Areyourshop LR014587

Contents

Instruction Manual for Automotive Ride Height Sensor

Model: LR014587

1. Product Overview

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Areyourshop Rear Ride Height Level Sensor, model LR014587.

1.1 Core Product Definition

This automotive ride height sensor is a high-precision electronic sensing component, also known as a vehicle height sensor or suspension height sensor. It monitors and feeds back real-time height data of the vehicle body and suspension system to the vehicle ECU. This data is used to control the vehicle suspension system, headlight height adjustment system, and body stability system for automatic adjustments, ensuring driving stability, comfort, and safety.

1.2 Premium Material & Craftsmanship

The sensor shell is made of high-strength, waterproof, and dustproof ABS engineering plastic, offering excellent impact resistance, corrosion resistance, and resistance to high and low temperatures. The internal core features a high-sensitivity induction chip and a precision mechanical transmission structure, ensuring stable signal transmission, high measurement accuracy, and strong anti-interference ability. The wiring harness and connector are made from wear-resistant, anti-aging materials for a tight and secure connection.

1.3 Performance Advantages

Designed and produced in strict accordance with OEM standards, this sensor offers perfect dimensional matching and high fitting accuracy. It provides fast induction response and real-time, accurate data feedback. Key advantages include excellent durability, long service life, strong adaptability to complex road conditions and harsh environments, effectively resolving issues such as abnormal body height and inaccurate headlight adjustment.

1.4 Application Scope

This sensor is suitable for most passenger cars, SUVs, and commercial vehicles equipped with electronic suspension systems, automatic headlight height adjustment systems, and body stability control systems. It is primarily used for replacement and maintenance of damaged, faulty, or aging original ride height sensors, playing a crucial role in maintaining the normal operation of the vehicle's electronic control suspension and lighting system.

1.5 Product Benefits

As a direct-fit replacement part, it requires no modification, cutting, or secondary processing, allowing for quick and convenient installation. It effectively restores the normal operation of the vehicle's height control system, enhancing driving comfort and safety, reducing vehicle wear, and offering high cost performance with stable quality.

1.6 Compliance Marking

This product is marked with the CE Mark, indicating compliance with EU automotive electronic components, EMC electromagnetic compatibility, RoHS environmental protection, and relevant quality and safety directives, fully meeting EU market access and legal sales requirements.

2. Safety Information & Warnings

⚠️ Warning: Electric Shock & Vehicle Control Failure Risk - Improper Installation/Use May Cause Personal Injury or Traffic Accidents

  • Before Installation/Maintenance: TURN OFF THE ENGINE COMPLETELY, disconnect the negative battery terminal, and wait for 15-20 minutes to release residual circuit voltage. Live operation is strictly prohibited to avoid electric shock, short circuit, damage to the vehicle electronic control system, and potential vehicle control failure.
  • Vehicle State: Do not install, disassemble, or adjust the sensor while the vehicle is running or the suspension is under pressure. The vehicle must be parked on a flat, stable ground, and the suspension must be in a natural unloading state to prevent personal injury from vehicle sliding or suspension bounce.
  • Unauthorized Modification: Do not disassemble, modify, open, or repair the sensor body and internal components without professional guidance. Unauthorized actions will destroy the sensor's sealing and sensing accuracy, invalidate the warranty, and may cause system failure and safety hazards.
  • Wiring Protection: Protect the sensor wiring harness and connector from damage, squeezing, cutting, or water immersion. Damaged wiring can cause signal abnormality, short circuits, or fire, affecting the normal operation of the vehicle suspension and lighting system.
  • Environmental Limits: Do not use the sensor in harsh environments beyond its design parameters for extended periods (e.g., excessive temperature, severe humidity, contact with corrosive substances), as this will accelerate sensor aging and failure.
  • Professional Installation: Professional installation is strongly recommended. Non-professional operation may lead to incorrect installation, wrong wiring, inaccurate sensing data, resulting in abnormal suspension adjustment, headlight deviation, and other faults, immediately voiding the warranty.
  • Post-Installation Calibration: After installation, the vehicle suspension and headlight system must be calibrated and matched with professional diagnostic equipment. Failure to calibrate will cause system malfunction and affect driving safety.

3. Setup & Installation Instructions

3.1 Pre-Installation Preparation

  1. Park the vehicle on a flat, stable ground, turn off the engine, engage the parking brake, and disconnect the negative battery terminal. Clean the installation area of the original height sensor to remove dust, oil, and impurities.
  2. Prepare professional tools: socket wrench, screwdriver, professional vehicle diagnostic equipment, clean lint-free cloths, and personal protective equipment. Avoid using sharp tools that could damage the sensor shell and wiring harness.
  3. Inspect the new height sensor carefully: check for intact appearance (no cracks, deformation, or damage), confirm the model, interface, mounting bracket, and stroke match the original part, and verify the CE marking is clear and complete.
  4. Mark the installation position and wiring connection mode of the original sensor to ensure accurate reinstallation and avoid wrong connection or deviation.

3.2 Removal of Old Height Sensor

  1. Gently disconnect the wiring harness connector of the old height sensor by pressing the connector buckle. Do not pull the wiring harness forcibly to avoid damage.
  2. Loosen and remove the fixing bolts and connecting rod nuts of the old sensor. Take out the faulty or aging sensor from the vehicle body or suspension mounting position, and check the wear condition of the connecting rod and bushing.
  3. Clean the sensor mounting base and connecting rod thread, remove rust and impurities, ensuring the mounting surface is flat and clean for subsequent installation.

3.3 Installation of New Height Sensor

  1. Install the new height sensor to the original marked mounting position, fix it with matching bolts, and tighten the bolts evenly to the specified torque to ensure firm installation without skew.
  2. Connect the sensor connecting rod to the suspension swing arm or vehicle body bracket. Tighten the connecting nut, ensuring the connecting rod moves flexibly without jamming or deviation, and keep the sensor in a natural induction state.
  3. Connect the sensor wiring harness connector to the original vehicle interface correctly. Press the buckle tightly to ensure a firm connection with no looseness or poor contact. Arrange the wiring harness neatly to avoid friction with moving parts.

4. Operating Instructions

4.1 Post-Installation Calibration & Test

  1. Reconnect the negative battery terminal, turn on the vehicle ignition switch, and use professional vehicle diagnostic equipment to clear original fault codes. Calibrate the height sensor and related systems (suspension, headlights) according to OEM standard steps.
  2. Start the engine and run the vehicle at idle speed for 5-10 minutes. Observe the vehicle body height state and check whether the suspension and headlight adjustment system work normally.
  3. Conduct a low-speed road test. Check vehicle driving stability, suspension adjustment effect, and headlight illumination angle. Confirm no abnormal alarm, signal abnormality, or other faults. The vehicle can be used normally only after all indicators are normal.

5. Maintenance & Usage Guidelines

5.1 Routine Maintenance

During routine vehicle maintenance, regularly check the sensor's fixing condition, wiring harness wear, and signal feedback status. Replace the sensor promptly if any looseness, damage, or signal abnormality is found. After replacing the sensor, professional calibration must be carried out to ensure the normal operation of the vehicle's relevant control systems.

5.2 Usage Restrictions

  • This sensor is ONLY suitable for specific vehicle models with matching electronic suspension or headlight adjustment systems (e.g., Land Rover Range Rover Sport I L320 2005-2013, Right-hand drive). Do not install on mismatched, modified vehicles, or models without relevant electronic control systems.
  • Do not use the sensor in vehicles with faulty suspension systems, damaged connecting rods, or abnormal vehicle body control modules; faulty associated components will cause sensor signal distortion and premature failure.
  • The product is suitable only for normal road driving conditions. Long-term use under extreme conditions (vehicle overload, severe bumpy roads, deep water wading, high-temperature baking) will accelerate sensor damage and affect service life.
  • Do not mix the new sensor with old, damaged connecting rods, bushings, or wiring harnesses; mismatched accessories will lead to inaccurate sensing and system malfunction.
  • Do not use corrosive cleaning agents to clean the sensor, and do not paint or wrap the sensor shell, as this will affect its heat dissipation and sensing accuracy.
  • This sensor is a special electronic component for automobiles and should not be used for other mechanical equipment or non-standard vehicle modification purposes.

6. Troubleshooting

Fault PhenomenonPossible CausesTroubleshooting Solutions
Vehicle fault light on, suspension/headlight system abnormalSensor wrong installation, wiring loose, signal error, no calibrationReinstall sensor correctly, fasten wiring, calibrate with diagnostic tool
Inaccurate body height, uneven suspensionSensor position deviation, connecting rod jam, internal sensing faultAdjust sensor position, check connecting rod, replace faulty sensor
Headlight height deviation, poor illuminationSensor signal distortion, calibration failure, matching errorRecalibrate headlight system, check sensor connection, replace sensor
Sensor no signal, complete system failureWiring open circuit/short circuit, connector damage, sensor burnoutCheck wiring harness, replace connector, replace height sensor

7. Specifications

AttributeDetail
Model NameLR014587 (OEM: LR014587, LR023650)
Manufacturer Part NumberLR014587
TypeRide Height Level Sensor
MaterialABS Plastic
ColorBlack
Number of Pins6-pin
Placement on VehicleRear, Left, Right (Right-hand drive specific)
OriginMainland China
Package Dimensions (L x W x H)18 cm x 10 cm x 7 cm
Package Weight0.15 kg

7.1 Compatibility

This sensor is a direct replacement part for Land Rover Range Rover Sport I L320 models from 2005-2013. Before purchase and installation, carefully confirm that the model, pin definition, mounting size, induction stroke, and applicable system of this height sensor are completely consistent with the original vehicle parts. Refer to your vehicle's OEM maintenance manual for detailed compatibility data. This product is not compatible with vehicles without electronic suspension, manual headlight adjustment, or pure mechanical suspension systems.

8. User Tips

  • Always prioritize safety: Ensure the vehicle is off, cool, and stable before beginning any installation or maintenance.
  • Professional installation is highly recommended to ensure correct fitment and calibration, which is crucial for optimal performance and safety.
  • After installation, proper calibration with diagnostic equipment is essential for the sensor and related systems to function correctly.

9. Compliance Statement

This automotive ride height sensor is marked with the CE Mark, complying with EU Low Voltage Directive (LVD), Restriction of Hazardous Substances (RoHS) Directive, EMC Electromagnetic Compatibility Directive, and relevant automotive electronic component quality and safety standards. It does not contain hazardous restricted substances, meets EU market access requirements, and can be legally sold and used in EU member states.

10. Warranty & Support

10.1 After-Sales Guarantee

The product supports free return and exchange within 7 days of receipt for non-human-caused quality defects (unopened, intact appearance, no installation damage). The warranty covers factory manufacturing defects. Damages caused by improper installation, wrong wiring, no calibration, misuse, water ingress, collision, or normal wear are not covered by the warranty.

10.2 Disclaimer

The seller shall not be liable for vehicle control failure, traffic accidents, personal injury, or indirect losses (such as vehicle downtime, towing fees, maintenance costs) caused by non-compliant use, improper installation, failure to calibrate, model mismatch, or failure to follow safety warnings. This manual is a universal guide; for model-specific details, always refer to the vehicle's official OEM service manual.

For further detailed instructions and diagrams, please refer to the official PDF user manual available for download.

Areyourshop Rear Ride Height Level Sensor LR014587 with a Range Rover Sport in the background

Figure 1: Areyourshop Rear Ride Height Level Sensor LR014587

Close-up view of the 6-pin connector on the height level sensor

Figure 2: Sensor 6-pin Connector Detail

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.