LINCUKOO Water Leakage Alarm Sensor

Contents

LINCUKOO Tuya WiFi Water Leakage Alarm Sensor User Manual

Model: Water Leakage Alarm Sensor

1. Product Overview

The LINCUKOO Tuya WiFi Water Leakage Alarm Sensor is designed to detect water leaks and drips in your home, providing instant alerts via the Tuya Smart or Smart Life app and a loud 110dB siren. It connects directly to your 2.4GHz WiFi network without the need for a separate gateway.

LINCUKOO Water Leakage Alarm Sensor with Tuya logo and WiFi symbol

Image: LINCUKOO Water Leakage Alarm Sensor, powered by Tuya, with WiFi connectivity.

2. Package Contents

  • LINCUKOO Tuya WiFi Water Leakage Alarm Sensor
  • User Manual (this document)
  • Pre-installed batteries

3. Setup and Installation

This sensor connects directly to your home's 2.4GHz WiFi network. No additional gateway is required.

LINCUKOO Water Leakage Alarm Sensor with text 'TW: Only be used on Tuya platform, connect to 2.4GHz wifi, don't need gateway'

Image: The sensor is designed for the Tuya platform and connects directly to 2.4GHz WiFi without a gateway.

  1. Download the App: Search for "Tuya Smart" or "Smart Life" in your mobile app store (App Store for iOS, Google Play for Android) and install it.
  2. Register/Log In: Open the app and register for a new account or log in if you already have one.
  3. Prepare for Pairing:
    • Ensure your smartphone is connected to a 2.4GHz WiFi network. The sensor does not support 5GHz WiFi.
    • Place the sensor near your WiFi router during the initial setup process.
    • The sensor comes with pre-installed batteries. Remove any battery insulation tab if present to power it on.
  4. Add Device in App:
    • In the Tuya Smart/Smart Life app, tap the "+" icon in the top-right corner to add a device.
    • Select "Security & Video Surveillance" or "Sensors" and then choose "Water Leakage Detector (Wi-Fi)" or a similar option.
    • Follow the on-screen instructions to put the sensor into pairing mode. This usually involves pressing and holding a button on the sensor until an indicator light blinks rapidly.
    • Confirm the indicator light is blinking rapidly in the app and proceed to connect.
    • Enter your 2.4GHz WiFi network password when prompted.
    • Wait for the app to discover and connect to the sensor. Once connected, you can rename the device and assign it to a room.
  5. Placement: Place the sensor in areas prone to water leaks, such as basements, kitchens, bathrooms, near water heaters, washing machines, or under sinks. The sensor can detect both water leaking from below and water dripping from above.

4. Operating Instructions

Once set up, the sensor continuously monitors for water presence.

  • Water Detection: The sensor features an optimized water diversion design for rapid detection. When water is detected by its probes, it triggers an alarm.
  • Close-up of sensor bottom with water diversion channels

    Image: Optimized water diversion design for faster detection.

  • Alarm Notification: Upon detection, the sensor will:
    • Emit a loud 110dB siren locally.
    • Send instant push notifications to your smartphone via the Tuya Smart/Smart Life app.
  • Sensor detecting water near a sink, phone showing 'Water Leakage Alarm' notification

    Image: The sensor sends app notifications and sounds an alarm upon water detection.

  • Detection Capability: The sensor is designed to detect both water leakage from surfaces below it and water dripping from above onto its surface.
  • Sensor placed to detect leaking from below and dripping from above

    Image: The sensor can detect both water leakage from below and dripping from above.

  • App Features: Through the app, you can view the sensor's status, check alarm history, and configure notification settings.

5. Maintenance

  • Battery Replacement: The sensor uses pre-installed batteries designed to last over 2 years. Even when the battery is low, it can last for an additional 1-2 months. When the battery is depleted, the app may notify you, or the sensor's indicator light might signal low power. Replace batteries as needed.
  • Sensor showing internal batteries

    Image: The sensor uses pre-installed batteries with a long lifespan.

  • Cleaning: Periodically wipe the sensor's exterior with a dry, soft cloth to remove dust or debris. Ensure the water detection probes on the bottom are clean and free from obstruction for optimal performance. Do not use abrasive cleaners or immerse the sensor in water (unless testing its waterproof capability briefly).

6. Troubleshooting

  • Sensor cannot connect to WiFi:
    • Ensure your WiFi network is 2.4GHz. The sensor does not support 5GHz.
    • Make sure your phone is connected to the same 2.4GHz WiFi network during setup.
    • Place the sensor close to your WiFi router during the pairing process.
    • Check if the sensor is in pairing mode (indicator light blinking rapidly). If not, reset it according to the app's instructions or by pressing its button.
    • Verify your WiFi password is entered correctly in the app.
  • Cannot receive app notifications:
    • Check your phone's notification settings for the Tuya Smart/Smart Life app to ensure notifications are enabled.
    • Verify that the sensor is connected to WiFi and shows "Online" in the app.
    • Ensure your phone has an active internet connection.
    • Check the sensor's settings within the app to confirm alarm functions and notifications are enabled.
  • Alarm not sounding:
    • Ensure the sensor has power (check battery status in the app).
    • Test the sensor by briefly touching its probes with a wet finger or placing it in a small amount of water to confirm it detects water.
  • Sensor is too sensitive:
    • The sensor is designed to be highly sensitive. Alarms triggered by touching the probes with a wet hand are normal. Ensure it's placed on a dry, stable surface.

7. Specifications

Sensor submerged in water, illustrating IP66 waterproofing

Image: The sensor features IP66 waterproofing for use in humid environments.

BrandLINCUKOO
ModelWater Leakage Alarm Sensor
ConnectivityWi-Fi 2.4GHz (IEEE 802.11 b/g/n), Tuya Platform
Alarm Sound Level110dB
Waterproof RatingIP66
Battery Life>2 years (up to 1-2 months on low battery)
CertificationsCE, FCC, RoHS
Dimensions (Approx.)15 cm (L) x 15 cm (W) x 10 cm (H)
Weight (Approx.)0.08 kg
OriginMainland China

8. User Tips

  • Strategic Placement: For optimal protection, place sensors in multiple critical areas such as under sinks, behind toilets, near water heaters, washing machines, dishwashers, and in basements or utility rooms.
  • Regular Testing: Periodically test your sensor by briefly wetting its probes to ensure it's functioning correctly and sending notifications.
  • WiFi Signal Strength: Ensure the sensor is placed in an area with good 2.4GHz WiFi signal strength for reliable connectivity and timely alerts.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the LINCUKOO customer support directly through your purchase platform.

A PDF user manual might be available for download from the seller's product page: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.