1. Introduction
Thank you for choosing the MCHOSE G98 V2 Pro Mechanical Keyboard. This keyboard is designed for both esports and office use, featuring tri-mode connectivity (2.4G Wireless, Bluetooth, Wired), a customizable layout, hot-swappable switches, and vibrant RGB lighting. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your keyboard to ensure a seamless user experience.
Image: Overview of the MCHOSE G98 V2 Pro Mechanical Keyboard, highlighting its customizable nature and key features.
2. Setup
2.1. Unboxing and Initial Inspection
Carefully remove the keyboard and all accessories from the packaging. Verify that all components are present:
- 1 x MCHOSE G98 V2 Pro Mechanical Keyboard
- 1 x User Manual & Certificate
- 1 x Keycap/Switch Puller
- 2 x Spare Switches
- 1 x Dust Cover
- 1 x Data Cable (Type-C)
2.2. Connecting Your Keyboard
The MCHOSE G98 V2 Pro supports three connection modes: 2.4G Wireless, Bluetooth, and Wired.
Image: Detailed view of the keyboard's one-touch switch for connectivity modes and indicator lights.
2.2.1. 2.4G Wireless Mode
- Locate the mode switch on the keyboard and set it to the '2.4G' position.
- Remove the 2.4G receiver (dongle) from its storage slot on the keyboard.
- Insert the 2.4G receiver into an available USB port on your computer.
- For manual pairing (if not automatically connected or for factory reset): Press
FN + 5. The indicator light will flash rapidly. Once the receiver is inserted and connected successfully, the indicator light will illuminate for 2 seconds.
2.2.2. Bluetooth Wireless Mode
- Locate the mode switch on the keyboard and set it to the 'BT' position.
- Press and hold
FN + 1,FN + 2, orFN + 3to enter pairing mode. The indicator light for the selected channel will flash rapidly. - On your device (computer, tablet, smartphone), search for Bluetooth devices and select "MCHOSE G98 V2 Pro" (or similar name).
- Once paired, the indicator light will stop flashing and remain solid for 2 seconds.
- You can switch between up to three paired Bluetooth devices by pressing
FN + 1,FN + 2, orFN + 3.
2.2.3. Wired Mode
- Locate the mode switch on the keyboard and set it to the 'OFF' position.
- Connect the provided Type-C data cable to the Type-C port on the keyboard.
- Connect the other end of the data cable to an available USB port on your computer.
- The keyboard will be automatically recognized and ready for use.
2.3. Driver Installation (M HUB)
For advanced customization and features, install the M HUB driver software.
2.3.1. Web Version
- Open your web browser and navigate to: https://www.mchose.com.cn
- Click on "Enter M HUB WEB" and allow browser access.
- Select your product model to connect and customize settings.
2.3.2. Client Version
- Open your web browser and navigate to: https://www.maicong.cn
- Click on "Driver" and then "Download M HUB Client" to install the desktop application.
Image: Screenshot of the M HUB driver interface, showing customization options for MCHOSE peripherals.
3. Operating Instructions
3.1. FN Combination Keys
The keyboard features various functions accessible via the FN key combinations:
| Combination | Function |
|---|---|
FN + ESC (Long Press 3-5s) | Restore default settings |
FN + \ | Switch lighting mode |
FN + TAB | Switch lighting color |
FN + ↑ | Increase lighting brightness |
FN + ↓ | Decrease lighting brightness |
FN + ← | Decrease lighting speed |
FN + → | Increase lighting speed |
FN + Right Shift | Switch ambient light strip mode |
FN + ? | Switch ambient light strip color |
FN + B | Switch ambient light strip to battery level mode |
FN + Right Alt | Cycle ambient light strip brightness |
FN + Right Ctrl | Cycle ambient light strip speed |
FN + Win | Lock/Unlock Windows key |
FN + F1-F12 | Multimedia functions (e.g., volume, media control) |
Image: The keyboard showcasing its customizable RGB lighting effects.
3.2. Smart One-Key Calculator
The keyboard features a dedicated key to instantly open the calculator application on your computer, enhancing productivity.
Image: Diagram illustrating the smart one-key calculator function, showing the dedicated key and its action.
3.3. Volume Function Knob
Control your audio volume conveniently with the integrated knob:
- Swipe up: Increase volume.
- Swipe down: Decrease volume.
- Press down: Mute/unmute audio.
Image: A hand demonstrating the use of the volume function knob for adjusting audio levels.
3.4. Hot-Swappable Switches
The MCHOSE G98 V2 Pro features a hot-swappable shaft seat, allowing you to easily replace switches without soldering. This enables customization with most mechanical switches available on the market to suit your typing preference.
Image: Close-up view of the hot-swappable switch sockets on the keyboard PCB.
Image: Specifications for various switch types including Inferno Orange (Linear Shaft - TTC), Ice Blue (Linear Rail - Huan Nuo), and Cabbage Tofu Axis V2 (Linear Shaft - KTT Kangtengte), detailing trigger force, trigger stroke, actuation travel, and total travel.
3.5. Ergonomic Design
The keyboard is designed with an ergonomic "Golden Angle" and dual-stage adjustable kickstands to provide a comfortable typing experience, reducing strain during long hours of use.
Image: Side view of the keyboard illustrating its ergonomic angle and adjustable kickstand for comfortable use.
4. Maintenance
4.1. Battery Charging
The G98 V2 Pro model is equipped with a 10000mAh long-lasting battery. To charge your keyboard:
- Connect the keyboard to your computer using the provided Type-C data cable.
- The indicator light will show a flowing light effect during charging.
- Once fully charged, the indicator light will turn green.
Important Charging Precautions:
- It is recommended to charge the keyboard using a computer's USB port.
- DO NOT use fast-charging phone chargers.
- DO NOT use non-standard power adapters.
- Ensure to use power adapters with over-voltage and over-current protection.
- Avoid using the device while it is charging.
- Turn off the power switch when the keyboard will not be used for an extended period.
Image: Visual representation of the 10000mAh large capacity battery, emphasizing long-lasting power.
4.2. Cleaning
To maintain the keyboard's appearance and functionality:
- Use the provided dust cover when the keyboard is not in use.
- Gently wipe the keycaps and chassis with a soft, damp cloth.
- For deeper cleaning, use the keycap puller to remove keycaps and clean underneath with compressed air or a soft brush.
- Ensure the keyboard is powered off and disconnected before cleaning.
5. Troubleshooting
5.1. Connectivity Issues
- Keyboard not responding in 2.4G/Bluetooth mode: Ensure the mode switch is set correctly. Re-pair the device following the instructions in Section 2.2. Check battery level.
- Intermittent connection: Ensure the receiver is securely plugged in (for 2.4G). Move the keyboard closer to the receiver/device. Avoid sources of strong electromagnetic interference.
- Wired connection not working: Ensure the Type-C cable is fully inserted into both the keyboard and the computer. Try a different USB port or cable. Ensure the mode switch is in the 'OFF' position.
5.2. Lighting Issues
- RGB lights not working: Check if the lighting is turned off or brightness is set to minimum using
FNcombinations. Ensure the keyboard is powered on. - Lights stuck on one color/mode: Try resetting the keyboard to default settings by long-pressing
FN + ESCfor 3-5 seconds.
5.3. Power Issues
- Keyboard not turning on: Ensure the battery is charged. Connect via wired mode to check if it powers on.
- Rapid battery drain: Reduce RGB brightness or turn off lighting when not needed. Ensure the keyboard enters sleep mode after inactivity.
5.4. FCC Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6. Specifications
The following table outlines the key specifications for the MCHOSE G98 Series keyboards:
Image: Detailed parameter sheet for the G98 and G98 V2 series keyboards, showing differences in battery, latency, and functions.
| Feature | G98 | G98 V2 |
|---|---|---|
| Layout | 98 layout, 99 keys | 98 Layout, 100 Keys |
| Axis/Switch Type | Cabbage Tofu Axis V2 | Ice Blue Switch, Inferno Orange Switch |
| Key Functions | Hidden 2.4G Magnetic Storage, Built-in Music Rhythm 2.0 | Smart One-Tap Calculator, Volume Knob, Hidden 2.4G Magnetic Storage, Built-in Music Rhythm 2.0 |
| Battery Capacity | 8000mAh | 10000mAh |
| Lighting Technology | MCHOSESOFTLIGHT Soft Lighting Technology (~16M RGB Colors) | |
| Driver | Fully self-developed MHUB driver (client/web version) | |
| Transmission Technology | MCHOSE®TOPSPEED Wireless Transmission Technology | |
| Latency | 3ms | 1ms (Ultra-Low) |
| Keycap Material | PBT Two-Color Injection, PBT Side-Engraved | |
| Structure | GASKET structure | |
| PCB Board | 1.2mm Single Key Slotted PCB (Lower Light Position) | |
| Positioning Plate | Slotted PC positioning plate | |
| Internal Fill | Sandwich cotton + IXPE under-axe pad + PET spacer + Base cotton + Molded silicone bottom pad | |
| Connection Method | Wired/2.4G/Bluetooth | |
| Satellite Axis | McWill Customized Satellite Axis | |
| Light Bar | RGB Tri-color Lighting | |
6.1. Physical Dimensions and Weight
- Length: 45 cm
- Width: 15 cm
- Height: 5 cm
- Weight: 1.8 kg
7. User Tips
- Customization: Take advantage of the hot-swappable switches to experiment with different switch types and find your preferred typing feel.
- Productivity Boost: Utilize the dedicated one-key calculator and volume knob for quick access to essential functions, streamlining your workflow.
- Multi-Device Use: Seamlessly switch between up to three Bluetooth devices, making it ideal for users with multiple computers or mobile devices.
- Battery Management: For optimal battery life, remember to turn off the keyboard when not in use for extended periods and use the
FN + Bcombination to check battery status regularly.
8. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official user manual PDF or contact MCHOSE customer support.
The user manual in PDF format can be viewed or downloaded from the following link: MCHOSE G98 V2 Pro User Manual (PDF).