1. Introduction
Foreword
Thank you for purchasing this instrument! This user's manual sets out the working principle, precautions, operation and maintenance of the instrument. To make you use this instrument better and avoid your life safety being threatened or the instrument being damaged, please read this user manual carefully before using this instrument.
Our company is only responsible for the safety and reliability of the instrument in the following situations:
- Installation, reorganization, modification and maintenance of the instrument are all carried out by professionals designated by the company or authorized by the company;
- The electrical equipment connected with the instrument meets the technical parameters given in this user manual;
- Operation according to this user manual.
This instrument is used for general human body shaping.
If the user can't use this instrument normally, some functions of the instrument may fail and endanger human health. Please use this instrument in strict accordance with the operation methods in this manual. If you use this instrument to perform functions other than those specified, all the consequences will be borne by the user, and our company will not bear any responsibility.
Our company does not guarantee in any form, including (but not limited to) the guarantee of applicability and specific applicability. Our company is not responsible for the errors contained in this manual, nor for the accidents arising from the actual use of this manual. This user's manual contains detailed information about the instrument. You can find the information you need through the catalogue. This user manual contains proprietary materials protected by the patent law, and all rights are reserved. Without the written consent of our company, no part of this user manual can be photographed, copied or modified.
The contents contained in this user manual are subject to change without notice to the user.
Manual version number: V1.0
1.1 Instrument Introduction
This instrument is a two-in-one body shaping instrument, which is mainly composed of a main machine, an EMS handle, and an inner ball roller handle.
1.2 Instrument Principle
This instrument combines two main technologies for body shaping:
1.2.1 The principle of EMS handle in body shaping
The EMS handle utilizes HI-EMT (High Energy Focused Electromagnetic Waves) technology to continuously expand and contract muscles. This process performs extreme training, deeply remodeling the internal structure of muscles, leading to the growth of myofibrils (muscle enlargement) and the generation of new protein chains and muscle fibers (muscle hyperplasia) to train and increase muscle density and volume.
The 100% extreme muscle contraction induced by HI-EMT technology can trigger a large amount of fat breakdown. Fatty acids are decomposed and then flow out from triglycerides, accumulating in adipocytes. High levels of fatty acids cause fat cells to die and be excreted by the body's normal metabolism within a few weeks.
Diagram illustrating the principle of EMS handle in body shaping.
1.2.2 The principle of inner ball roller handle in body shaping
The inner ball roller handle uses a non-invasive method combining mechanical compression micro-vibration with infrared treatment. The mechanical compression micro-vibration involves a ball rotating 360° along its axis. This rotation and rolling generate compression micro-vibration, and as the ball rotates and exerts pressure on the skin, it creates a "pulsating compression" effect. This effect achieves continuous push-pull and kneading motions, allowing the skin tissue to be tightly pulled without squeezing or damaging it.
The infrared therapy component releases infrared rays, promoting cell metabolism, enhancing oxygen-blood combination, reducing cellulite, and thereby reducing muscle stiffness and soreness, promoting cell activity, and reshaping the body.
Diagram illustrating the principle of inner ball roller handle in body shaping.
1.2.3 Inner ball roller handle and five synergies
The vascular influence between hydrostatic pressure and inflation pressure balances liquid and nutrient flow from the arterial side, with catabolites re-entering the venous side. The special arrangement of balls gradually compresses tissue through pressure and lifting movement, achieving vascular movement effects.
Diagram showing vascular influence on tissue fluid movement.
Compression micro-vibration therapy balances static vein pressure by promoting internal metabolism and hemodynamic exchange.
Scientific tests confirm that visual thermal imaging evaluation shows the thermal effect promotes blood circulation, cell metabolism, decomposes fat, reduces cellulite, and relieves muscle fatigue.
Results showing waist reduction by 4.17mm, fat reduction by 19%, and rectus abdominis repair by 11%.
1.2.4 Drainage effect
Edema results from unbalanced production and excretion of body fluids, leading to excessive retention in the interstitial space. The inner ball roller handle repeatedly pushes and kneads edematous parts, moving body fluid into circulation to remove toxins.
Diagram illustrating how lymphatic drainage reduces toxins.
1.2.5 Adjust muscles and maintain internal balance
Mechanical rotation of the inner ball roller handle, with slight pressing and kneading, promotes deep muscle relaxation, reduces muscle fatigue and pain. This therapy also simulates muscle relaxation, promotes blood circulation, enhances blood oxygen binding, and removes toxins.
Diagram illustrating muscle adjustment and improved circulation.
Clinical observation shows that compressed micro-vibration therapy is an effective treatment method to stimulate blood volume, combine with oxygenation, improve lymphatic drainage and microcirculation, and it is also an ideal method to treat venous stasis and remove toxins.
2. Product Overview
2.1 Characteristics of Inner Ball Roller Handle
- Unique 360° intelligent rotating drum handle, continuous long-term operation mode, safe and stable.
- There is an LED display on the handle to display the speed.
- The roller handle is provided with a key for controlling start or pause.
- The steel ball is flexible and smooth, effortless, the rolling process is gentle and not stinging, and the movement is soft and even pushing. Massage, lift for best results.
- There is no need for user to massage hard, and the operation is simple and safe.
2.2 Application Position of Inner Ball Roller Handle
The MYOSLIM machine can be used on multiple parts of the body:
Diagram illustrating the application areas: Waist, Abdomen, Buttocks, Thigh, Neck, Foot, Arm, Calf.
- Abdomen & Waist: To eliminate stubborn belly fat and shape the waist curve.
- Buttocks & Thighs: To lift the hips and slim the inner thighs.
- Arms & Calves: To tighten loose skin and create a slender line.
- Neck & Feet: To relieve fatigue and improve skin elasticity.
2.3 Appearance of the Instrument: Front View
Front view of the MYOSLIM EMS Sculpting Machine, highlighting the main components: Big wheel, Touch screen, Host machine, Small wheel, EMS handle, On/OFF Button.
Note: All handles can only be operated by professional operators.
2.4 Appearance of the Instrument: Back View
Back view of the MYOSLIM EMS Sculpting Machine, showing the Handle hanger, Port of EMS handle, Port of roller handle, Abdominal muscle patch cable socket, Switch, Spare fuses/Fuse, and Power plug.
2.5 Handle Display
Design of the EMS handles.
Design of the inner ball roller handles.
3. Setup
Before operating the machine, ensure all components are correctly connected.
- Power Connection: Connect the power cable to the machine's power input and then to a suitable power outlet (AC220V/50Hz or AC110V/60Hz).
- Handle Connection: Connect the EMS handles and inner ball roller handles to their respective ports on the back of the machine. Ensure connections are secure.
- Handle Placement: Place the handles in the handle hangers when not in use.
- Abdominal Muscle Patch: If using the abdominal muscle patch, connect its cable to the designated socket.
Note: Before starting any operation, ensure the EMS handle is taken out from the handle hanger and fixed to the operating position on the customer with a strap.
4. Operation
4.1 Operation Flow of the Interface
The instrument has two main functions: EMS and WHEELS (Inner Ball Roller). The selection is made via the touch screen interface.
Interface for selecting EMS or WHEELS function.
4.2 EMS Function Operation
After selecting EMS, there are two working modes: Pattern 1 and Pattern 2.
4.2.1 EMS Pattern 1 Interface
EMS Pattern 1 interface showing controls for selector channel, energy adjustment, time adjustment, stop working, and start/pause.
Instructions:
- Selector channel: Select the handle to work.
- Energy adjustment key: Adjust energy from 0-100%.
- Time adjustment key: Set treatment time from 1-60 minutes.
- Stop therapy: Shut down the handle.
- Start/pause therapy: Handle start/pause operation.
- Return: Return to the working mode selection interface.
Note: During the operation of the EMS handle, the user can set the energy and time again by himself. Please pause before setting.
4.2.2 EMS Pattern 2 Interface
EMS Pattern 2 interface showing controls for selector channel, energy adjustment, time adjustment, frequency, stop working, and start/pause.
Instructions:
- Selector channel: Select the handle to work.
- Energy adjustment key: Adjust energy from 0-100%.
- Time adjustment key: Set treatment time from 1-60 minutes.
- Frequency: Adjust frequency from 10-200Hz.
- Stop therapy: Shut down the handle.
- Start/pause therapy: Handle start/pause operation.
- Return: Return to the working mode selection interface.
4.3 WHEELS Function Operation (Inner Ball Roller)
After selecting WHEELS, there are two handle modes: Big wheel and Small wheel.
4.3.1 Big Wheel Interface
Big Wheel interface showing controls for energy adjustment, time adjustment, rotation direction, rotating speed, stop working, and start/pause.
Instructions:
- Energy adjustment key: Adjust RF from 0-50.
- Time adjustment key: Set treatment time from 1-60 minutes.
- Rotating speed adjustment key: Adjust speed from 0-10.
- Rotation direction adjustment key: FWD (clockwise) / REV (counterclockwise).
- Stop therapy: Shut down the handle.
- Start/pause therapy: Handle start/pause operation.
- Return: Return to the working mode selection interface.
Note: When the handle of the inner ball roller is pressed to contact the skin, the blue light turns red.
4.3.2 Small Wheel Interface
Small Wheel interface showing controls for energy adjustment, time adjustment, rotation direction, rotating speed, stop working, and start/pause.
Instructions:
- Energy adjustment key: Adjust RF from 0-50.
- Time adjustment key: Set treatment time from 1-60 minutes.
- Rotating speed adjustment key: Adjust speed from 0-10.
- Rotation direction adjustment key: FWD (clockwise) / REV (counterclockwise).
- Stop therapy: Shut down the handle.
- Start/pause therapy: Handle start/pause operation.
- Return: Return to the working mode selection interface.
Note: When the handle of the inner ball roller is pressed to contact the skin, the blue light turns red.
4.4 General Precautions for Use
- Please don't use it when you feel full, and use it at least one hour after meals.
- Remove any metal jewelry you are wearing before using the instrument.
- Before starting the operation, touch the EMS handle vertically to the use part, and then turn on the main switch to adjust the intensity of the operation mode.
- First, adjust the intensity to the lowest level, and then increase the intensity in turn according to the user's skin tolerance.
- Do not eat or drink during operation, and try to eat one hour after operation.
4.5 Contraindications
Do not use this instrument if any of the following conditions apply:
- People with large wounds or ulcers on their skin.
- Patients with heart disease (such as arrhythmia), especially those with pacemakers.
- Cancer patients.
- Patients with infectious diseases.
- Pregnant women, lactating women, and menstruating women.
- Major surgical patients and diabetic patients.
- People with any metal in their bodies.
- People with cerebrovascular disease (stroke patients).
4.6 Precautions for Customers During and After Use
- After use, users should replenish water in time.
- Do not overeat, arrange food and sleep reasonably.
- Be sure to strengthen moisturizing and sun protection after use.
- Avoid eating spicy food.
- Avoid soaking in hot springs and saunas for three days after use.
5. Maintenance
5.1 Daily Inspection
- Check instruments and components regularly.
- Regularly check whether the connection between the power socket and the grounding wire is reliable.
5.2 Cleaning
- Clean the instrument regularly to ensure sanitary conditions and normal operation of the equipment.
- Before cleaning, please turn off the power of the instrument. You can wipe the equipment shell with a wet cloth, soapy water, or neutral detergent.
- Do not clean internal circuits.
5.3 Replace Fuse
- When replacing the fuse, to prevent electric shock, please turn off the power supply and unplug it.
6. Troubleshooting
6.1 Common Faults and Troubleshooting Methods
| Fault Phenomenon | Causes | Exclusions and Workarounds |
|---|---|---|
| Device not working | The power plug is not inserted into the socket; Power switch not on; Power fuse failure. | Check the power. Check the power switch. Replace the fuse. |
| Handle not working | Check the handle for loose. | Reposition the handle. |
7. Specifications
7.1 Main Machine Technical Parameters
| Attribute | Value |
|---|---|
| Input power | AC 110V-220V 50/60Hz |
| Screen size | 10.4 inches |
| Screen type | resistance screen |
| Screen resolution | 800x600 |
| Equipment size | 42x40x107cm |
| Net weight of equipment | 37.6kg |
| Packing size | 59x52x122cm |
| Packing weight | 80kg |
| Instrument color | black |
7.2 EMS Handle Parameters
| Attribute | Value |
|---|---|
| Input maximum power | 3000 VA |
| Frequency | 10-200Hz |
| Magnetic flux density | 5T |
7.3 Roller Handle Parameters
| Attribute | Value |
|---|---|
| Input maximum power | 200 VA |
| Frequency | 448KHz |
| Small handle speed | 400rpm |
| Large handle speed | 400rpm |
7.4 Product Package Contents
| Serial | Name | Quantity | Picture |
|---|---|---|---|
| 1 | Host | 1 set | ![]() |
| 2 | EMS Handles | 2 | ![]() |
| Roller Handles | 1 Big, 1 Small | ![]() |
|
| 3 | Bandage | 2 (100*7cm), 2 (60*7cm) | |
| 4 | Power cable | 1 | |
| 5 | Abdominal Muscle Piece and Connecting Line | 1 | |
| 6 | Electronic manual | 1 copy |
8. Storage and Transportation
8.1 Storage
The instrument shall be stored in the original packing box, in a well-ventilated room, with an ambient temperature of -10°C~40°C and a relative humidity of no more than 93%. It shall not be placed in harmful gases, inflammable and explosive substances, and corrosive gases.
8.2 Transportation
The instruments in the packaging condition are suitable for road, railway, air, and water transportation. In the process of loading, unloading, and transportation, serious vibration should be prevented, and it should not be affected by moisture. It should not be mixed with flammable and corrosive substances. Specific requirements are also stipulated in the order contract.
9. Warranty and Support
9.1 Warranty Card Information
1. The machine can be replaced with a new machine within 7 days from the date of purchase (with the receipt). The mainframe is guaranteed for one year from the date of receipt (except fragile parts and other non-warranty parts or expiration of the warranty period), and it can also be responsible for maintenance and updating, and the maintenance fee needs to be charged appropriately. If the instrument is damaged and needs to be repaired, the company will bear all the freight within six months from the date of receipt; For a period of more than six months and less than one year, the buyer and the company shall bear half of all the freight, and the buyer shall bear all the freight for more than one year.
2. Free warranty service is not provided for the following user's failures caused by personal reasons:
- Faults caused by unauthorized disassembly and modification of this product;
- Failure caused by accidental fall;
- Failure caused by lack of reasonable maintenance;
- Failing to follow the correct instructions in the manual.
If you have questions, need services or need information, please contact our company.
9.2 Our Service
- 24 hours online service
- Instructions and operation video training
- Free spare parts
- Video technical support
- Online support
For any clarifications, please contact our customer service team.
10. User Tips
- Efficient Operation: The 4-handle design allows for treating two clients simultaneously, significantly boosting work efficiency in a salon setting.
- Quiet Operation: The machine runs quietly and stays cool during use, contributing to a more relaxed treatment experience for clients.
- Targeted Results: Focus on specific areas like hips for a rounder, lifted appearance, or abdomen for fat reduction and waist slimming.
- Lymphatic Drainage: Utilize the roller massage function for lymphatic drainage and to relax stiff muscles, which can also improve edema and orange peel skin.
- Consistent Use: Visible muscle firming can be seen after just one session, with optimal results typically achieved after 3-5 sessions. For fat reduction, consistent use over 3 months can lead to significant waist circumference reduction.
11. Frequently Asked Questions (FAQ)
- Q: What is the price of the machine without the roller?
- A: Shipping costs and import fees vary depending on the destination country's regulations and the specific delivery address; additional charges may also apply for remote locations. We will inform each customer of the minimum amount payable—please contact me for further details.
12. Product Demonstration Video
Watch this video for a visual guide on operating the MYOSLIM EMS Sculpting Machine.
Video demonstrating the operation and features of the MYOSLIM EMS Sculpting Machine.
13. Additional Resources
For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF).


