1. Safety Information
⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
2. Package Contents
After opening the package, please check if all accessories are complete:
- Camera x1
- Data Cable x1
- Base Bracket x1
- User Guide x1

3. Product Overview
The JOZUZE O-KAM Mini HD WiFi IP Camera is a compact device designed for home security and video recording. It features 1080P Full-HD video, a 120-degree wide-angle lens, motion detection, and remote viewing capabilities.
3.1. Product Interface Description
Familiarize yourself with the camera's ports and buttons:

- Indicator Light: Provides status feedback.
- TF Card Slot: For inserting a MicroSD (TF) card for local storage.
- Power Button: Used to turn the device on/off and for reset procedures.
- Type-C Port: For connecting the power cable.
- Reset Button: Used to reset the camera to factory settings.
- HD Lens: The camera's main lens for capturing video.
3.2. Indicator Light Status Description
| Indicator Light | Device Status |
|---|---|
| Blue light flashes slowly | Waiting for network configuration / Network configuration failed |
| Blue light always on | Network Configuration completed |
| Blue light flashes quickly | Disconnected from the network |
| Slow flashing red and blue lights alternately | Long press the reset button to reset / Device unbinding |
| The red light remains on for a long time | AP mode |
| Red light always on | Charging |
| Red light goes out | Fully charged |
4. Setup
4.1. Powering On and Resetting the Camera
To power on the camera, press and hold the Power button for 3 seconds. A blue light flashing indicates a normal state. If the camera does not power on or function correctly, you may need to reset it.
To Reset: While the camera is powered on, press and hold the Reset button for 3-5 seconds until the indicator light alternates between blue and red blinking slowly. Then release the reset button. Wait for the camera to restart, indicating a successful reset. After a successful reset, the camera restarts and the blue light flashes slowly and then becomes constantly on.
4.2. App Download and Installation
To use the camera's smart features, download and install the 'O-KAM' app on your mobile phone. You can scan the QR code below or search for 'O-KAM' in your phone manufacturer's app store.

After installation, please register an app account and log in. If you are already registered, log in directly.
4.3. Device Connection (Bluetooth Adding)
Follow these steps to connect your camera to the app:
- Ensure your phone's Bluetooth is turned on.
- Open the O-KAM app.
- Click "Add Device" (usually represented by a '+' icon or similar).
- The app will automatically detect the camera via Bluetooth. Select the Bluetooth device with the same ID name as the label on the camera body and click "Connect".
- Select your Wi-Fi network. Important: Please select a 2.4GHz frequency Wi-Fi signal for setting. 5GHz frequency Wi-Fi signals are not supported.
- Enter the correct Wi-Fi password and click "Next".
- Wait for the connection process to complete (approximately 1-2 minutes). Do not disconnect the network during this time.
- Once the configuration is successful, the blue indicator light on the camera will flash slowly and then become constantly on.
- Add a name to the camera (e.g., "Living Room Camera"), which can be customized.
- You may skip optional steps like cloud storage subscription if not desired.

5. Operating Instructions
5.1. Remote Viewing and Monitoring
Once connected to your Wi-Fi network, you can view real-time video from anywhere using the O-KAM app. The app allows you to add and monitor up to 50 cameras simultaneously.

5.2. Smart Motion Detection
The camera features smart motion detection. When motion is detected, you will receive instant notifications with snapshot images directly to your phone via the app.

5.3. Power Supply and Battery Life
The camera is equipped with a built-in 500mAh battery, providing approximately 2 hours of working battery life. For continuous operation, it supports 7*24 hours, 365 days work when connected to a USB power source.

5.4. Device Sharing
You can share access to your camera with family or friends through the app. Open the app, select your camera on the home page, and click "Share" in the camera settings. A QR code will be generated for others to scan and gain access. If device sharing permission is enabled, the shared user can set the device's functions. If disabled, they can only view the video.
5.5. Night Vision
The camera has built-in infrared lights for night vision. When night vision is active, the camera may show some faint red lights, but the image quality remains clear in dark environments.
6. Maintenance
To ensure optimal performance and longevity of your camera, keep it clean and free from dust. Avoid exposing it to extreme temperatures or moisture. Regularly check for firmware updates through the O-KAM app to benefit from improved features and stability.
7. Troubleshooting (Frequently Asked Questions)
7.1. What should I do if the device malfunctions?
Press and hold the power button to restart the camera. If there is no response, find the reset button at the bottom of the camera and press and hold it to reset the device.
7.2. Unable to add the camera for the first time?
When adding the camera for the first time, ensure the camera is powered on and the status light is blinking blue slowly.
- Ensure the Wi-Fi name and password are correct.
- When adding the camera, ensure the network is stable; it is recommended to operate near the router.
- If QR code network configuration is unsuccessful, try using AP configuration (After the phone connects to the Wi-Fi hotspot emitted by the camera, return to the App to add automatically). Try not to set a complex password, and avoid special characters.
- If both methods still fail, try restarting the router and then attempt again.
- Provide the router's nameplate label if contacting support.
7.3. TF card not recognized?
After inserting the TF card into the camera's TF card slot, check in the O-KAM app under Device "System Settings" - "TF Card Recording Settings" to see if the TF card's capacity is displayed. If it prompts "No TF card detected", it means the TF card recognition failed.
- Please use a branded TF card.
- The TF card should be recognized normally by a computer.
- Only FAT32 format is supported.
- It is recommended that the TF card capacity be between 2-128GB.
7.4. Why doesn't the Wi-Fi name appear when I try to connect to Wi-Fi?
On Apple devices with iOS 13 or later, you need to enable "Location Permissions" for this app in the settings, changing it to "While Using the App" or "Always".
7.5. How far should the camera be from the router?
Tests show that the Wi-Fi connection distance can normally reach up to 50 meters in open areas. However, the actual situation depends on the Wi-Fi strength and its surrounding environment (thick walls, electromagnetic equipment, and large metal objects can all interfere with the Wi-Fi signal). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | JOZUZE |
| Type | Mini Camera |
| High Definition Support | 1080P (Full-HD) |
| Video Frame Rate | 15fps |
| Wide-angle | 120° |
| Camera Stabilization | NONE |
| Built-in Memory Size | Non (External TF Card required) |
| Battery Capacity | 500mAh |
| Working Battery Life | Approx. 2 hours |
| Continuous Operation | 7*24 hours, 365 days (when connected to USB power) |
| Wi-Fi Frequency | 2.4GHz Only (5GHz not supported) |
| TF Card Support | FAT32 format, 2-128GB recommended |
| Dimensions (Camera Body) | 43mm x 33mm |
| Lens Diameter | Φ9mm |
| Package | Yes |
| Origin | Mainland China |
9. User Tips
- Image Quality: Users generally find the image quality to be very good for the camera's compact size.
- Connectivity: To ensure stable Wi-Fi connection, especially during initial setup and if experiencing disconnections, keep the camera close to your 2.4GHz Wi-Fi router. Avoid areas with thick walls or electromagnetic interference.
- iOS Location Permissions: If using an Apple device with iOS 13 or later and encountering Wi-Fi connection issues, remember to enable "Location Permissions" for the O-KAM app in your phone settings, setting it to "While Using the App" or "Always".
- TF Card Compatibility: Always use a branded TF card formatted to FAT32, with a recommended capacity between 2-128GB, to avoid recognition issues.
10. Support
For further assistance, please refer to the official user manual PDF available at: User manual (PDF).