION for local enhancement.

Figure 9: An 18D probe for the 22D MAX machine.

8. User Tips

• Professional Use: This device is more suitable for use in beauty salons. For home or personal use, desktop devices may be more appropriate.
• Gradual Results: Clients often notice tightening effects after several sessions, though results are not instant. Manage client expectations accordingly.
• Training is Key: The machine is stable in performance and easy to use after proper training.
• Communication: Maintain smooth communication with clients, patiently answering technical questions and explaining the process.
• Skin Sensitivity: Adjust energy settings freely for sensitive pale skin and dark tanned skin separately to ensure comfort and effectiveness.
• Post-Treatment Care: Emphasize the importance of post-treatment moisturizing, hydration, and sun protection for optimal and lasting results.

9. Warranty and Support

The design specifications of this product are subject to change without prior notice. If in doubt, please contact us.

9.1. Warranty Information

• Main Engine: One-year warranty. A new machine can be replaced if non-human damage occurs within one month.
• Accessories: Three-month warranty. After three months, repair costs for parts will be borne by the user.
• Man-made Damage: Maintenance costs for man-made damage will be borne by the user.

9.2. Warranty Exclusions

No free warranty service is provided for failures caused by the following personal reasons:

• Unauthorized disassembly and modification of the product.
• Failure caused by careless handling or dropping.
• Failure to follow the correct instructions in the user manual.
• Lack of reasonable maintenance.