1. Introduction
Thank you for purchasing the Magcubic HY300F Mini Projector. This manual provides important information regarding the operation and maintenance of your projector. Please read it carefully before use and keep it for future reference.
Attention:
- The projector is not dustproof or waterproof.
- To reduce the risk of fire and electric shock, do not expose the projector to rain or fog.
- When the projector is working, please do not look directly into the lens. The strong light can flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
2. Product Overview
The Magcubic HY300F is a smart mini projector featuring Android 14, Wi-Fi 6, and Bluetooth 5.4, designed for a fast, smooth, and familiar smart experience. It boasts 300 ANSI Lumens brightness and a 10000:1 contrast ratio, supporting native 720P resolution with 8K video playback capability.

2.1. Structure Description
Familiarize yourself with the projector's components:
- Lens: Main projection component.
- Focus Wheel: Adjusts image sharpness.
- Air Inlet/Vent: For cooling the projector. Do not cover.
- Speaker: Built-in audio output.
- USB Port: For connecting external devices.
- HDMI™ Port: For connecting external video sources.
- Power Input: DC 36V 0.95A or 12V 1A.

3. Setup
3.1. Power Connection
Connect the original power adapter to the projector's power input port and then to a power outlet. The projector should work under the specified rated power supply.
3.2. Remote Control Pairing
The projector comes with a BT Air Remote. To pair it:
- Turn on the projector.
- On the boot interface, navigate to Settings > BT setting.
- Ensure Bluetooth is 'ON'.
- Click 'Refresh Device' and select the objective device to pair.
Calibration of the Flying Squirrel Micro-drift: If the remote's pointer drifts, you can calibrate it. Simultaneously press and hold the 'OK' and 'HOME' buttons on the remote control for 2 seconds. The indicator light will stay on. Then place the remote control flat on a desktop. After keeping it still for 5 seconds, the light will go off, and the flying squirrel will be successfully calibrated.
3.3. Network Connection (Wi-Fi)
To connect to a Wi-Fi network:
- From the boot interface, navigate to Settings > Networking Setting > WIFI setting.
- Ensure Wi-Fi is 'ON'.
- Select your desired Wi-Fi ID from the list and input the password to connect to the internet.
4. Operating Instructions
4.1. Basic Navigation
Use the directional buttons and 'OK' button on the remote control to navigate through the projector's interface. The 'HOME' button returns to the main screen, and the 'RETURN' button goes back to the previous screen.
4.2. Projection Settings
Access projection settings via Settings > Projection settings. Here you can adjust:
- Projection Mode: Adjust how the image is projected (e.g., front, rear, ceiling).
- Installation Mode: Specifies the projector's physical orientation.
- Digital Scaling: Adjusts the size of the projected image.
- Auto Trapezoidal Correction: Automatically corrects image distortion.
- Manual Trapezoidal: Manually adjust keystone correction.
- Reset Trapezoidal Correction: Resets all keystone adjustments.

4.3. Screen Mirroring (Wireless Screen)
To mirror your Android device's screen:
- Ensure your Android device (phone, tablet, etc.) is on the same local wireless LAN as the projector.
- On the projector, navigate to Home Screen > My Apps > ScreenCast.
- Open the ScreenCast service and follow the on-screen instructions to turn on phone mirroring connection.
4.4. App Store
The built-in App Store allows you to install applications with one click. Applications can be used directly after installation, providing easy access to various content.
4.5. HDMI™ Input
After connecting the projector to another output device via an HDMI cable, select the HDMI input source from the projector's input menu to display content.
4.6. Other Settings
In the Settings > Other Setting menu, you can configure:
- Button Sound: Enable or disable button press sounds.
- Screen Saver: Set the screen saver time. The projector will enter screen saver mode after the set time elapses when there is no operation or playback.
- Timed Shutdown: Schedule the projector to turn off automatically.
- Restore Factory Settings: Reset the projector to its original factory settings.
5. Maintenance
5.1. Cleaning
- Regularly clean the projector vents to prevent dust accumulation, which can cause cooling malfunction and reduce the projector's lifespan.
- Use a soft, dry cloth to clean the lens. Avoid abrasive materials or harsh chemicals.
5.2. General Care
- Do not cover the projector's vents.
- Do not use the projector in greasy, damp, dusty, or smoky environments, as oil or chemicals can cause malfunctions.
- Handle the projector with care during daily use to avoid physical damage.
- Disconnect the power if the projector is not in use for a long time.
- Non-professionals are forbidden to disassemble the projector for testing and maintenance.
6. Troubleshooting
- No Power: Ensure the original power adapter is securely connected to both the projector and a working power outlet.
- Blurred Image: Adjust the focus wheel on the projector. If the image is still unclear, check the projection distance and adjust digital scaling or keystone correction in settings.
- No Wi-Fi/Bluetooth Connection: Verify that Wi-Fi or Bluetooth is enabled in settings and that the correct network/device is selected with the correct password. Re-pair the Bluetooth remote if it's unresponsive.
- Overheating: Ensure all projector vents are clear and unobstructed. Operate the projector in a well-ventilated area.
- No Sound: Check the volume settings on the projector and any connected external audio devices. Ensure the built-in speaker is not muted.
- Remote Control Not Responding: Check battery levels. Re-pair the remote control via Bluetooth settings. Calibrate the flying squirrel micro-drift if the pointer is erratic.
- No Image from HDMI: Ensure the HDMI cable is securely connected to both the projector and the source device. Select the correct HDMI input source on the projector.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Magcubic |
| Model | HY300F |
| System | Android 14 |
| Optical Resolution | 1280x720dpi (Native 720P, supports 8K video playback) |
| Brightness | 300 Ansi Lumens |
| Contrast Ratio | 10000:1 |
| Projected Dimension | 35-135 inches |
| Throw Ratio | 0.9:1 |
| Projective Mode | Throwing, Back Projection |
| Projection Technology | LCD |
| Screen Scale | 16:09 |
| Light Source | LED |
| Keystone Correction | Auto Correction |
| Built-in Speaker | Yes |
| Bluetooth-compatible | Yes (BT5.4) |
| Wi-Fi | Yes (Wifi6) |
| Input/Output | USB, HDMI |
| Power Source | DC |
| Weight | 0.983kg |
| Package Dimensions (L x W x H) | 22cm x 16cm x 16cm |
| Certification | CE |
8. User Tips
- For optimal viewing, position the projector 4 to 6 feet away from the screen to achieve the best image quality for screen sizes between 35 and 150 inches. This makes it perfect for small spaces.
- When playing a video, press the 'MENU' button on the remote to access Display Settings. Here you can fine-tune Picture Mode, Contrast, Hue, Saturation, and Sharpness to enhance your viewing experience.
- Keep your projector's software updated to ensure optimal performance and access to the latest features and app compatibility.
9. Warranty and Support
For any support inquiries, technical assistance, or warranty claims, please contact our Brand Support Team.
Email: support@magcubic.com
When contacting support, please include your product model (HY300F) and a detailed description of the issue for prompt assistance.