iManAuto CX-ADM12

Contents

iManAuto Wireless CarPlay & Android Auto Module

Model: CX-ADM12

For Audi A3, A4, A5, Q2, Q5, Q7 MIB Systems

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your iManAuto Wireless CarPlay & Android Auto Module (Model: CX-ADM12). This module is designed to integrate seamlessly with your Audi's MIB system, enhancing your driving experience with modern connectivity features.

iManAuto Wireless CarPlay & Android Auto Module with in-car display

The iManAuto Wireless CarPlay & Android Auto Module installed in an Audi interior.

2. Safety Information

Please read all instructions carefully before installation and use. Improper installation or use may cause damage to the product or your vehicle. Ensure the vehicle is turned off and the battery is disconnected before performing any wiring or installation procedures. If you are unsure about any step, consult a professional installer.

3. Package Contents

Verify that all items are present in the package:

  • CarPlay Module (Approx. 30cm x 21cm x 2cm)
  • Power Cable
  • WiFi Antenna
  • LVDS Cable
  • Microphone (MIC)
Included accessories: Carplay Module, power cable, WiFi antenna, LVDS cable, and microphone.

Contents of the product package.

4. Specifications

Feature Specification
Operating Voltage 9-16V
Operating Temperature -30°C to +75°C
Stored Temperature -30°C to +85°C
Environment Humidity ≤98% (at 45°C), 65±5% (rated)
Power Consumption 500mA (rated), 3A (Max)
Shutdown Current 3mA (Clock is on)
Quiescent Current <3mA
USB Charging Current ≤2A (If >1A, host activates circuit protection to control current below 1.5A)
Din Size One Din
Operating System Linux
Item Weight 0.9kg
Digital Media Format CD
Display Size 7", 8"
Certification CE
Specifications table and DIP switch example from manual page 2.

Detailed specifications and DIP switch configuration example.

5. Compatibility

This module is compatible with Audi MIB/MIB2 systems for the following models and years:

  • Audi A3/S3: 2013-2018 (5.8/7 inch screen)
  • Audi A4L: 2017-2018 (7/8.3 inch screen)
  • Audi A5: 2017-2018 (7/8.3 inch screen)
  • Audi Q2L: 2018 (7/8.3 inch screen)
  • Audi Q5L: 2018 (7/8.3 inch screen)
  • Audi Q7: 2016-2018 (7/8.3 inch screen)

Important Note: This module is NOT compatible with original car models that have a touch screen.

User's Manual cover page with compatibility table and MIB2 version check.

Compatibility table and instructions for checking your Audi's system version and screen size.

Image highlighting compatibility for specific Audi models with MIB system and a crucial note about non-compatibility with original touch screen models.

Visual confirmation of compatible Audi models and the touch screen incompatibility warning.

6. Setup and Installation

6.1. DIP Switch Settings

Configure the DIP switches on the module according to your car model and screen size:

Car Model Screen Size DIP Switch 1 DIP Switch 2 DIP Switch 3 DIP Switch 4
A3/S3/Q2 400*240 5.8" OFF OFF OFF ON
2017-A4/A5/Q5/Q7 800*480 7" ON OFF OFF ON
2017-A4/A5/Q5/Q7 1024*480 8.3" OFF ON OFF ON

6.2. Wiring Diagram and Connections

Refer to the diagram below for connecting the module to your Audi's MIB system. Ensure all connections are secure.

Detailed wiring diagram for the ADM12 A3 module, showing connections for USB, rear camera, power, MIC, dip switch, WiFi, and LVDS to OEM components.

Wiring diagram for the ADM12 A3 module.

Page from the manual showing connection examples and detailed Audi MIB2 installation instructions, including steering wheel button functions, central control knob functions, and wiring connections.

Audi MIB2 Installation Instructions with detailed wiring and control functions.

  • LVDS Port: Connect the LVDS cable from the module to the original head unit.
  • ANT: Connect the WiFi antenna. Note: Antennas cannot be attached to hardware surfaces.
  • POWER: Connect the power cable with the following color codes:
    • Yellow: B+ (Battery Positive)
    • Red: ACC (Accessory Power)
    • Black: GND (Ground)
    • Blue: Camera power supply
    • Brown: Reverse detect
  • White and Black: 360-RX (for 360-degree camera systems)
  • MIC: Connect the extra microphone.
  • REAR-CVBS: Rear view input.
  • FRONT-CVBS: Front view input.
  • AUX: Audio output.
  • USB: Connect phone, USB disk, or use for software updates.

6.3. Initial Audio Setup Note

Before entering the installation system, ensure the following:

  1. Connect your phone to the original car's Bluetooth and select both call and media audio. Then, select the original car audio on the Bluetooth stereo interface.
  2. Alternatively, before entering the installation system, switch the original car's sound channel to the AUX channel.

7. Operating Instructions

7.1. Wireless CarPlay Connection

  1. On your iPhone, open Wi-Fi and Bluetooth settings.
  2. On the module's interface, click "Discover and connect device".
  3. Select the Bluetooth device name starting with "CX_BT....." and pair your iPhone. CarPlay should now activate wirelessly.

7.2. Wireless Android Auto Connection

  1. On your Android phone, open Wi-Fi and Bluetooth settings.
  2. On the module's interface, click the option for Android Auto connection (e.g., "CX-BTXXXX").
  3. Pair your Android device. Android Auto should now activate wirelessly.
Page from the manual illustrating wireless CarPlay and Android Auto connection methods, car settings for reverse camera and audio, and troubleshooting tips.

Steps for connecting Wireless CarPlay and Android Auto.

7.3. Car Settings and Features

  • Reverse Camera: If a reverse camera is added, the original camera input will be turned off. Ensure cam-power is connected to the camera power supply and rear-CVBS/AHD720P (25FPS/30FPS) is connected to the camera input.
  • Audio Settings:
    • If your original car has a Bluetooth phone function, a separate microphone for the module may not be needed.
    • Navigate to "Setup" -> "Audio Settings" and set "Use the original Bluetooth audio" to OFF.
    • For original multimedia selection, use AUX.
    • To use the module's audio, set "Use the original Bluetooth audio" to ON.
    • For cell phone Bluetooth connection to the original car's Bluetooth audio, select Bluetooth audio playback.

7.4. Using CarPlay/Android Auto Features

Once connected, you can access various functions through your car's display and controls:

  • Navigation: Use supported map applications with real-time traffic updates.
  • Music Playback: Stream music from your phone or USB devices with Hi-Fi sound quality.
  • Phone Calls: Make and receive calls using the integrated system.
  • Voice Control: Utilize Siri or Google Assistant for hands-free operation.
  • Split Screen Display: View multiple applications simultaneously.
Screenshots showing online navigation with multiple map options and music playback with various streaming services.

Examples of online navigation and music playback interfaces.

Collage of screenshots demonstrating various CarPlay functions: phone calls, split-screen navigation, music playback, Siri, and reverse camera view.

Demonstration of CarPlay features including phone, navigation, music, Siri, and reverse image.

7.5. Control Functions

The module integrates with your car's existing controls:

  • Steering Wheel Buttons:
    • Short press: Connect/hang up phone.
    • Long press: Activate language control (if not using original car Bluetooth).
    • Turn down volume: Increase/decrease volume.
    • Press left/right: Move up/down in menus.
    • Long press: Switch between systems.
  • Central Control Knob:
    • Long press: Switch between systems.
    • Rotate knob: Move cursor.
    • Short press: Confirm selection.
    • Long press: Confirm activation of voice control.
    • Long press for 15 seconds: Restart the system.
  • BACK Button: Long press the BACK button to switch to the CP system.
  • Restart: Press for 15 seconds to restart the system.

8. Troubleshooting

  • Screen not showing normally: Check the LVDS cable connection and ensure the DIP Switch settings are correct for your vehicle model and screen size.
  • Sound problems: Verify the Multimedia and install system settings of your original car are configured correctly, especially the AUX input or Bluetooth audio settings.
  • Mainframe pilot lamp not working: Inspect the power cable connection and check if the fuse is intact.

9. User Tips

  • Always double-check your Audi's MIB system version and screen size before installation to ensure correct DIP switch configuration.
  • For optimal audio quality, ensure the initial audio setup (Bluetooth or AUX) is correctly configured as per Section 6.3.
  • If experiencing connectivity issues, try restarting both your phone and the module (long press central control knob for 15s).

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact your seller. A comprehensive user manual in PDF format is available for download: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.