1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your iManAuto Wireless CarPlay & Android Auto Interface Box. This module integrates Apple CarPlay and Android Auto functionalities into your BMW NBT infotainment system, enhancing your driving experience with seamless smartphone connectivity.
1.1. Product Features
- CarPlay & Android Auto: Supports both wireless and wired connections for Apple CarPlay and Android Auto.
- Voice Control: Utilize Siri or Google Assistant for hands-free control of navigation, music, calls, and messages.
- Multimedia Playback: Synchronized mobile music playback with Hi-Fi sound quality.
- Online Navigation: Access a variety of real-time updated maps from your smartphone.
- Reversing Video Input: Supports factory original reverse camera, parking radar, aftermarket rear cameras, and front view cameras (CVBS INPUT/AHD 720P).
1.2. Compatibility
This interface box is designed for BMW vehicles equipped with the NBT (Next Big Thing) infotainment system, specifically for:
- BMW 1 Series
- BMW 2 Series
- BMW 3 Series
- BMW 4 Series
- BMW 5 Series
- BMW 7 Series
- BMW X1
- BMW X3
- BMW X4
- BMW X5
To confirm your system is NBT, check your car's original system Main Menu. An NBT system will typically show "ConnectedDrive" in the main menu. Also, verify the LVDS Video cable pins behind the screen are 6-PIN.

Figure 1: Gray Module for NBT system, showing BMW main menu with "ConnectedDrive" highlighted. This helps identify if your vehicle has the NBT system.

Figure 2: The iManAuto CarPlay/Android Auto interface box installed in a BMW dashboard, demonstrating CarPlay functionality.
1.3. Package Contents
Please check that all items are present in your package:
- CarPlay Module (Main Unit)
- Wifi Antenna
- CarPlay LVDS Cable
- CarPlay Main Cable (Power Harness)

Figure 3: Contents of the product package, including the main interface box, Wifi Antenna, LVDS Cable, and Power Harness.
2. Safety Information
CAUTION:
- Never turn on the ignition with the factory radio removed.
- Ensure the CarPlay module power is disconnected when adjusting the DIP switches. Connect power only after DIP switches are set.
- Installation should ideally be performed by a professional to avoid damage to the vehicle's electrical system or the product.
- Do not attempt to disassemble or modify the module. This will void the warranty and may cause damage.
3. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30°C to +75°C |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| USB Charging Current | ≤2A (If >1A, host activates circuit protection to control current below 1.5A) |
| Din Size | One Din |
| Operating System | Linux |
| Item Weight | 0.9kg |
| Digital Media Format | CD |
| Display Size Support | 6.5", 8.8", 10.25" |
| Certification | CE |
4. Installation Guide
This section outlines the steps for installing the CarPlay module. Professional installation is recommended.
4.1. DIP Switch Settings
Before connecting power, configure the DIP switches on the module according to your vehicle's specifications. Ensure the module is powered off when adjusting these switches.
| Switch | Function | Setting | Description |
|---|---|---|---|
| 1 & 2 | Car Model | OFF OFF | Default |
| 3 & 4 | Screen Size | OFF OFF | 800*480 (6.5") |
| 3 & 4 | Screen Size | OFF ON | 1280*480 (8.8"/10.25") |
Note: Ensure CarPlay POWER is disconnected when adjusting DIP switches. Reconnect power only after settings are finalized.
4.2. Wiring Connection
Follow these general steps for wiring. Refer to the detailed diagram for specific connections.
- Remove the original head unit/screen from your BMW.
- Connect the CarPlay module's LVDS-IN to the original vehicle's LVDS cable.
- Connect the CarPlay module's LVDS-OUT to the original vehicle's screen.
- Connect the CarPlay module's power harness to the original 48PIN plug.
- Connect the Wifi Antenna to the module.
- If installing an aftermarket camera, connect it to the appropriate AV port on the module and provide 12V power.
- Adapt fiber optic cables as necessary.
- Carefully route all cables and secure the module in a suitable location behind the dashboard.
- Reassemble the dashboard components.
Key Wiring Connections:
- Yellow: B+ (Battery Positive)
- Red: ACC (Accessory Power)
- Black: GND (Ground)
- Blue: Camera Power Supply (for aftermarket cameras)
- Brown: Rear Detect (Connect to rearview light cable or 360 panoramic detection cable)
- White and Black: 360-RX (Connect to 360 panoramic universal box TXD)
- MIC: Extra MIC interface
- REAR-CVBS: Connect to rearview camera or 360 panoramic AHD output
- FRONT-CVBS: Connect to the frontview camera
- AUX: Audio output
- USB: Connect mobile phone, USB flash drive, software upgrade
Audio Notes:
- Before switching to the CarPlay interface, connect your phone to the original car's Bluetooth and select both call and media. Then, select the original car audio on the Bluetooth stereo interface.
- Alternatively, before switching to the CarPlay interface, switch the original car sound channel to the AUX channel.
5. Operation
5.1. Switching Between Systems
- Long press the central control knob to switch between the original BMW iDrive system and the CarPlay/Android Auto interface.
- Alternatively, long press the BACK button on the central control knob to switch systems.
5.2. Wireless CarPlay Connection
- On your iPhone, enable Wi-Fi and Bluetooth.
- On the CarPlay module interface, navigate to "Wireless CarPlay Settings" -> "Discover and connect devices".
- Select the Bluetooth device named "CX_BT....." (the specific name may vary) from the list on your iPhone and pair it.
- Once paired, CarPlay should automatically connect.
5.3. Wireless Android Auto Connection
- On your Android phone, enable Wi-Fi and Bluetooth.
- On the CarPlay module interface, navigate to "Wireless Android Auto Settings".
- Select the Bluetooth device named "CX-BTXXXX" (the specific name may vary) from the list on your Android phone and pair it.
- Once paired, Android Auto should automatically connect.
5.4. Using Steering Wheel Buttons
- MODE Button (Short Press): Answer or hang up phone calls.
- MODE Button (Long Press): Activate language control (without using original car Bluetooth).
- Volume Buttons (+/-): Increase or decrease volume.
- Long Press System Reset: (Specific button not detailed, typically a long press on MODE or another control).
5.5. Using Central Control Knob
- Long Press: Switch between original system and CarPlay/Android Auto.
- Rotate: Move cursor/navigate menus.
- Short Press: Confirm selection.
- Flip Left/Right: Switch between previous/next songs.
- Long Press: Confirm activation of language control.
- Right Dial for 15 seconds: Reset.

Figure 4: Example of the mobile music playback interface displayed on the car screen.

Figure 5: Example of the online navigation interface displayed on the car screen.
6. Camera Configuration
The module supports various camera inputs. You can configure these settings within the "Car Setting" menu.
6.1. Camera Settings
Navigate to "Car Setting" -> "Advanced Features" to adjust:
- Parking Guideline
- Park Distance Control
- Original Camera (enable/disable)
- 360 Panoramic (if applicable)
- AHD Camera Type
- View (Front/Rear)
- Front View Camera
- Reverse Exit Delay
Note: If a reverse camera is added, the original camera function may be turned off.
6.2. Adding Reversing Camera Wiring
- Cam-Power: Connect to the camera's power supply.
- Rear-CVBS/AHD720P (25FPS/30FPS): Connect to the camera's video input.

Figure 6: Example of the rear camera view displayed on the car screen, showing parking guidelines.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Screen does not display normally | Check the LVDS cable connection and ensure DIP switches are set correctly for your screen size. |
| No sound or sound issues |
|
| Mainframe pilot lamp not working | Check the power cable connection and the fuse. |
| Original car information not showing | Check if the MOST (Media Oriented Systems Transport) fiber optic cable was moved to the right place during installation. |
| CarPlay/Android Auto not connecting wirelessly |
|
8. User Tips
Based on general user experiences with similar products:
- Stable Connection: For the most stable wireless connection, ensure your phone's Wi-Fi and Bluetooth are always on when entering the vehicle.
- Audio Quality: If you experience any audio quality issues, double-check that your car's audio input is correctly set to AUX or Bluetooth as per the installation instructions.
- Firmware Updates: Periodically check the manufacturer's website (if available) for firmware updates, which can improve performance and add new features.
No specific user tips were available from external reviews or Q&A for this product at the time of manual creation.
9. Support & Further Information
For more detailed diagrams and specific installation steps, you may refer to the official PDF user manual:
View Official User Manual (PDF)
If you encounter issues not covered in this manual, please contact your retailer or the product manufacturer for assistance.