coolo ZG-205Z/C (ZigBee) / ZG-205W/C (Wi-Fi)

Contents

Tuya ZigBee 24G MmWave Radar Human Presence Sensor

Model: ZG-205Z/C (ZigBee) / ZG-205W/C (Wi-Fi)

Brand: coolo

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your Tuya ZigBee 24G MmWave Radar Human Presence Sensor. This advanced sensor is designed to accurately detect human presence, including static states and micro-motions, and integrates seamlessly with smart home systems via Tuya ZigBee or Wi-Fi (optional). Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

Tuya ZigBee 24G MmWave Radar Human Presence Sensor
Figure 1: Tuya ZigBee 24G MmWave Radar Human Presence Sensor with Zigbee and Tuya logos.

2. Safety Information

  • Ensure the power supply is disconnected before installation or maintenance.
  • Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
  • Do not expose the device to water or extreme temperatures.
  • Keep out of reach of children.
  • This device is for indoor use only.

3. Package Contents

Please check the package for the following items:

  • Smart Human Presence Sensor Unit (ZG-205Z/C or ZG-205W/C)
  • Mounting Accessories (e.g., screws, brackets)
  • User Manual (PDF version available: View PDF)
Product packaging box with model details
Figure 2: Product packaging showing model numbers and specifications.

4. Specifications

Feature Specification
Model ZG-205Z/C (ZigBee) / ZG-205W/C (Wi-Fi)
Brand Name coolo
Input Voltage AC 85-265V
Operating Current <70mA
Wireless Protocol Zigbee3.0 / 2.4G Wi-Fi (Optional)
Detection Angle >120°
Stationary Detection Range 0-600cm
Moving Detection Range 0-1000cm
Illuminance Value 0-3000Lux
Operating Temperature -20°C ~ 70°C
Operating Humidity 0% ~ 95% RH
Dimensions (Diameter x Height) 61mm x 39mm
Mounting Depth 36mm
Recommended Opening Diameter Ø 51-57mm
Certifications CE, FCC, RoHS, UL
Product dimensions and specifications diagram
Figure 3: Detailed product dimensions and specifications.

5. Setup

5.1 Installation

The sensor can be installed in a ceiling or on a wall. Always ensure power is off before beginning installation.

5.1.1 Wiring

Connect the Live (L) and Neutral (N) wires from your power supply to the corresponding terminals on the sensor. Refer to the diagram below for correct wiring.

Sensor wiring terminals L and N
Figure 4: Close-up of sensor wiring terminals (L and N) and reset button.

5.1.2 Ceiling Installation

  1. Cut a circular hole in the ceiling with a diameter of Ø 51-57mm.
  2. Connect the power wires to the sensor's L and N terminals.
  3. Push the spring clips on the sensor upwards and insert the sensor into the ceiling hole.
  4. Release the clips to secure the sensor in place.
  5. Adjust the radar sensing surface angle to align with the desired detection area.
ZigBee Ceiling Mount sensor with power input AC85-265V
Figure 5: Side view of the sensor, illustrating its ceiling mount design.

5.1.3 Wall Installation

For wall installation, you can use double-sided adhesive or a mounting bracket (if provided) to fix the product on the wall. Adjust the radar sensing surface angle to align with the desired detection area.

5.2 App & Pairing

This sensor requires a Tuya ZigBee gateway (hub) for ZigBee versions. For Wi-Fi versions, direct connection to your 2.4G Wi-Fi network is typically supported.

  1. Download the App: Download the 'Tuya Smart' or 'Smart Life' app from your smartphone's app store.
  2. Power On: Power on the device. The indicator light should flash rapidly, indicating it's in pairing mode. If not, long-press the reset button (refer to Figure 4) until the light flashes rapidly.
  3. Add Device (ZigBee Version): Open the Tuya Smart app, ensure your ZigBee gateway is online, and put the ZigBee gateway into device discovery mode. The app will automatically detect the sensor.
  4. Add Device (Wi-Fi Version): Open the Tuya Smart app, select 'Add Device', then 'Sensor' -> 'Presence Sensor (Wi-Fi)'. Follow the in-app instructions to connect to your 2.4G Wi-Fi network.
  5. Confirm Pairing: Once successfully paired, the indicator light will stop flashing, and the device will appear in your app.
Tuya Smart App screenshots for control and settings
Figure 6: Screenshots of the Tuya Smart App interface for sensor control and settings.

6. Operating Instructions

6.1 Detection Capabilities

The 24G MmWave Radar sensor offers highly accurate detection:

  • Human Presence Detection: Detects the presence or absence of people in the monitored area.
  • Human Static Detection: Capable of detecting static states, such as a person sleeping or sitting still.
  • Human Micro Motion Detection: Identifies subtle movements like talking, blinking, or slight shifts in position.
  • Human Movement Motion Detection: Detects larger movements within the specified range.
Mmwave Radar Detection for human motion and static presence
Figure 7: Illustration of Mmwave Radar Detection for both human motion and static presence.
Micro-motion detection examples: talking, blinking, moving, sleeping
Figure 8: Examples of micro-motion detection, including talking, blinking, moving, and sleeping.

6.2 App Settings and Smart Linkage

Utilize the Tuya Smart app to customize sensor behavior and integrate with other smart devices:

  • Presence Keep Time: Adjust how long the sensor maintains a 'presence detected' state after motion ceases.
  • Indicator Status: Toggle the sensor's LED indicator on or off.
  • Radar Parameters: Fine-tune detection sensitivity and distance for both stationary and moving targets. This allows you to set minimum and maximum detection distances for your target alarm zone.
  • Motion False Detection: Configure settings to minimize false alarms.
  • Illuminance Monitoring: The sensor includes an illuminance monitor (0-3000Lux). Use this feature to create smart scenes, such as automatically turning lights ON/OFF based on ambient brightness.
App interface for setting detection distance and sensitivity
Figure 9: App interface for setting detection distance and sensitivity.
App interface showing smart light linkage with illuminance monitor
Figure 10: App interface demonstrating smart light linkage based on illuminance monitoring.

6.3 24G vs 5.8G Radar

The 24G radar offers higher sensitivity and more accurate departure delay times compared to 5.8G radars. For instance, if a departure delay is set to 30 seconds, the 24G version will typically register as 'unmanned' within 30-33 seconds, whereas a 5.8G version might take 35-38 seconds. The theoretical recognition accuracy of the 24G version is superior.

7. Maintenance

  • Cleaning: Gently wipe the sensor's surface with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Firmware Updates: Periodically check the Tuya Smart app for available firmware updates to ensure your sensor has the latest features and performance improvements.

8. Troubleshooting

  • Sensor not detecting presence:
    • Check power connection.
    • Ensure the sensor is correctly paired with the gateway/Wi-Fi.
    • Adjust detection sensitivity and range settings in the app.
    • Verify there are no obstructions blocking the sensor's field of view.
  • False detections:
    • Reduce detection sensitivity in the app.
    • Ensure the sensor is not pointing at moving objects like curtains or pets if not desired.
    • Carefully adjust the settings (sensitivity, distance) through trial and error to suit the specific room environment.
  • Connectivity issues:
    • For ZigBee: Ensure the ZigBee gateway is online and within range.
    • For Wi-Fi: Ensure your Wi-Fi network is 2.4GHz and stable.
    • Try resetting the sensor by long-pressing the reset button and re-pairing.

9. User Tips

  • Home Assistant Integration: Users have reported easy setup with Home Assistant and Zigbee2MQTT, with all entities (presence, motion state, target distance, illuminance, link quality) exposed correctly.
  • Fine-tuning Settings: The sensor's settings, especially sensitivity and distance, may require careful adjustment through trial and error to optimize performance for your specific room layout and avoid false positives/negatives.
  • Automation Potential: The ability to distinguish between different motion states (large/small, near/far) and expose target distance offers interesting possibilities for advanced home automation routines.
  • Ceiling Hole Size: Note that the required ceiling hole (Ø 51-57mm) is typically smaller than standard recessed spotlights.

10. Warranty and Support

This product is certified with CE, FCC, RoHS, and UL standards, ensuring its quality and safety. For detailed warranty information and technical support, please refer to the official product page or contact the seller directly.

A comprehensive user manual in PDF format is available for download: View PDF User Manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.