Bonacell RH-5188 Wireless Controller Instruction Manual

1. Introduction

Thank you for choosing the Bonacell RH-5188 Wireless Controller. This manual provides detailed instructions for proper use, setup, and maintenance of your controller. Please read it carefully and keep it in a safe place for future reference.

The RH-5188 controller is designed for an ultimate gaming experience, featuring advanced functionalities like Hall Effect joysticks, dual motor vibration, RGB lighting, and programmable back buttons. It offers broad compatibility with PlayStation 5 (PS5, PS5 Pro, PS5 Slim) and PC.

2. Safety Precautions

• Do not store this product in a humid or high-temperature environment.
• Avoid knocking, beating, sticking, piercing, or attempting to disassemble the product to prevent unnecessary damage.
• Prevent water or other liquids from entering the Gamepad, as this may affect its function.
• Do not charge the Gamepad near fire or other heat sources.
• Do not place heavy objects on this product.
• Do not touch the port with your hands, and do not insert foreign objects into the port.
• Non-professionals should not disassemble this product; otherwise, it will not be covered by the after-sale warranty.
• Children should use this product under the supervision of an adult.

3. Product Overview (Gamepad Concept)

Familiarize yourself with the layout and functions of your Bonacell RH-5188 Wireless Controller.

• R1/L1: Shoulder buttons.
• R2/L2: Trigger buttons.
• Touchpad: Interactive surface.
• SHARE Button: For sharing content.
• OPTIONS Button: For in-game menus and options.
• Cross Key (D-pad): Directional input.
• Action Buttons (X, O, Square, Triangle): Primary action buttons.
• L3/Left Stick: Left analog stick, also functions as a button when pressed.
• R3/Right Stick: Right analog stick, also functions as a button when pressed.
• TURBO Button: Activates turbo function.
• LIGHT Button: Controls RGB lighting.
• Home Button: PS button for console functions.
• 3.5mm Headphone Jack: For audio output.
• PR/PL Buttons: Programmable back buttons (refer to image on page 1).

4. Setup

4.1. PS5 Host Connection Method

Note: The first time a new controller connects to PS5, a wired connection is required.

1. When the controller is turned off, connect it to the PS5 via a USB cable.
2. Press the "PS button" on the controller to connect to the PS5.

3. Once the wired connection is successful, disconnect the USB cable.
4. Press the "PS button" again to connect to the PS5 wirelessly.

4.2. PC Wired Connection

1. Power on your PC.
2. Connect the controller to your computer via a USB-C cable. The controller should be recognized automatically.

4.3. Bluetooth Connection - PC

1. Turn on Bluetooth on your PC.
2. First, press and hold the SHARE key, then press the PS key combination (SHARE + PS). Press and hold for 3 seconds until the indicator light flashes, indicating the controller is in pairing state. Then release the buttons.
3. Search for Bluetooth device "DualSenes Wireless Controller" on your PC and click to connect.

5. Operating Instructions

5.1. MACRO Programming Function

The macro programming function allows you to record a sequence of up to 24 key values (button presses and releases).

1. Press and hold the SET key for 3 seconds. The P indicator light will flash slowly, and the motor will vibrate, indicating macro recording mode.
2. Press any function key (Cross Key directions, X, O, Square, Triangle, L1, L2, L3, R1, R2, R3) to record the key presses and releases.
3. After recording, press any PL/PR key. The motor will vibrate, and the P indicator will stay on, confirming successful button programming.

5.2. Clear Macro Programming Function

1. Press and hold the SET button for 5 seconds. The indicator light will flash slowly, and the motor will vibrate.
2. Press the PL/PR button. The indicator light will stay on, the macro setting will be canceled, and the motor will vibrate.

5.3. Turbo Function

The Turbo function allows for rapid-fire input of a button.

1. Long press any function key (X, O, Square, Triangle, LB, LT, RB, RT) you wish to apply Turbo to.
2. While holding the function key, simultaneously press the TURBO button. The function key will now have Turbo enabled.
3. To turn off the Turbo function for a specific key, repeat the steps above.

5.4. RGB Lights

The controller features customizable RGB lighting.

1. Press the "Light" button to switch between different lighting colors and modes.
2. Available colors and modes include: colorful transformation, single color cycle, solid red, solid blue, solid green, solid pink, solid orange, solid cyan, and solid purple.
3. Long press the "Light" button for 3 seconds to turn the RGB lighting (including button lights) on or off.

5.5. Trigger and 3D Joystick Calibration

To ensure optimal performance, you can calibrate the triggers and joysticks.

1. Hold the SHARE and OPTIONS buttons simultaneously.
2. While holding these buttons, connect the controller to a power source using the USB cable. The Home button will flash quickly.
3. Press the L2/R2 triggers 2-3 times.
4. Rotate both 3D joysticks 2-3 full circles each.
5. Long press the X key for 1 second to confirm. The Home key will stay on, indicating successful calibration.
6. Power off the controller to save the calibration settings.

6. Specifications

7. Troubleshooting

• Why is the controller not recognized on smart Android TV?
  1. Confirm whether the smart Android TV USB interface is working properly.
  2. The power supply of the smart Android TV may be insufficient, resulting in unstable USB voltage.
  3. Try unplugging the smart Android TV USB port and using another USB port.
• Why can't the controller be used in the game?
  1. The game itself may not support controller peripherals.
  2. You may need to configure the Gamepad settings within the game before use.
• Why can't the Gamepad vibrate?
  1. The game itself may not support vibration.
  2. The vibration function might not be turned on in the game settings.

8. User Tips

• Upon receiving your new controller, ensure it is fully charged before its first use to guarantee optimal performance.
• While the controller is compatible with PS5, it is not an official Sony product.
• This controller is designed for PS5 and PC. It is not compatible with Nintendo Switch.

9. Warranty and Support

For technical support and warranty services, please refer to the information below or scan the QR code provided on the original manual.

Manufacturer: Huizhou Rong Hui Technology Co.,Ltd

Address: Dazhou No.1 Industrial Zone, Liboshui Village, Shiwan Town, Boluo County

Email: euservice168@outlook.com

CE Representative: Apex CE Specialists GmbH

CE Rep Address: Grafenberger Allee 277, 40237 Dusseldorf Westfalen DE

CE Rep Email: info@apex-ce.de

Please retain your purchase receipt and product number for warranty claims.

A detailed user manual in PDF format is available for download: User Manual (PDF)