Rakoncnc RCM6090

Contents

Rakoncnc Double Head CNC Router User Manual

Model: RCM6090

1. Introduction

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Rakoncnc Double Head CNC Router. This machine is designed for precision engraving and milling of various materials, including wood and aluminum. Please read this manual thoroughly before operating the machine.

Rakoncnc Double Head CNC Router

Figure 1: Rakoncnc Double Head CNC Router

2. Safety Precautions

Failure to follow these safety instructions may result in serious injury or death.

Hazard: Mechanical Injury

  • Never touch the cutting tool with your hands while the spindle is rotating.
  • No part of your body may enter the work area while the machine is running.
  • Protective covers or safety light curtains must be installed and must not be removed.
  • Long hair must be tied up. Never wear gloves while operating rotating equipment.

Warning: Fire Risk

  • Wood chips and dust are flammable. Smoking is strictly prohibited in the work area.
  • Fire extinguishers must be available (carbon dioxide or dry powder recommended).
  • Clean the dust collection box daily. Do not leave it overnight.
  • Do not leave the machine while the spindle is cutting at high speed.

Note: Other Hazards

  • Equipment must be reliably grounded.
  • The spindle and drive are high-voltage components. Unauthorized personnel must not open the electrical control box.
  • The dust collection hose must not be entangled in moving parts.
  • Workpieces must be reliably fixed. Processing without securing the workpiece is strictly prohibited.

3. Product Components

The Rakoncnc CNC Router consists of several key components working in unison:

  • Bed: Cast iron/steel gantry frame for stability.
  • Spindle: Air-cooled/Water-cooled spindle motor (1.5KW water-cooling).
  • Control System: Handle/Computer control card + driver (NC studio, Mach3 optional).
  • Transmission System: Lead screw/rack + guide rail.
  • Accessories: Cutting tools, tool setter, clamping fixture, dust hood.

Control System Interface (e.g., Weihong/Baoyuan/Xindai)

  • Manual Mode: X/Y/Z axis jogging, spindle start/stop.
  • Automatic Mode: Load G-code, start machining.
  • Parameter Settings: Machining speed, spindle speed, origin setting.
CNC Router Quality Components: Drag Chain, Worktop, Spindle

Figure 2: Quality Drag Chain, Large Worktop, and Super Spindle

CNC Router Structural Components: Square Steel Gantry, Square Rail Diagonal Rack

Figure 3: Square Steel Integrated Gantry and Square Rail Diagonal Rack

4. Specifications

Detailed technical specifications for the Rakoncnc CNC Router (Model RCM6090):

CNC Router Specifications Table

Figure 4: Detailed Specifications Table

ItemDescription
Model NumberRCM6090
X,Y,Z Working Area600x900mm
Positioning Accuracy at Work0.03mm
FrameSeamless welded steel structure
Table SurfaceAluminum T-slot Table
X, Y,Z axis transmissionRack and pinion on x,y axis, z axis ball screw transmission
Rail ConfigurationSquare rail
Spindle PowerWater-cooling 1.5KW
Spindle rotating Speed0-24000RPM
Drive MotorsStepper System
Working VoltageAC220V/50HZ ; 60hz option
Operating SystemNC studio, Mach3 is optional
Command LanguageG code, u00, mmg, PLT, HPG
Software CompatibilityType3, Wentai (ArtCUT), ArtCAM, Aspire etc
PackingWooden case
Packing Size1520*1250*1750mm
Weight300kg
CertificationCE
ConditionNew
CNC or NotCNC

5. Setup

Startup Procedure

  1. Confirm emergency stop button pressed.
  2. Turn on main power switch.
  3. Release emergency stop button.
  4. Turn on control computer/handheld.
  5. Open control software.
  6. Reset alarm.
  7. Start spindle cooling system (water chiller).
  8. Start vacuum cleaner.
  9. Startup complete.

Workpiece Clamping Fixing Principles

  • Sheet metal must be clamped on all four sides or using vacuum-adhesive.
  • Temporary fixing with nails or double-sided tape is strictly prohibited.
  • Lightweight, thin sheets must be protected from vibration during cutting.

Tool Installation

  • Clean the tool holder and spindle collet (free of oil and wood chips).
  • Tool Extension Length: Just penetrate the workpiece + 3~5mm; excessive extension may break the tool.
  • Tighten the Locking Nut: Apply force with a wrench until locked; never start the machine without tightening.
  • Manually rotate the spindle to check for tool eccentricity and whether it is hitting the workpiece.

Tool Setting (Setting the Workpiece Zero Point)

  • Place the tool setting block on the workpiece surface.
  • Execute the "Automatic Tool Setting" command in the control software.
  • The system automatically records the Z-axis zero point.

Manual Tool Setting

  • X/Y Zero Point: Align the tool tip with the lower left edge of the workpiece.
  • Z Zero Point: Using a feeler gauge/tool setting block, lift the tool 0.1~0.2mm after it contacts the surface.
  • Zeroing: Set the current position as the workpiece coordinate in the software.

6. Operation

Program Loading

  • Generate toolpaths using software such as ArtCAM / AlphaCAM / Jingdiao / Wentai.
  • Post-process to machine tool recognition formats (.nc/.cnc/.u00/.tap, etc.).
  • Transfer to the controller via USB flash drive/network.
  • Dry Run Verification: Raise the Z-axis by 30mm, simulate operation, and confirm no collisions.

Start Machining

  • Close the safety door.
  • Reconfirm the vacuum is on.
  • Press "Cycle Start".
  • Pay close attention to the first cut: Observe the cutting sound and whether chip removal is normal.
  • If any abnormal noise, smoke, or displacement occurs, immediately press emergency stop.

Video 1: CNC Router engraving intricate designs on wood.

7. Maintenance

Shutdown Procedure

  1. Stop the machining program.
  2. Raise the tool to a safe height.
  3. Shut down the spindle.
  4. Exit the control software.
  5. Turn off the computer/handheld.
  6. Press the emergency stop button.
  7. Turn off the main power switch.
  8. Clean the worktable and dust collection box.
  9. Apply guide rail oil.

Weekly Maintenance

  • Clean rack and pinion; apply lithium grease.
  • Check spindle cooling system (water level/air filter).
  • Inspect all bolts and fasteners for looseness.
  • Test all axis movements for abnormal noise.
  • Clean dust collector filter.

Monthly Maintenance

  • Replace cooling water (water-cooled spindle).
  • Clean or replace spindle air filter (air-cooled).
  • Check drive belt tension.
  • Inspect electrical cabinet cooling fan.
  • Verify machine leveling.

Quarterly Maintenance

  • Deep clean electrical cabinet with dry compressed air (power off).
  • Check all limit switches and sensors.
  • Inspect ball screw nuts for backlash.
  • Test ground continuity.
  • Professional inspection of spindle bearings.

8. Prohibited Operations

To ensure safety and prevent damage to the machine, never perform the following actions:

  • NEVER change tools while spindle is rotating.
  • NEVER reach into work area during machine operation.
  • NEVER wear gloves while operating.
  • NEVER run machine with safety guards removed.
  • NEVER start water-cooled spindle without coolant.
  • NEVER machine unsecured workpieces.
  • NEVER use compressed air to blow down machine table (dust hazard).
  • NEVER leave machine unattended overnight (essential woodworking rule).
  • NEVER modify system parameters without authorization.

9. Troubleshooting

Common Operational Issues

  • Tool Collision: Often caused by forgetting to lift the tool after setting or incorrect Z-axis zero point. Always verify tool path and Z-height before starting.
  • Cutting Through Worktable: Occurs if material thickness difference (e.g., shim height) is not accounted for in the Z-axis settings. Double-check material thickness and Z-zero.
  • Abnormal Noise, Smoke, or Displacement: Immediately press the emergency stop button. Investigate the cause, which could be dull tools, incorrect feed rates, loose workpiece, or mechanical issues.

10. User Tips

  • Familiarization: Take time to become familiar with the control system and software settings. Initial minor adjustments are common.
  • Pre-Operation Check: Always inspect the machine for any signs of damage, especially after delivery or moving. Check cable chains and connections.
  • Value for Money: This machine offers excellent performance for its cost. Proper setup and maintenance will ensure long-term satisfaction.

11. Warranty and Support

For warranty information, technical support, and spare parts, please contact your seller directly. Ensure you have your model number (RCM6090) and purchase details available when contacting support.

© 2024 Rakoncnc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.