1. Introduction
Thank you for choosing the Erilles Mini WiFi Camera. This compact device offers 1080P HD video recording, IR night vision, and remote monitoring capabilities. This manual provides essential information for setting up, operating, and maintaining your camera.
Important Note: There are two versions of this product: one with a built-in battery and one without. Please verify your specific model. If your camera does not have a built-in battery, it requires continuous power from a 3.7V-5V/1A-2A power bank or charger to operate.
For a detailed user manual in PDF format, please refer to the User Manual (PDF).

2. Product Overview
The Erilles Mini WiFi Camera is designed for discreet monitoring with its compact form factor. It features a high-definition lens, night vision capabilities, and supports external memory for recording.

Key Features:
- Ultra-miniature size (approx. 1.1 x 0.4 x 1.1 inches)
- 1080P Full-HD video recording
- Motion detection with AI human detection alerts
- IR Night Vision with invisible LED lights
- WiFi connectivity for remote monitoring (2.4GHz only)
- Supports MicroSD/TF card up to 128GB (not included)
- Cycle recording functionality
- Timestamp display (can be shown/hidden)


3. Setup Instructions
3.1 Powering On/Off (No Built-in Battery Version)
If your camera does not have a built-in battery, it does not have a dedicated ON/OFF button. Connect the camera to a 3.7V-5V/1A-2A power bank or charger. The camera will automatically turn on when charging. The blue light will flash slowly, indicating AP Mode.

3.2 Powering On/Off (Built-in Battery Version)
If your camera has a built-in battery, ensure it is fully charged (2-3 hours) before first use. The camera will turn on automatically when charging. It has two buttons: one is the reset key, and the other is a decorative key with no function.

3.3 Resetting the Camera
If you encounter connection issues or need to reset the camera, press the reset key for approximately 15-20 seconds. The red and blue lights will go out and then light up again, indicating a successful reset. If the reset is unsuccessful, please try again.
3.4 Inserting a Memory Card
Insert a Micro SD card (TF card) into the TF Card Slot to save recordings. The camera supports up to 128GB. (Memory card not included).

3.5 APP Installation
- Download the "iWFCam" app. You can scan the QR code below or search for "iWFCam" in your app store.

3.6 Camera-Phone Connection (AP Mode)
- Ensure the camera is powered on and the blue light is flashing slowly (AP Mode).
- On your phone, go to WLAN settings and connect to the camera's hotspot (named with "BK***" and no password).
- Open the "iWFCam" app.
- If using an Android phone, a message to "Confirm Connection" may pop up. Keep connecting with the camera.
- This connection should be established within 5 meters for a strong signal.

3.7 Camera-APP Remote Connection (IP Mode)
For remote monitoring, connect the camera to your local WiFi network (2.4GHz only).
- Start the "iWFCam" app. The camera should automatically be added online.
- Click the "Setting" icon next to the camera in the app.
- Go to "Wifi Config" and choose your router. Enter your router's network password.
- Wait for the camera's update process for remote control. Once it shows "Online", the camera's blue light will be continuously on.
- This connection should also be established within 5 meters of the router for a strong signal.

4. Operating Instructions
4.1 Live Feed and Settings
Once connected, click on the camera in the iWFCam app to view the live feed. You may be prompted to change the default password for security. Within the live feed interface, you can adjust various settings:
- Brightness
- Night Vision
- Turn off lights (see section 4.2)
- Video Resolution (1080P/720P/640P)
- Audio
- Microphone
- Video recording
- Photo capture

4.2 Turning Off Indicator Lights
To operate the camera discreetly, you can turn off the indicator lights from the app. In the video interface, press the third icon to toggle the lights on or off. The red light will go out after 15 seconds. This is a unique design feature of this camera.

4.3 Continuous Recording and Storage
The camera supports continuous video recording with no time limit, provided there is sufficient memory card space. It features cycle recording, meaning it will always keep the latest video files by overwriting the oldest ones when the memory card is full.

5. Maintenance and Care
- Keep the camera in a well-ventilated area.
- Do not cover the camera's shell or surrounding heat sinks, especially when operating or charging, to prevent overheating.
- Avoid using the product in humid working environments (working humidity: 20%-80%). The product is not waterproof.
- This is a precision electronic product. Do not subject it to strong shock or vibration.
- Do not use it near strong magnetic fields, strong electric fields, or inflammable and explosive articles.
- It is normal for the camera to become warm during operation due to the internal chip working.
6. Troubleshooting
- Cannot connect to camera (2.4G WiFi only): Ensure your WiFi network is 2.4GHz. Reset the camera by pressing the reset key for 15-20 seconds until lights go out and then light up. Then try connecting again.
- Camera not automatically added online after reset: Manually search or scan the QR code of the camera in the app to add it.
- WiFi connection unstable/loses settings: Ensure the camera is within 5 meters of your phone (AP mode) or router (IP mode) for a strong signal. Some users reported unstable WiFi, ensure a strong signal and try resetting.
- Camera does not turn on: If you have the "no built-in battery" version, ensure it is connected to a continuous power source (3.7V-5V/1A-2A). If it has a built-in battery, ensure it is fully charged.
- Poor night vision: Night vision works best in complete darkness and for short distances. Ensure there are no obstructions.
- Camera gets hot: This is normal due to the internal chip working. Ensure proper ventilation and do not cover the device.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Erilles |
| Model Number | Camera |
| Type | Mini |
| High Definition Support | 1080P (Full-HD) |
| Sensor Technology | CMOS |
| Camera Stabilization | NONE |
| Built-in Memory Size | Non |
| Memory Card Type | MicroSD / TF (Max 128GB, not included) |
| USB Interface | Micro USB2.0 5PIN |
| Voltage | 3.7V |
| Image Resolution | 1280*720P |
| File Format | JPG |
| Video Resolution (APP) | 1080P/720P/640P |
| Video (Compression) Format | AVI (M-JPEG) |
| Continuous Video Recording Time | No limited (depends on memory card capacity) |
| Operating Temperature | -10~50℃ |
| WIFI Distance | 10 meters (AP mode), Remote no limited (IP mode) |
| Night Vision Distance | 3-5M |
| Storage Temperature | -10~70℃ |
| Humidity Environment | 5%-90% (No condensation) |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
- Memory Card Compatibility: It is highly recommended to purchase a TF card directly from the seller to ensure proper functionality and avoid compatibility issues.
- WiFi Stability: If experiencing unstable WiFi connections, ensure the camera is close to the router or phone during setup and operation. A strong signal is crucial for consistent performance.
- Battery Life: For models with a built-in battery, ensure it is fully charged (2-3 hours) before use. For models without a built-in battery, a reliable power source is essential for continuous operation. Some users report short battery life (e.g., 10 minutes) for the built-in battery version, so external power is often needed for extended use.
- Discreet Operation: Utilize the app feature to turn off the indicator lights for truly invisible monitoring.
- Car Interior Use: This camera has been noted by users as effective for car interior monitoring, offering clear daytime images.
- Night Vision Range: Night vision works well in dark places, but is more effective for short distances and may not be super bright without any additional lighting.
- Audio Recording: The camera supports audio recording, which can be managed through the app settings.
9. Warranty and Support
For specific warranty information and technical support, please contact the seller directly. Keep your purchase records for any warranty claims.
10. Statement of Compliance
Disclaimer:
⚠️️Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
Use Occasion: Please strictly abide by the relevant national laws and regulations. Do not use this product for any illegal purposes, otherwise, the consequences are at your own risk.