1. Introduction
Thank you for choosing the FLYDIGI VADER 5S Wired Controller. This manual provides detailed instructions on how to set up, operate, and troubleshoot your new gaming controller. Designed for Xbox Series X|S, Xbox One, and Windows 10/11, the VADER 5S features advanced technologies like FORCEFLEX adjustable tension joysticks and FORCESWITCH dual-mode triggers to enhance your gaming experience.
For the most up-to-date information and a full user manual, please scan the QR code provided on the packaging or refer to the official PDF manual: FLYDIGI VADER 5S User Manual (PDF).
2. Package Contents
Ensure all items are present in your package:
- FLYDIGI VADER 5S Wired Controller
- USB Type-A to Type-C Cable
- User Manual

3. Product Overview
Familiarize yourself with the layout and functions of your FLYDIGI VADER 5S controller:


4. Connecting to Xbox/PC
The FLYDIGI VADER 5S is a wired controller. Follow these steps to connect it to your Xbox console or PC:
- Connect the Type-A end of the provided cable to an available USB port on your Xbox or PC.
- Connect the Type-C end of the cable to the Type-C port located on the top of the controller.
- Press the Xbox button (
) once to initiate the connection. - A short vibration and a steady white indicator light on the controller will confirm a successful connection.

5. Operating Instructions
5.1. FORCEFLEX Adjustable Tension Joysticks
The FORCEFLEX joysticks allow you to customize the stick tension to your preference. Rotate the force-adjustment ring at the base of the joystick:
- Clockwise: Increases tension for more stable and precise control.
- Counterclockwise: Decreases tension for more flexible and less tiring movements.
You can tune stick tension from 40gf to 100gf:
- 40gf - 60gf: Light & fast response
- 60 - 80gf: Balanced & stable control
- 80gf - 100gf: Firm & precise inputs


5.2. FORCESWITCH Dual-Mode Triggers
The FORCESWITCH triggers offer two distinct modes for different gaming genres:
- Micro-Switch Mode: Provides clicky actuation and zero pre-travel, ideal for FPS games.
- Linear Mode: Offers precise travel and fine-tuned vibration, perfect for racing games.

5.3. Remappable Extra Buttons
The controller features 6 extra remappable buttons (LM, RM, M1, M2, C, Z) to customize your gameplay without finger scrambling.
- LM + RM Extra Bumpers: Effortless weapon swaps even when tense aiming.
- M1 + M2 Back Buttons: Crouch/Jump without your thumb, leaving the stick focus on aiming.
- C & Z Extra Face Buttons: Effortless combo inputs in fighting games.

5.4. Flydigi Space Station Software
Download "Flydigi Space Station For Xbox" from the Microsoft Store to unlock full customization options for your controller, including:
- Button Remapping: Adjust the mapping functions of extra buttons.
- Vibration Adjustment: Adjust trigger and grip vibration intensity.
- Custom Lighting: Adjust light bar effects, colors, and brightness.
- Stick Adjustment: Set center dead zone and sensitivity curves.

5.5. Shortcut Functions
The controller includes several convenient shortcut functions:
| Function | Operation |
|---|---|
| Switch Onboard Profile | Hold FN + ABXY for 1 second. The controller vibrates twice. (FN+A: Default Profile, FN+B: Profile 2, FN+X: Profile 3, FN+Y: Profile 4) |
| Set Button Remapping | Hold FN + C/Z/M1/M2/LM/RM for 1.5 seconds. The light bar flashes, then press the button you want to map. |
| Enable/Disable Button Remapping | Hold the FN button for 1.5 seconds and release to enable/disable remapping. |
| Quick Output Volume Adjustment | Hold FN + Left Stick ↑/↓. (Only adjusts headphone volume. Requires headphones to be connected.) |
| Quick Input Volume Adjustment | Hold FN + Right Stick ↑/↓. (Only adjusts headphone volume. Requires headphones to be connected.) |
| Quick Grip Vibration Adjustment | Hold FN + Right Stick ↑/↓ (6 levels total) |
| Quick Impulse Trigger Adjustment | Hold FN + Left Stick ↑/↓ (6 levels total) |
| Calibration | Hold View + Menu + D-pad ↑ for 3 seconds to activate calibration. |
| Restore Factory Settings | Hold View + Menu + FN for 3 seconds to restore factory settings. |
| Microphone mute/unmute | Short press Mute Button. (Steady red light = Mic muted. Light off = Mic active) |
5.6. One-Touch Wake-Up
When your Xbox is in sleep mode, briefly press the Xbox button (
) on the controller to wake up the Xbox.

5.7. On-the-Fly Vibration Tuning
Adjust vibration intensity for triggers and grips directly during gameplay:
- Adjust Trigger Vibration: Hold FN + Left Stick ↑/↓.
- Adjust Grip Vibration: Hold FN + Right Stick ↑/↓.

5.8. Xbox-native Vibration
The controller features four motors for full immersion, with independent trigger and grip vibration for richer feedback. Feel throttle, recoil, and resistance through the triggers, and sense terrain and impact directly in your hands.

6. User Tips
- Customization is Key: Take advantage of the Flydigi Space Station software to fine-tune button mappings, joystick curves, and vibration feedback to match your playstyle. This can significantly improve your performance and comfort.
- Experiment with Joystick Tension: Don't be afraid to adjust the FORCEFLEX joystick tension. A tighter setting might be better for precise aiming in shooters, while a looser setting could be more comfortable for prolonged play in other genres.
- Utilize Extra Buttons: Remap the M1/M2 back buttons and LM/RM bumpers for frequently used actions to keep your thumbs on the joysticks, improving reaction time.
- Check for Updates: Periodically check the Microsoft Store for updates to the "Flydigi Space Station For Xbox" software to ensure you have the latest features and bug fixes.
7. Troubleshooting
7.1. Abnormal Trigger/Stick Data
If you experience abnormal trigger or stick behavior, perform a controller calibration:
- Press and hold View + Menu + D-pad ↑ for approximately 3 seconds. The controller's light bar will slowly flash golden, indicating calibration mode.
- Push both joysticks fully to their maximum extent. While holding them, rotate both joysticks counter-clockwise twice, then rotate the right joystick clockwise twice. Release the joysticks.
- Fully press and release both triggers twice.
- Briefly press View + Menu + D-pad ↑. The controller will emit a short vibration, and the lights will revert to default, indicating calibration is complete.
Automatic Calibration: The controller performs an automatic calibration upon startup. Ensure joysticks are in the central position and triggers are in their initial position during startup.
7.2. Abnormal Controller Button Behavior
If buttons are behaving abnormally, first try disabling button remapping to see if the issue is resolved. Default key values can be restored using the Flydigi Space Station software.
7.3. Controller Malfunction Cannot Be Recovered
If the controller is unresponsive or malfunctioning, you can restore factory settings:
- While connected to Xbox/PC, hold View + Menu + FN for 3 seconds to restore factory settings.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | FLYDIGI |
| Model Number | FLYDIGI VADER 5S |
| Type | Gamepads |
| Compatible Platform | Xbox, PC |
| Compatible Brand/Model | PC |
| PC System | Windows 10 |
| Interface Type | Type C (Wired) |
| Hall Effect | Yes (Joysticks & Triggers) |
| Trigger Button Type | Hall-Linear |
| D-pad Switch Type | MICRO SWITCH |
| ABXY Switch Type | MICRO SWITCH |
| Bumpers Switch Type | MICRO SWITCH |
| Wear-resistant joysticks | Yes |
| RGB lighting joysticks | Yes |
| Support Software configuration | Yes |
| Battery Included | No |
| High-concerned chemical | None |
| Operating Current | 0.2A |
| Temperature Range (Operate & Store) | -10°C ~ 50°C |
| Package Dimensions (L x W x H) | 20 cm x 14 cm x 10 cm |
| Package Weight | 0.55 kg |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official FLYDIGI website or contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.
Additional resources, including the full user manual, can be found by scanning the QR code on the product packaging or by visiting the official FLYDIGI support page.
10. Environmental Information
This product complies with environmental protection standards regarding hazardous substances. The table below details the name and content of harmful substances in the product, in accordance with SJ/T 11364 and GB/T 26572-2011 regulations.
| Part Name | Toxic or Hazardous Substances and Elements | |||||
|---|---|---|---|---|---|---|
| Pb (Lead) | Hg (Mercury) | Cd (Cadmium) | Cr (VI) (Hexavalent Chromium) | PBB (Polybrominated Biphenyls) | PBDE (Polybrominated Diphenyl Ethers) | |
| PCB Board | ○ | ○ | ○ | ○ | ○ | ○ |
| Shell | ○ | ○ | ○ | ○ | ○ | ○ |
| Packaging | ○ | ○ | ○ | ○ | ○ | ○ |
| Wire | ○ | ○ | ○ | ○ | ○ | ○ |
| Small structural parts such as metal and tape | ○ | ○ | ○ | ○ | ○ | ○ |
Note:
○ Indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit specified in GB/T 26572-2011.
☒ Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the provisions of GB/T 26572-2011.
11. FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.