Introduction
Thank you for choosing the MICTUNING P1Y+6 Gang Switch Panel. This product is designed to provide versatile control over your vehicle's accessories with its innovative app, panel, and remote control options. This manual will guide you through the installation, operation, and maintenance of your switch panel to ensure optimal performance and a safe user experience.
For additional information and support, you may refer to the official user manual PDF: User manual (PDF)
1. Setup
1.1 Packing List
Before beginning installation, please verify that all components are present:

Image: All components included in the MICTUNING P1Y+6 Gang Switch Panel package.
- 6-Gang Switch Panel
- Control Box
- Circuit Breaker
- Antenna
- Mounting Brackets
- Wire Harness
- Adhesive Pad
- Cable Ties
- ACC Wire
- Wire
- Remote Control
- Fasteners
- Screwdriver
- Switch Labels (140 PCS)
- MICTUNING Stickers
1.2 Switch Panel Installation
The switch panel can be installed using adhesive, fixed mount, or angle adjustable mount methods.
Adhesive Mount (for 6-Gang Panel)
- Stick the adhesive pad onto the back of the switch panel.
- Peel off the other side's backing and firmly stick the panel onto the desired location in your vehicle.
Fixed Mount (for 8-Gang / 12-Gang Panel)
- Align the mounting bracket with the hole position on the switch panel.
- Tighten the flat head screws to secure the bracket to the panel.
- Mount the panel with the attached bracket to your desired location.
Angle Adjustable Mount
- Tighten the base plate screws.
- Tighten the bracket screws.
- Mount the panel to your desired location, adjusting the angle as needed.
1.3 Control Box Installation
The control box can be installed using fixed mount or middle plate mount methods.
Fixed Mount
- Align the bracket with the hole position on the control box.
- Tighten the bracket screws.
- Secure the control box with the bracket to a suitable location, typically under the hood.
Middle Plate Mount
- Align the bracket with the hole position on the control box.
- Tighten the screws.
- Secure the control box with the bracket to a suitable location, typically under the hood.
1.4 Wiring Diagram
The following diagram illustrates the wiring connections for the 6-gang switch panel. Ensure all connections are secure and correct before operation.

Image: Easy wiring diagram for the 6-gang switch panel, showing input voltage, maximum power, maximum current, operating temperature, and connections to six circuit fuse blocks.
Control Box Wiring Steps
- Connect the negative terminal of the vehicle battery to the negative terminal of the control box. Connect the positive terminal of the vehicle battery to the positive terminal of the control box.
- Connect the white connector of the ACC wire to the control box.
- Connect your lights/devices to the control box. Negative wires can be connected to the common cathode.
- Connect the switch panel to the control box using the 4-pin connector.
- Connect the antenna to the control box.
- After all wiring is completed, close the control box cover.
- Place the antenna on the right A-pillar of the car to enhance signal reception.
2. Operating Instructions
2.1 Control Methods
The MICTUNING P1Y+6 Gang Switch Panel offers three convenient ways to control your accessories:

Image: Overview of the three control methods: App Control, Panel Control, and Remote Control.
Video: Demonstrates the three control methods (App, Panel, Remote) and customization options.
2.2 Control Modes
Each button on the switch panel can be configured with one of four distinct control modes, indicated by a unique LED color:

Image: Visual representation of the four control modes and their corresponding LED colors.
- Toggle (Red): Press to turn the device on, press again to turn it off.
- Momentary (Blue): Activates the device only while the button is held pressed.
- Flash (Purple): Flashes the device at a slower speed, similar to a turning signal.
- Strobe (Green): Strobes the device like a warning light.
Setting Control Modes
- Long press the Brightness Button until the Red Backlight starts flashing to enter Control Mode Setting.
- Press any button you wish to configure. The indicator's color will switch with each press, cycling through Toggle (red), Momentary (blue), Flash (purple), and Strobe (green). Set all buttons to your desired modes.
- Press the On/Off button to exit setting. If no actions are taken within 10 seconds, the control mode setting will automatically exit.
2.3 Button Explanation
- ON/OFF Switch: With memory function, it remembers the last setting automatically.
- Brightness & Control Mode Button:
- Short Press: Adjusts 6-level brightness (0%, 20%, 40%, 60%, 80%, 100%). Each press cycles to a different brightness level.
- Long Press: Enters control mode setting.
- Lighting Mode & Color (RGB) Button:
- Short Press: Switches the button backlight color (red, orange, yellow, green, cyan, blue, purple, white).
- Long Press (2-3s): Switches the backlight effect (Gradient, Jumping, Breathing).
- Long Press (7+s): Resets to factory settings.
2.4 Remote Control Pairing
The remote control allows for wireless operation of your switch panel.

Image: The remote control offers ultra-long wireless control up to 230 ft (70 m) under unobstructed conditions.
- Long press the Control Box's pairing button until its indicator slowly flashes.
- Long press the remote's ON/OFF button.
- When the Control Box's indicator turns solid red, pairing is successful.
Note: To clear pairing, long press the Control Box's pairing button. It will first flash slowly, then quickly. Release when you see fast flashing – pairing is cleared.
One remote can pair with up to 5 panels, or 1 panel can connect to up to 5 remotes.
2.5 Control with APP
The MICTUNING App allows for advanced customization and control of your switch panel.

Image: The switch panel can be customized via the MICTUNING App, allowing for color changes and mode settings.
App Installation and Login
- Scan the QR code provided in the manual (or search for "MICTUNING P1Y App Install" on YouTube) to download the MICTUNING App.
- Register an account and log in.
Connect Your Phone to Switch Panel
- Search for your device name in the app: P1Y-2LP-6 (for 6 Gang Panel), P1Y-2LP-8 (for 8 Gang Panel), or P1Y-2LP-12 (for 12 Gang Panel).
- Click on the Switch Panel icon to start setting.
Backlight Setting via App
- Click on the Color Wheel to select your desired color.
- To enable color switching effects, click on the Color Changing Pattern or the DIY effect button.
- Adjust brightness and flashing speed by dragging the sliders.
Control Mode Setting via App
- After clicking on a button in the app, select its control mode (Constant, Momentary, Flash, Strobe). You can set individual control modes for every button.
- The Flashing Speed slider allows you to adjust the flashing speed.
- Find the corresponding icon for a button; you can click on "DefaultIcon" to select.
- If no correct icon is available, you can customize your own. Click on "Photograph" to take a picture or select from your album, then name the device by clicking on "Designation".
Group Control Feature
- Click "Group" to enter grouping.
- Click "+" to create a group.
- Select the switches to group and click "Save".
- Name your group.
- Grouping is completed.
3. Maintenance
To ensure the longevity and proper functioning of your MICTUNING P1Y+6 Gang Switch Panel, follow these general maintenance guidelines:
- Cleaning: Regularly wipe the switch panel and control box with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure the circuit breaker and fuses are in good condition.
- Software Updates: Keep the MICTUNING App updated to the latest version to benefit from new features and bug fixes.
- Environmental Protection: While the product is designed for automotive use, avoid exposing the control box to extreme moisture or direct water spray.
4. Troubleshooting
- Q: How does a normal switch panel control 2 or more lights at the same time with one button?
- A: Connect the wires from both accessories to the same positive and negative outputs of the control box. Ensure that the accessories connected to a single circuit will not draw more power than the maximum for that control box circuit and the fuse for that circuit.
- Q: Can I connect negative wire to the common cathode?
- A: Yes.
- Q: What is the maximum running current?
- A: The 6 or 8-gang switch panel is rated for 60A, and the 12-gang is 80A.
- Q: When connecting the battery, the power indicator is always on. Will it cause battery loss?
- A: No. The standby current of this product is less than 3mA. A 60AH battery provides 833 days of standby power for the switch panel without charging it.
- Q: How do I know if the wiring is correct?
- A: If the power indicator is red on, it means the connection is correct.
- Q: What is the function of the control box's power switch?
- A: The Control Box Switch provides two ways to obtain power: Connect ACC or Battery. It is suggested to obtain power from the battery.
- Q: What is the type of Add-a-Circuit Fuse Tap?
- A: Small fuse tap.
- Q: What should I do when the app fails to find the Bluetooth device?
- A:
- Check the wiring to ensure it's properly connected.
- For iPhones, try restarting your phone and enable app authorization and Bluetooth authorization in Privacy Settings (Phone Settings - Privacy - Bluetooth Allow the app to use Bluetooth).
- For Android devices, enable the location service and app location authorization to perform the search and connection in the app (The location function relates to privacy data, and MICTUNING assures that it won't collect such data; it is required due to physical layer regulations on Android devices).
5. Specifications
| Feature | Specification |
|---|---|
| Model Name | P1Y+6 gang switch panel |
| Special Features | Switch Panel / Wireless Remote / App Control |
| Rated Current | ≥10A (Max 60A for 6/8-gang, 80A for 12-gang) |
| Input Voltage | 12V/24V DC |
| Maximum Power | 720W@12V, 1440W@24V (for 6/8-gang) 960W@12V, 1920W@24V (for 12-gang) |
| Operating Temperature | -40°C to 105°C (-40°F to 221°F) |
| Remote Control Range | Up to 230 ft (70 m) under unobstructed conditions |
| Item Type | Switch Panel |
| Origin | Mainland China |
| Package Length | 27 cm |
| Package Width | 15 cm |
| Package Height | 10 cm |
| Package Weight | 1.9 kg |
6. User Tips
- Labeling: Utilize the provided 140 switch labels to clearly identify each accessory connected to the panel. This enhances usability and safety.
- Antenna Placement: For optimal wireless signal, ensure the antenna is placed on the right A-pillar of your vehicle, as recommended in the wiring instructions.
- App Customization: Take advantage of the MICTUNING App to personalize button colors, control modes, and even custom icons for a tailored user experience.
- Power Source: While the control box can be powered via ACC, connecting it directly to the battery is generally recommended for stable power supply.
- Brightness Adjustment: Adjust the panel's backlight brightness to a comfortable level for both daytime visibility and nighttime driving to avoid distraction.
7. Warranty and Support
MICTUNING stands behind its products with a commitment to quality and customer satisfaction.
7.1 Customer Support
If you have any questions or require assistance with your MICTUNING product, please feel free to contact us:
- Phone Support: +1 818-660-1741 (Mon-Fri 6:00pm to 2:00am PST)
- Email Support: support@mictuning.com
- Website: www.mictuning.com
7.2 Service Commitments
- Fast Delivery: Expect timely delivery. In case of delays, a $1.00 coupon code may be provided.
- Refunds: Refunds are available if the package is lost, items are damaged, or if there is no delivery within 30 days.
- Free Returns: Free returns are available within 90 days.