Introduction
Thank you for choosing the DZTR LED Headlight Mini Lens Projector. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED headlights. Please read these instructions carefully before installation and keep this manual for future reference.
Image: DZTR Upgraded Small Lens Car LED Headlight
Important Safety Information
To ensure your safety and the proper functioning of the product, please observe the following precautions:
- Professional Installation Recommended: It is highly recommended to have the product installed by professionals who are familiar with the installation process.
- Pre-Installation Check: Before proceeding with the installation, please verify that the LED specifications correspond to the size of the original bulb to ensure compatibility.
- Avoid Touching LED Lamp Beads: Do not touch the LED lamp beads with bare hands. No objects should be in contact with the surface of the lamp beads, as it may adversely affect the service life.
- Exercise Caution with Radiator: Exercise caution to prevent direct contact with the lamp body's radiator to avoid skin burns, as it can become hot during operation.
- Maintain Stable Voltage: For specialized LED applications in certain vehicles, start the car engine to maintain the original car voltage within a normal range. This helps prevent insufficient battery power, ensuring the LED operates correctly.
- Turn Off Headlights Promptly: After driving, promptly turn off the headlight to prevent the car battery from being depleted due to continuous operation.
- Responsible Light Usage: Use the lights judiciously, consciously and reasonably switching between high beam and low beam. This prevents dazzling oncoming drivers and reduces the risk of traffic accidents caused by excessive brightness.
Product Overview and Features
The DZTR LED Headlight Mini Lens Projector is designed for enhanced visibility and durability. Key features include:
- High Brightness: Equipped with 6 PCS CSP chips for a concentrated and bright light output.
- Efficient Cooling System: Features a dual heat dissipation system with a 6063 aviation aluminum alloy heat sink and a 12,000 RPM high-speed silent turbo fan to ensure optimal operating temperature and extended lifespan.
- Durable Construction: Built with a copper substrate and aviation aluminum alloy casing for quick cooling and robust performance.
- Advanced Optics: Incorporates an HD condenser large lens for bright and focused light.
- Integrated Control: Includes IC intelligent temperature control and Anti-EMC technology for stable operation.
- Weather Resistance: IP68 waterproof and dust-proof grade ensures reliable performance in various conditions.
Specifications
| Feature | Detail |
|---|---|
| LED Chips | Automotive grade IX-4575 custom chip (6 PCS CSP chips) |
| Color Temperature | 6000K |
| Working Voltage | 12 V |
| Wattage | 80W |
| Lumen Output | 10000LM (Note: Some marketing materials may state 120000LM, but 10000LM is the typical output for a pair of high-quality LED bulbs.) |
| Waterproof Rating | IP68 |
| Material | 6063 aviation aluminum |
| Cooling System | Built-in Fan (12000RPM Turbo Fan) + Heat Sink |
| Lifetime | ≥30000 hours |
| Car Brand Compatibility | ALL |
| Car Model Compatibility | ALL |
| Item Type | Other (Headlight Bulb) |
Installation Guide
Follow these steps for proper installation of your DZTR LED Headlight Mini Lens Projector. Professional installation is recommended.
Video Installation Overview
Video: Product demonstration and installation guide, showing components, assembly, and light performance.
Step-by-Step Installation
-
Preparation:
- Ensure the vehicle is turned off and the headlight assembly is cool to the touch.
- Verify that the LED bulb type (H7, H11, 9005, 9006) matches your vehicle's original bulb.
- Critical Compatibility Check: Inspect your headlight assembly. If the assembly opening is less than 20mm, these bulbs cannot be installed. Refer to the diagram below for visual guidance.
Image: Headlight Assembly Compatibility Check (Assembly < 20mm cannot be installed) -
Remove Old Bulb:
- Locate and remove the dust cover from the back of the headlight housing.
- Carefully remove the guiding ring (if present) from the headlight assembly.
- Detach and remove the old bulb from the headlights.
-
Install LED Bulb Holder:
- Take the separate holder ring from the new LED bulb.
- Clip the holder ring onto the headlight assembly hole, ensuring it is securely seated in the exact spot where the rim of the old bulb was positioned.
-
Connect Wiring:
- Connect the electrical connector of the LED bulb to the vehicle's wiring harness. Ensure a secure connection.
-
Insert LED Bulb:
- Insert the LED bulb into the previously installed holder.
- Adjust the angle by rotating the lamp body. It is crucial to ensure the flat side of the bulb containing the LED chips faces left and right for the correct beam pattern (low beam).
Image: H7 LED Headlight Bulb -
Secure and Test:
- Fit the dust cover back onto the headlight housing to protect the connection and internal components from dust and moisture.
- Turn on your vehicle's headlights to test for proper function and beam alignment. Adjust if necessary.
Operation
These LED headlights are designed for low beam applications. Once installed, operate them as you would your vehicle's standard headlights.
- Turning On/Off: Use your vehicle's standard headlight switch to turn the LED headlights on or off.
- Beam Pattern: The mini lens projector design provides a focused low beam pattern. Ensure the bulbs are oriented correctly during installation (flat side with chips facing left and right) for the optimal cut-off line and to avoid dazzling oncoming traffic.
- Canbus Compatibility: These bulbs feature Canbus compatibility to prevent error messages in most modern vehicles. If you experience flickering or error messages, a separate Canbus decoder might be required for your specific vehicle model.
Maintenance
To ensure the longevity and optimal performance of your DZTR LED Headlights, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the exterior of your headlight lenses to ensure maximum light output. Use a soft cloth and a mild cleaning solution.
- Inspect Wiring: Occasionally check the wiring connections for any signs of wear, corrosion, or looseness. Secure any loose connections.
- Dust Covers: Ensure the headlight dust covers are always securely in place to protect the bulbs and internal components from moisture and debris.
- Avoid High-Pressure Washing: When washing your vehicle, avoid directing high-pressure water jets directly at the headlight assemblies, especially around the dust covers.
- Temperature Management: The built-in cooling system is designed to keep the bulbs operating efficiently. Ensure there is no obstruction to the fan or heat sink to allow for proper airflow.
Troubleshooting
If you encounter issues with your LED headlights, refer to the following common problems and solutions:
- Bulb Not Lighting Up:
- Check all electrical connections to ensure they are secure and properly seated.
- Verify that the vehicle's headlight switch is in the ON position.
- Test the bulb in another compatible socket if available, or test the socket with a known working bulb.
- Check for blown fuses in your vehicle's fuse box related to the headlights.
- Flickering or Error Messages (Canbus Issues):
- Although these bulbs are Canbus compatible, some sensitive vehicle systems may still require an additional external Canbus decoder. Consider purchasing and installing a suitable decoder if flickering or error messages persist.
- Ensure the vehicle's engine is running when testing, as some systems behave differently with engine off.
- Poor Beam Pattern or Glare:
- Re-check the bulb orientation. The flat side with the LED chips must face left and right for the correct low beam cut-off.
- Ensure the bulb is fully seated and locked into the headlight assembly holder.
- If necessary, have the headlight beam professionally aimed.
- One Bulb Works, Other Does Not:
- Swap the bulbs between the working and non-working sides to determine if the issue is with the bulb or the vehicle's wiring/power.
- Check connections and fuses for the non-working side.
User Tips
- Always double-check the bulb type (H7, H11, 9005, 9006) required for your specific vehicle model before purchasing to ensure perfect fitment.
- When installing, take your time to ensure the bulb is correctly seated and oriented. Proper orientation is key to achieving the intended beam pattern and avoiding glare for other drivers.
- If you are unsure about any step of the installation process, it is always best to consult with a professional automotive technician.
Warranty & Support
Warranty Service
- Warranty Period: Valid for 18 months from the date of purchase or installation.
- Coverage: The manufacturer provides free warranty services for product quality issues arising from non-human damage during the specified warranty period.
- Customer Obligations: To avail the warranty, customers must present the warranty card or relevant valid bills as proof of purchase.
- Warranty Void Conditions: The manufacturer is not responsible for warranty claims if the warranty card is inaccurately filled out or if the related bills are inconsistent or altered.
- Warranty Registration: Kindly mail the completed warranty card back to the manufacturer for registration within three months of purchase to activate the warranty coverage.
For further support or inquiries, please refer to the contact information provided with your purchase or on the official DZTR website.
Additional Documentation
A comprehensive user manual in PDF format is available for download. This document contains detailed diagrams and further information regarding your product.
You can access the PDF manual here: View User Manual (PDF)