1. Introduction
This manual provides instructions for the safe and effective operation of your KKMOON Handheld Thermal Imager Infrared Camera. This device is a multifunctional tool designed for non-contact temperature measurement across various applications, from industrial inspections to household maintenance.
2. Safety Information
Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in injury or damage to the device.
- Do not expose the device to extreme temperatures, humidity, or corrosive environments.
- Avoid direct impact or dropping the device.
- Do not attempt to disassemble or modify the device. Repairs should only be performed by qualified personnel.
- Keep the device away from strong electromagnetic fields.
- Ensure the device is charged using the provided cable and a compatible power source.
3. Package Contents
Verify that all items are present in your package:
- 1 x Thermal Imager Infrared Camera
- 1 x Charging Cable (Type-C)
- 1 x Lens Wiping Cloth
4. Product Overview
The KKMOON Handheld Thermal Imager features a compact design with a 2-inch LCD screen for clear thermal imaging display. It includes a Type-C port for charging and data transfer.
5. Specifications
| Feature | Detail |
|---|---|
| Item Type | Thermal Imager Infrared Camera |
| Material | Epoxy Resin Board, Printed Circuit Board |
| Mode | MLX90,640 ESF BAB |
| Sensor Resolution | 24 x 32 infrared display |
| LCD Display Resolution | 240 x 320 |
| Screen Size | 2.0 inches |
| Display Mode | Interpolation simulation display |
| Measuring Range | -40 ℃ to 300 ℃ |
| Measurement Accuracy | ± 2 ℃ |
| Refresh Speed | 8HZ |
| Market Angle | Horizontal 55 ° x Vertical 35 ° |
| USB Function | USB Emulation, USB Disk Capacity: 16MB |
| Picture Catch Function | Yes (requires holding for at least 15s) |
| Interface | TYPE C Standard Interface |
| Battery | Built-in 3.7V 600mAH Battery |
| Battery Included | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
| Dimensions (approx.) | 10cm (Length) x 5cm (Width) |
6. Setup
6.1 Initial Charging
The device comes with a built-in 3.7V 600mAH battery. Before first use, it is recommended to fully charge the device using the provided Type-C charging cable and a standard 5V USB power adapter (not included).
6.2 Power On
The device can be used directly after startup. Locate the power button (usually indicated by a power symbol) and press it to turn on the thermal imager.
7. Operating Instructions
7.1 Basic Operation
Once powered on, the 2-inch LCD screen will display the thermal image. The screen typically shows the minimum temperature (Min), maximum temperature (Max), and the center point temperature (Ta) of the observed area.
7.2 Picture Catch Function
The device supports a picture catch function. To capture an image, hold the device steady for at least 15 seconds to ensure a stable reading and successful capture.
7.3 Data Transmission
The thermal imager has a built-in 16MB USB disk capacity for storing images. To access or manage stored pictures:
- Connect the device to a computer or mobile phone using the provided Type-C data cable.
- The device will appear as a removable storage drive.
- You can then view, copy, or delete image files internally without additional software.
7.4 Applications
This thermal imager is suitable for a wide range of applications, including but not limited to:
- High accuracy non-contact temperature measurement
- Security and intrusion detection
- Human body temperature detection
- Environmental temperature measurement and control of intelligent buildings
- Automobile air conditioning control
- Microwave oven and oven temperature detection and control
- Temperature Monitoring of Industrial Parts
- Visual temperature sensing
- Side leakage and maintenance of floor heating equipment
- Thermal detection of circuit boards and components
8. Maintenance
8.1 Cleaning
- Use the provided lens wiping cloth to gently clean the camera lens and screen.
- Do not use abrasive cleaners or solvents on any part of the device.
- Wipe the body of the device with a soft, dry cloth.
8.2 Storage
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
9. Troubleshooting
If you encounter issues with your thermal imager, please refer to the following common problems and solutions:
- Device does not power on: Ensure the battery is charged. Connect the device to a power source using the Type-C cable and try again.
- Screen is blank or frozen: Try restarting the device by holding down the power button until it turns off, then power it back on.
- Cannot capture images: Ensure you hold the device steady for at least 15 seconds when attempting to capture a picture. Check if the internal storage is full; if so, transfer or delete old images.
- Cannot connect to computer/transfer data: Ensure the Type-C cable is securely connected to both the device and the computer. Try a different USB port or cable.
- Inaccurate temperature readings: Ensure the lens is clean and free from obstructions. Avoid using the device in environments with rapid temperature changes or strong air currents.
10. User Tips
- For best results, allow the device to acclimate to the ambient temperature of the measurement environment for a few minutes before use.
- When measuring small or distant objects, try to get as close as safely possible to improve accuracy.
- Remember that thermal imagers detect surface temperature. Factors like emissivity, reflections, and air movement can affect readings.
11. Warranty and Support
For detailed warranty information, technical support, or further inquiries, please refer to the official user manual PDF available online. You can access the PDF manual at: User Manual (PDF).