Trimui TG5040

Contents

Trimui Smart Pro Handheld Game Console User Manual

Model: TG5040 | Version: 1.0.4 | Language: English | Date: 2026-02-25

1. Safety & Compliance

  • Read all instructions carefully before using the console to avoid damage or personal injury.
  • Keep the device away from water, high temperature, dust, and strong impact. Do not expose it to direct sunlight for a long time.
  • Do not disassemble, repair, or modify the console by yourself; this will void the warranty and may cause short circuits or fire hazards.
  • Use only the original or certified charging accessories (5V/1.5A-3A). Do not use dynamic voltage fast chargers to prevent battery damage.
  • Avoid using the console while charging for extended periods to prevent overheating. The charging current has been optimized to 1950mA in the latest firmware for faster charging.
  • Keep small parts (such as TF cards) away from children under 3 years old to avoid choking hazards.
  • Stop using the console immediately if it produces abnormal heat, odor, deformation, or abnormal noise. Disconnect the power supply and contact official support.
  • The console contains a 5000mAh polymer battery; do not puncture, squeeze, or short-circuit the battery.

2. Product Overview

2.1 Basic Specifications

FeatureSpecification
Product NameTrimui Smart Pro Handheld Game Console
ModelTG5040
Launch DateNovember 2023
Operating SystemCustom Linux Tina OS (supports CrossMix-OS custom firmware)
Display4.96-inch IPS Fully Laminated Screen, 1280x720 Resolution (296 PPI), 16:9 Aspect Ratio, 60Hz Refresh Rate, Tempered Glass Protection
ChipsetAllwinner A133 Plus (A133P)
CPUQuad-Core ARM Cortex-A53, 1.8GHz, 4 Cores & 4 Threads
GPUPowerVR GE8300, 660MHz
RAM1GB LPDDR4 (LPDDR4X for some versions)
Internal Storage8GB eMMC Built-in Storage
External StorageSupports Micro SD (TF) Card, Max 256GB (FAT32 Recommended; exFAT/NTFS supported in v1.0.3+ firmware)
Battery5000mAh Polymer Battery, Up to 5 Hours of Gameplay, Low Battery Warning via Joystick LEDs, Auto Shutdown on Low Battery
AudioBuilt-in Dual Stereo Speakers, 3.5mm Headphone Jack (no independent volume control key; volume adjusted via system settings or in-game menu)
ConnectivityWiFi (2.4G), Bluetooth 4.2, USB-C Port (Charging + OTG + Data Transfer), Supports External Gamepad Connection
Dimensions & Weight158mm × 78mm × 18mm, Approximately 220g
Games TypeRetro Game
Games Included100000+
Supporting LanguageEnglish, Polish, Spanish, Simplified Chinese, Japanese
CertificationCE
Diagram illustrating key specifications of the Trimui Smart Pro, including screen size, resolution, CPU, GPU, charging, mood LED, and battery.
Figure 1: Key Specifications Overview

2.2 Button & Port Layout

  • Front Panel: Dual Analog Sticks, D-pad (Direction Control), A/B/X/Y Action Buttons, START Button, SELECT Button
  • Top Panel: L1/L2/R1/R2 Shoulder Buttons, FN (Function) Key, WiFi/Bluetooth Indicator
  • Right Side: Power Key (with Power Indicator Light), Joystick LED Indicator (low battery warning)
  • Bottom Panel: USB-C Port (Charging, OTG, Data Transfer), Micro SD (TF) Card Slot, 3.5mm Headphone Jack
  • Back Panel: Speaker Grilles (Dual Stereo), Battery Compartment (Non-removable)
Close-up images detailing the A/B/X/Y keys, Mood LED, L/R keys, custom FN switch, and built-in stereo speakers on the Trimui Smart Pro.
Figure 2: Outstanding Details and Button Layout
Multi-angle view of the Trimui Smart Pro console, showing the top, bottom, and side panels with ports and buttons.
Figure 3: Console Layout (Top, Bottom, and Sides)

3. Setup

3.1 Power On/Off/Sleep Mode

  • Power On: Press and hold the Power Key for 3 seconds until the TRIMUI logo appears on the screen. The console supports 4-second fast boot for quick gaming access.
  • Power Off: Press and hold the FN Key for 2 seconds to open the system quick menu, then select "Power Off" and confirm with the A Button. Alternatively, in the main system settings, select "Power Management" → "Power Off".
  • Sleep Mode: Short-press the Power Key to enter sleep mode (screen turns off, console enters low-power state). Short-press the Power Key again to wake up the console. Sleep mode saves power and retains your current game progress.
  • Force Restart: If the console freezes or becomes unresponsive, press and hold the Power Key for 10 seconds to force a restart. This will not affect saved game data or system settings.

3.2 Charging the Console

  • Use the included or certified USB-C cable and 5V/1.5A-3A charger to charge the console via the bottom USB-C port.
  • Charging Indicator: When charging, the Power Indicator Light turns red; when fully charged, it turns green. The latest firmware optimizes the charging current to 1950mA, reducing full charging time to approximately 2.5-3 hours.
  • Low Battery Warning: When the battery level drops below 10%, the joystick LED indicator will flash red, and a low battery prompt will appear on the screen. The console will automatically shut down when the battery level is critically low to protect the battery.
  • Charging Notes: Do not use dynamic voltage fast chargers (e.g., 9V/12V fast chargers) as they may damage the battery. Avoid using the console for extended periods while charging to prevent overheating. If the charging indicator does not light up, check the USB-C cable, charger, or port for dust/debris.

3.3 TF Card Installation & Management

  • TF Card Requirements: Supports Micro SD (TF) cards up to 256GB. FAT32 format is recommended for maximum compatibility; exFAT/NTFS formats are supported in firmware version 1.0.3 and above.
  • Installation: Turn off the console first, insert the TF card into the bottom TF card slot with the gold contacts facing downward, and push until it clicks into place. Do not force the TF card to avoid damaging the slot.
  • Initial Setup: For new TF cards, format the card to FAT32 (via computer or console settings) before use to ensure stable performance. Formatting will erase all data on the card, so back up important files first.
  • File Management: Place game files in the corresponding emulator folders (e.g., "NES" for NES games, "GBA" for GBA games, "PSP" for PSP games) on the TF card. The console will automatically detect and display the games in the game list after power-on.
  • Removal: Turn off the console before removing the TF card. Gently press the TF card to eject it from the slot.

4. Operating

4.1 Default Button Mapping

  • D-pad: Move characters, navigate menus, select options.
  • Analog Sticks: Precision movement (for 3D games, e.g., PSP titles), alternative to D-pad for navigation.
  • A Button: Confirm selections, jump, or perform primary in-game actions.
  • B Button: Cancel selections, backtrack in menus, or perform secondary in-game actions.
  • X/Y Buttons: Customizable in-game actions (varies by emulator and game).
  • START Button: Start a game, pause/resume in-game, or open in-game menus (varies by game).
  • SELECT Button: Open emulator settings, switch game modes, or access additional in-game functions.
  • L1/L2/R1/R2 Shoulder Buttons: Auxiliary in-game actions (e.g., shooting, defending, switching weapons).
  • FN Key: Open system quick menu, trigger custom shortcuts, or access advanced settings.

4.2 Game Usage Guide

  1. Insert a formatted TF card (with game files in corresponding folders) into the console (power off first).
  2. Power on the console; it will boot up in 4 seconds and automatically detect the TF card and game files.
  3. On the main menu, use the D-pad or analog stick to select "Game List" and press the A Button to confirm.
  4. Navigate the game list to find your desired game, then press the A Button to start the game.
  5. In-game Quick Menu: Press the FN Key to open the quick menu, where you can:
    • Save/Load Game State (supports multiple save slots per game).
    • Adjust Screen Settings (aspect ratio, filter, brightness).
    • Modify Button Mapping (customize buttons for individual games).
    • Adjust Game Speed (speed up/slow down gameplay).
    • Exit the Game (return to the game list or main menu).
Video 1: Trimui Smart Pro User Interface and Game Selection

4.3 Supported Emulators & Games

  • Supported Emulators: The console supports over 20 retro game emulators, including NES, GB, GBC, GBA, SFC, MD, NeoGeo, Arcade (MAME), PS1, and PSP. It can run most classic retro games smoothly, and even 30fps smooth operation for PSP masterpieces like "God of War" and "Warriors Orochi" after system optimization.
  • Supported Game Formats: .zip, .nes, .smc, .gb, .gba, .bin, .iso, .cue, .mame, .psp, etc. Ensure game files are in the correct format for the corresponding emulator.
  • Note: Some large PSP games may experience slight frame drops due to hardware limitations. 4:3/1:1 aspect ratio retro games will display with black borders on the 16:9 screen, which can be adjusted via the in-game quick menu (screen stretch option).

4.4 Custom Shortcuts (FN Key)

  • Press FN + A: Mute/Unmute audio (since there is no independent volume control key).
  • Press FN + B: Adjust screen brightness (cycle through brightness levels).
  • Press FN + START: Take a screenshot (saved to the TF card's "Screenshots" folder).
  • Press FN + SELECT: Switch between analog stick and D-pad control.
  • Customize Shortcuts: In the system settings, select "Shortcut Settings" to modify the FN key combinations according to your preferences.

5. Connectivity & System Settings

5.1 WiFi Connection

  • On the main menu, select "Settings" and press the A Button.
  • Navigate to "Network Settings" → "WiFi" and select "Enable WiFi".
  • The console will scan for available WiFi networks. Select your WiFi network from the list and enter the password (using the on-screen keyboard) to connect.
  • WiFi Functions: Use WiFi for firmware updates, online multiplayer (for supported games), and file transfer between the console and computer. Note: The console uses 2.4G WiFi, which may have slight latency for online gaming.

5.2 Bluetooth Connection

  • In "Settings" → "Bluetooth", select "Enable Bluetooth".
  • Put your Bluetooth device (earphones, speakers, gamepad) into pairing mode.
  • The console will detect the Bluetooth device. Select the device from the list to complete pairing.
  • Note: Bluetooth gamepads can be used to replace the console's built-in controls for a better gaming experience. Bluetooth audio devices can help compensate for the console's average built-in speaker quality.

5.3 USB-C & OTG Function

  • Charging: Use the bottom USB-C port to charge the console (see Section 3.2 for details).
  • OTG Connection: Connect external devices (USB flash drives, keyboards, wired gamepads) to the console via a USB-C OTG adapter. The console will automatically detect the device.
  • Data Transfer: Connect the console to a computer via a USB-C cable to transfer game files, screenshots, or firmware update files. The computer will recognize the console as a removable storage device.

5.4 System Settings

  • Display Settings: Adjust screen brightness, aspect ratio, screen filter (e.g., CRT filter for retro games), and screen timeout.
  • Sound Settings: Adjust volume (since there is no independent volume key), enable/disable stereo sound, and set audio output (speaker/headphone).
  • Language Settings: Select your preferred language from the supported list (multi-language support).
  • Time & Date Settings: Set the system time and date manually or via network synchronization (when WiFi is connected).
  • Power Management: Adjust sleep timeout, enable/disable auto-shutdown on low battery, and view battery status.
  • Firmware Update: Connect to WiFi, select "Firmware Update" → "Check for Updates", and follow the prompts to update the console firmware. Ensure the battery level is above 50% before updating.
  • Custom Firmware: The console supports CrossMix-OS custom firmware. Refer to the official guide for firmware installation instructions (note: installing custom firmware may void the warranty).
  • Factory Reset: Select "System" → "Factory Reset" to restore the console to its default settings. This will erase all user data (games, saves, settings), so back up important files first.

6. Maintenance

6.1 Maintenance Tips

  • Cleaning: Use a dry, soft cloth to clean the console's surface, screen, and ports. Do not use alcohol, water, or corrosive liquids, as they may damage the screen and internal components.
  • Storage: Store the console in a dry, cool place away from direct sunlight, high temperature, and humidity. Avoid placing heavy objects on the console to prevent deformation.
  • Battery Care: Do not overcharge the console (unplug after fully charged). Use only certified charging accessories. If the console is not used for a long time (more than 1 month), charge it to 50% first and recharge it every 3 months to maintain battery health.
  • TF Card Care: Avoid removing the TF card while the console is powered on (may cause data loss). Back up game saves and important files regularly.
  • Physical Protection: The console's body is not highly drop-resistant; use a protective case to avoid damage from drops or impacts. The screen is protected by tempered glass, but avoid scratching it with sharp objects.

7. Troubleshooting

Console Won't Power On:

  • Charge the console for at least 10 minutes (the battery may be completely drained).
  • Check if the Power Key is pressed correctly (hold for 3 seconds).
  • Try a different USB-C cable and charger to rule out charging accessory issues.
  • If none of the above works, press and hold the Power Key for 10 seconds to force a restart.

Games Not Loading/Detected:

  • Check if the TF card is properly inserted (power off and reinsert the card).
  • Verify that the game file format is supported by the corresponding emulator.
  • Ensure game files are placed in the correct emulator folder (e.g., PSP games in the "PSP" folder).
  • Format the TF card to FAT32 (exFAT/NTFS may not be supported in older firmware versions).

No Sound:

  • Adjust the volume via the system settings or in-game quick menu (press FN Key → Sound Settings).
  • Check if the console is muted (press FN + A to unmute).
  • If using headphones, ensure the 3.5mm jack is properly connected.
  • Check if the speaker grilles are blocked by dust or debris (clean with a dry soft cloth).

Unresponsive Buttons/Analog Sticks:

  • Restart the console to resolve temporary software glitches.
  • Check if there is dust or debris under the buttons/analog sticks (clean with a soft brush).
  • The sink-type analog sticks may feel loose (normal for this model); adjust the analog stick sensitivity in the system settings if needed.
  • If buttons are still unresponsive, contact official support (physical damage may require repair).

WiFi/Bluetooth Not Connecting:

  • Ensure WiFi/Bluetooth is enabled in the system settings.
  • Restart the console and the WiFi/Bluetooth device.
  • Move closer to the WiFi router (2.4G WiFi has limited range).
  • Forget the network/device and re-pair/connect.

Screen Issues (Flickering, Black Borders, Leakage):

  • Adjust the screen brightness and filter in the display settings.
  • Black borders for 4:3/1:1 games are normal; use the screen stretch option in the in-game quick menu to adjust.
  • Minor screen leakage is a known issue for some units; if leakage is severe, contact official support for replacement.

Battery Drains Quickly:

  • Reduce screen brightness and turn off WiFi/Bluetooth when not in use.
  • Enable sleep mode when the console is not in use (short-press Power Key).
  • Check for background apps/emulators running (close via the system quick menu).
  • If the battery still drains quickly, the battery may be damaged; contact official support.

8. Warranty & Support

8.1 Warranty Information

  • Warranty Period: 12-month limited warranty from the date of purchase, covering manufacturing defects (e.g., faulty components, abnormal performance).
  • Warranty Void Conditions:
    • Damage caused by accident, drop, impact, water, or improper use.
    • Disassembly, repair, or modification of the console by unauthorized personnel.
    • Damage caused by using non-certified charging accessories or custom firmware.
    • Normal wear and tear (e.g., button wear, screen scratches, analog stick looseness).
  • Warranty Service: If the console has a manufacturing defect within the warranty period, contact official support with your purchase receipt and console serial number for repair or replacement.

8.2 Contact & Support

  • Official Website: www.trimui.com (for firmware updates, user guides, and product information).
  • Customer Support Email: support@trimui.com (for technical issues, warranty claims, and feedback).
  • FAQs: Visit the official website's "Support" section for answers to common questions and troubleshooting guides.
  • User Manual (PDF): A downloadable PDF version of the user manual is available here.

9. User Tips

  • For optimal performance and game compatibility, ensure your TF card is formatted to FAT32.
  • Regularly back up your game saves and important files from the TF card to prevent data loss.
  • Consider using Bluetooth headphones for an enhanced audio experience, especially given the console's built-in speaker quality.
  • If experiencing input lag with wireless accessories, try moving closer to the console or using wired alternatives.
  • To extend battery life, reduce screen brightness and disable WiFi/Bluetooth when not actively in use.

10. FCC & CE Statement

This device complies with Part 15 of the FCC Rules and CE standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

End of Manual | Thank you for choosing Trimui Smart Pro Handheld Game Console!

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.