Sayin 376

Contents

Sayin Model 376 Portable Emergency Solar Power Radio

User Instruction Manual

Introduction

Thank you for purchasing the Sayin Model 376 Portable Emergency Solar Power Radio. This versatile device is designed for outdoor use and emergency preparedness, offering multiple power sources, radio reception, lighting, and mobile device charging capabilities. Please read this manual carefully to ensure proper use and maintenance of your radio.

Video: Overview of the Sayin Model 376 Emergency Radio features.

Safety Instructions

  • If the radio has been idle for more than 60 days, place it under strong solar light (daylight > 86000LUX) for 30 minutes or hand crank for one minute to activate the battery.
  • Avoid over-discharging the battery to prolong its service life.
  • To clean the radio surface, use a soft, damp cloth. Do not use alcohol or other liquids containing corrosive ingredients.
  • This unit is water-resistant, not waterproof. Do not submerge it in water.

Product Overview

Familiarize yourself with the radio's components and controls:

Diagram of the Sayin Model 376 radio showing controls and ports.

Image: Front and side view of the radio with labels for buttons, ports, and features.

Key Components:

  • Antenna: Extendable for improved radio reception.
  • Solar Panel: Located on top for solar charging.
  • Hand Crank: Foldable crank on the back for manual power generation.
  • LED Display: Shows frequency, battery level, and other indicators.
  • Torch Button: Activates the flashlight.
  • SOS Button: Activates the emergency alarm.
  • Band Button: Selects radio bands (FM/AM/WB).
  • TUN+/- Buttons: Adjusts radio frequency.
  • Volume +/- Buttons: Adjusts audio volume.
  • Type-C USB Input: For charging the radio's internal battery.
  • STD USB Output: For charging external devices (e.g., smartphones).
  • Earphone Jack: 3.5mm port for private listening.
  • AAA Dry Battery Compartment: For optional AAA battery power.

Setup

1. Battery Installation (AAA Dry Batteries)

  1. Locate the battery compartment cover on the bottom of the device.
  2. Remove the cover.
  3. Insert 3 AAA batteries, ensuring the negative (-) end is placed against the spring.
  4. Replace the battery compartment cover.

Note: The radio prioritizes AAA dry batteries if installed. Remove AAA batteries when not in use to prevent leakage.

Image showing the AAA battery compartment and installation.

Image: Installing AAA batteries into the compartment.

2. Initial Charging (USB-C)

  1. Insert the supplied USB cable into a USB power source (e.g., wall adapter, computer USB port).
  2. Connect the Type-C USB connector into the input port on the side of the radio.
  3. The 4 charging indicator lights will flash red while charging and turn blue when fully charged.
  4. A full charge for the internal 4000mAh Li-ion battery typically takes 2-3 hours.

It is advised to turn off the radio when charging.

Image showing Type-C USB input for charging.

Image: Connecting the Type-C USB cable for charging.

3. Hand Crank Charging

  1. Unfold the hand crank located on the back of the device.
  2. Turn the handle either clockwise or counter-clockwise to generate power. The red LED will light up when cranking.
  3. Spin the handle at 130-150 RPM for 3 to 5 minutes for initial activation or emergency power. One minute of winding provides approximately 5 minutes of radio play (medium volume) or 30 minutes of light.
Image showing the hand crank being operated.

Image: Operating the hand crank for emergency power.

4. Solar Charging

The radio's internal battery can be charged by the solar panel on the top of the device. For optimal charging, place the radio in clear, direct sunlight. The red LED indicator will light up when sufficient sunlight is received for charging.

Note: Solar charging is primarily for maintaining the battery level and is less efficient for a full charge compared to USB-C or hand crank.

Operating Instructions

1. Turning On/Off

  • Press the power button to turn on the radio. The LCD screen will display "ON".
  • Press and hold the power button to turn off the radio.

2. Radio Operation

  1. Band Selection: Press the "BAND" button to cycle through FM, AM, and WB (Weather Band) frequencies.
  2. Tuning: After selecting a band, short press "TUN+" or "TUN-" to manually adjust the frequency. Long press "TUN+" or "TUN-" to automatically search for channels; it will stop when a clear signal is found, and the green indicator light will illuminate.
  3. Volume Adjustment: Use the "VOL+" or "VOL-" buttons to increase or decrease the volume.
  4. Antenna: Extend the telescopic antenna and adjust its direction for better signal reception.
Image showing radio tuning and volume controls.

Image: Adjusting volume and switching radio channels.

3. Weather Alert Function

  • Long press the "ALERT" button to enter weather alert mode. The LCD screen will flash "ALERT" and the device will alarm upon receiving bad weather information.
  • Short press any button to play the voice alert.
  • Long press the "BAND" button to exit weather alert mode. If there is no signal, repress the alert button to exit.

4. Flashlight Operation

  • Short press the Torch button once to turn on the flashlight (Level 1).
  • Press twice for Level 2, and three times for Level 3.
  • Press again to turn off.
Image showing the flashlight in operation.

Image: The LED flashlight illuminating a wall.

5. LED Reading Lamp Operation

  • Open the solar panel cover on top of the radio. The reading lamp will automatically turn on.
  • Close the solar panel cover to turn off the reading lamp.
Image showing the LED reading lamp extended and lit.

Image: The LED reading lamp in use.

6. SOS Alarm

  • Press the "SOS" button to activate the emergency alarm. A loud siren will sound, and the LCD screen will close.
  • Press the "SOS" button again to deactivate the alarm.
Image depicting the SOS alarm function with a person and a siren icon.

Image: Visual representation of the SOS alarm feature.

7. Phone Charging (Power Bank)

The radio can act as a power bank to charge external USB devices, such as smartphones, using its internal 4000mAh battery or installed AAA batteries.

  1. Connect your device's charging cable to the STD USB Output port on the side of the radio.
  2. The radio will begin charging your device.
Image showing a phone being charged via the radio's USB output.

Image: Using the radio's STD USB output to charge another device.

8. Using Earphones

Insert a 3.5mm earphone jack into the earphone port on the side of the radio for private listening.

Image showing earphones connected to the radio.

Image: Connecting earphones to the radio's earphone jack.

Maintenance

  • Keep the device clean by wiping it with a soft, damp cloth. Avoid harsh chemicals.
  • Remove AAA dry batteries if the device will not be used for an extended period to prevent corrosion.
  • Avoid over-discharging the internal battery to maintain its lifespan.
  • Store the radio in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Problem Possible Cause Solution
Radio does not turn on. Low battery or no power. Charge the internal battery via USB-C, hand crank, or solar. Ensure AAA batteries are correctly installed if using them.
Poor radio reception. Antenna not extended or poor signal area. Fully extend the telescopic antenna and adjust its direction. Try moving to an open area.
Device not charging external phone. Radio battery is low or cable issue. Ensure the radio's internal battery is sufficiently charged. Check the USB cable for damage and ensure it's properly connected.
Weather Alert not working. No weather alert signal in the area. Ensure you are in an area with WB coverage. Long press the ALERT button to scan for signals.
Internal battery not charging to 100%. This can be normal for solar charging, or a sign of battery aging. Solar charging is primarily for maintenance. For a full charge, use USB-C. If the issue persists with USB-C, contact support.

Specifications

Feature Specification
Model Number 376
Body Material Plastic
Dimensions (WxHxD) 153 x 77 x 47 mm (6.02 x 3.03 x 1.85 inches)
Item Weight 351g
Radio Bands AM / FM / WB (Weather Band)
FM Frequency 87-108 MHz
AM Frequency 520-1710 KHz
WB Frequency 162.40-162.55 MHz
Power Supply Rechargeable Battery Pack (4000mAh/3.7V Li-ion), 3x AAA Dry Batteries (not included)
Charging Methods USB-C, Hand Crank, Solar Panel
USB Output 5V 2A (for phone charging)
Max Power Output 1.5W
Working Voltage 2.7-4.2V
Flashlight Power 1W (3 levels)
Reading Lamp LED Reading Lamp
Earphone Jack 3.5mm
Bluetooth No
WIFI No
Certifications CE, EAC, FCC, RoHS, pse, weee

User Tips

  • The radio offers good audio quality and sensitive FM reception, making it reliable for listening to broadcasts.
  • Users report long battery life for radio operation and clear sound.
  • The device feels solid and well-made, indicating durability.
  • The flashlight is bright, and the SOS alarm is loud, enhancing its emergency utility.
  • Hand-crank charging is generally more effective for quickly generating power than solar charging, especially for immediate needs.
  • The auto-seek tuning feature makes finding stations easy.
  • The compact and lightweight design makes it convenient for travel and outdoor activities.

Warranty and Support

This device comes with a 12-month warranty against manufacturing defects from the date of purchase.

If you have any questions or encounter problems with your product, please feel free to contact us. We are committed to providing professional support within 24 hours.

Your feedback is valuable and helps us improve our products and services.

Packing List

  • Sayin Model 376 Emergency Radio x1
  • User Manual x1
  • Type-C USB Cable x1
  • Lanyard x1

© 2024 Sayin. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.