Important Safety Information
DANGER: Failure to follow instructions may result in death or serious injury.
WARNING: Failure to follow instructions could result in death or serious injury.
CAUTION: Failure to follow instructions could cause personal injury or physical damage to equipment and surroundings.
- This manual is intended for professional bicycle mechanics. If you are not professionally trained, consult your place of purchase or a local bicycle dealer for assistance.
- Always use genuine SHIMANO replacement parts. Loose, worn, or damaged parts can cause serious injury.
- Wear safety glasses or goggles when performing maintenance tasks.
- Do not disassemble or modify the product unless explicitly stated in this manual.
For a complete dealer's manual, refer to the official SHIMANO documentation (DM-GN0001-30) available online at https://si.shimano.com.
Product Overview
The SHIMANO TOURNEY RD-TZ31 is a mechanical rear derailleur designed for reliable 6-speed and 7-speed bicycle drivetrains. It is suitable for mountain bikes, trekking bikes, and commuter bikes, offering smooth SIS (Shimano Index System) shifting performance.
This derailleur is available in two main mounting types: Hook type and Eyelet type, to accommodate various bicycle frames.
Image: SHIMANO TZ31 Eye Rear Derailleur.
Image: SHIMANO TZ31 Hook Rear Derailleur.
Specifications
| Feature | Detail |
|---|---|
| Brand | SHIMANO |
| Model Number | RD-TZ31 |
| Derailleur Groupset Type | Mechanical Derailleur system |
| Type | Rear Derailleur |
| Components | Derailleurs |
| Material | Steel + Aluminum Alloy |
| Origin | Mainland China |
| Compatibility | 6-speed, 7-speed (18/21-speed systems) |
| Max Flywheel | 28T (Total capacity 34T) |
| Mount Options | Eyelet/Hanger (for aluminum/steel frames) |
| Package Dimensions (L x W x H) | 14 cm x 11 cm x 7 cm |
| Package Weight | 0.271 kg |
Setup and Installation
Proper installation is crucial for optimal performance and safety. Refer to the detailed diagrams in the official SHIMANO Dealer's Manual (DM-GN0001-30) for visual guidance.
1. Installing the Rear Derailleur
The RD-TZ31 can be installed as a standard type (direct mount to dropout) or bracket type (using a separate bracket).
Standard Type (MTB/Trekking)
- Position the derailleur on the dropout.
- Use a 5 mm hexagon wrench to tighten the mounting bolt.
- Tightening Torque: 8-10 N-m.
- Notice: Periodically check that there is no gap between the derailleur hanger and the bracket. A gap can impair shifting performance.
Image: Diagram illustrating the installation of a standard type rear derailleur to the bicycle's dropout.
Bracket Type (MTB/Trekking)
- Attach the bracket to the frame.
- Position the derailleur onto the bracket.
- Use a suitable wrench to tighten the bracket bolt.
- Tightening Torque: 3-4 N-m.
- Notice: Ensure no gap exists between the derailleur hanger and the bracket.
2. Stroke Adjustment (Limit Screws)
Adjust the H (High) and L (Low) limit screws to prevent the chain from derailing off the smallest or largest sprocket.
Top Adjustment (H-screw)
- Shift the chain to the smallest sprocket.
- Turn the top adjustment bolt (H) so that the guide pulley is in line with the outer line of the smallest sprocket when viewed from the rear.
Image: Diagram for adjusting the top limit screw (H) to align the guide pulley with the smallest sprocket.
Low Adjustment (L-screw)
- Shift the chain to the largest sprocket.
- Turn the low adjustment bolt (L) so that the guide pulley moves to a position directly in line with the largest sprocket.
Image: Diagram for adjusting the low limit screw (L) to align the guide pulley with the largest sprocket.
3. Chain Length Determination
Correct chain length is essential for proper shifting and to prevent damage.
- Mount the chain onto the largest sprocket and the largest chainring.
- Add 2 links to this length to set the final chain length.
- For bikes with significant rear suspension movement, ensure the chain length accommodates the greatest extension of the rear suspension.
Image: Diagram illustrating how to determine the correct chain length by wrapping it around the largest chainring and largest sprocket, then adding two links.
4. Securing the Cable
- Cutting the Outer Casing: Cut the outer casing to the appropriate length, ensuring the end is round and the inner hole has a uniform diameter. Attach a sealed outer cap to the cut end.
- Installing Outer Cap: Install the sealed outer cap with tongue and the rubber shield onto the outer casing stopper of the frame.
- Connecting Inner Cable: Connect the inner cable to the rear derailleur's groove.
- Removing Slack: Remove any initial slack from the cable.
- Reconnecting and Tightening: Reconnect the inner cable and tighten the bolt. Tightening Torque: 6-7 N-m. Ensure the cable is securely in the groove.
- Inner Cable Margin: Set the inner cable so that the margin is approximately 30 mm or less, then install the shift inner cap.
Image: Diagram showing the proper routing and connection of the inner cable to the rear derailleur.
5. SIS Adjustment (Indexing)
The SIS (Shimano Index System) adjustment ensures precise gear changes.
- Confirming Positioning: Operate the shifting lever several times to move the chain to the 2nd sprocket (counting from the smallest). While operating the lever just enough to close the gap, turn the crank arm. The ideal setting is when the chain touches the 3rd sprocket and makes noise.
- Adjusting when chain shifts to 3rd sprocket: Tighten the cable adjustment barrel (clockwise) until the chain returns to the 2nd sprocket and the noise stops.
- Adjusting when no sound: Loosen the cable adjustment barrel (counter-clockwise) until the chain touches the 3rd sprocket and makes noise. Then, tighten the barrel clockwise slightly until the noise stops and the chain runs smoothly.
- Operate the lever to change gears and confirm no noise occurs in any gear position.
Image: Close-up of the cable adjustment barrel, used for fine-tuning SIS indexing.
6. B-Tension Adjustment
The B-tension adjust bolt controls the distance between the guide pulley and the sprockets.
- Mount the chain on the smallest chainring and the largest sprocket.
- Adjust the B-tension adjust bolt so that the guide pulley does not interfere with the sprocket, but also not so close that it touches the chain.
- Repeat the process with the chain on the smallest sprocket to ensure no contact.
| Gear Combination | Distance (A) |
|---|---|
| 11-42T | 5-6 mm |
| 11-36T | 5-6 mm |
| 11-34T | 5-6 mm |
| 11-32T | 9-10 mm |
Table: Recommended distance between the largest sprocket and the guide pulley for various gear combinations.
Operating Instructions
The SHIMANO TOURNEY RD-TZ31 operates as part of a mechanical derailleur system. Use your bicycle's shift levers to change gears. Ensure smooth operation by following maintenance guidelines.
- Shift gears smoothly and avoid excessive force on the shift levers.
- Listen for abnormal noises during shifting; this may indicate a need for adjustment or maintenance.
- If shifting feels stiff, check the inner cable and outer casing for proper lubrication and routing.
Maintenance
Regular maintenance extends the life and performance of your derailleur.
Cleaning and Lubrication
- Periodically clean the derailleur and lubricate all moving parts (mechanism and pulleys).
- Clean the gears and chain with a neutral detergent. Lubricating the chain after cleaning is highly recommended.
- Use a special grease for the gear shifting cable. Do not use premium grease or other types of grease, as they may cause deterioration in gear shifting performance.
- For maximum performance, SHIMANO lubricants and maintenance products are recommended.
Replacing Pulleys
If you hear abnormal noise from a pulley or if they are worn, they should be replaced.
Guide Pulley Replacement
- Use a 3 mm hexagon wrench to remove the guide pulley.
- Install the new guide pulley, ensuring the arrow direction on the pulley is correct.
- Tightening Torque: 2.5-5 N-m.
Image: Diagram illustrating the removal and installation of the guide pulley.
Tension Pulley Replacement
- If an E-ring is attached, remove it first.
- Use a 3 mm hexagon wrench to remove the tension pulley.
- Install the new tension pulley, ensuring the arrow direction on the pulley is correct.
- Tightening Torque: 2.5-5 N-m.
Image: Diagram illustrating the removal and installation of the tension pulley.
Troubleshooting
- Chain comes off: Check if the stroke adjustments (H and L screws) are set correctly. Ensure chain length is appropriate.
- Poor shifting performance:
- Clean and lubricate the derailleur and chain.
- Check for excessive looseness in the derailleur links; if severe, replace the derailleur.
- Ensure the inner cable is lubricated and the outer casing is not too long or short.
- Check the parallelism of the derailleur hanger at the rear end of the bicycle.
- If using a SHADOW RD, ensure the B-tension adjust bolt is correctly set.
- Abnormal noise:
- If noise occurs during shifting, perform SIS adjustment.
- If noise is from a pulley, replace the pulley.
- If chain and sprocket contact causes noise, shift to the next largest sprocket.
- Stiff lever operation / Impaired SIS function: Check the condition of the inner cable and the bending of the outer casing. High cable resistance (e.g., internal cable routing) can affect performance.
- Incorrect tightening: If bolts are tightened incorrectly, it can deform tool holes or lead to suboptimal gear shifting. Always use specified torque values.
User Tips
- Frame Compatibility: Always check your bicycle frame's mount type (hook or eyelet) before purchasing to ensure compatibility.
- Older Bikes: This derailleur is a reliable choice for bringing older bikes with friction shifters back into service.
- Large Sprockets: If you plan to use a very large rear sprocket (e.g., beyond 28T), an extension cable for the derailleur might be necessary to ensure proper chain wrap and shifting.
- Durability: While the pulleys may be plastic, the overall design is simple and sturdy, contributing to its longevity when properly maintained.
- Authenticity: Ensure you purchase authentic Shimano products for guaranteed quality and performance.
Warranty and Support
Products are not guaranteed against natural wear and deterioration from normal use and aging.
For technical support, detailed diagrams, or hard copies of user manuals, please contact a SHIMANO distributor or any of the SHIMANO offices. You can also find comprehensive technical documentation online at https://si.shimano.com.
SHIMANO INC.
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
SHIMANO NORTH AMERICA BICYCLE, INC.
One Holland, Irvine, California 92618, U.S.A.
Phone: +1-949-951-5003
SHIMANO EUROPE B.V.
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands
Phone: +31-402-612222
EU General Contact: contactshimano@shimano-eu.com