KEBETEME Car Rear View Camera

Contents

User Manual: Car Rear View Camera

Model: Car Rear View Camera (TOD000721)

Brand: KEBETEME

1. Introduction

This manual provides essential information for the safe and effective use of your Car Rear View Camera. This camera offers high-definition video for reversing and front view applications, featuring a wide-angle fisheye lens and starlight night vision capabilities. Please read this manual thoroughly before installation and operation.

2. Safety & Warnings

Important Safety Information:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Package Contents

Please check the package for the following items:

Package contents of car rear view camera

Image: Contents of the product package.

  1. Car Camera
  2. Retail Box
  3. Power Cable
  4. Pure Copper 6m Video Cable
  5. User Manual (this document)

4. Specifications

FeatureSpecification
Brand NameKEBETEME
Lens MaterialGlass
Guiding LineYes (Switchable)
Length of Video Cable6M
Shell MaterialAluminium alloy
Wire or WirelessWire
Alarm TypeAlarm Systems
OriginMainland China
CertificationCE, FCC
Waterproof RatingIP68
Power SupplyDC 12V~24V
Viewing AngleAHD 170°/175°, CVBS 170°/125° (depending on model)
Video SignalAHD (720P/1080P) / CVBS
TV SystemNTSC (CVBS), PAL (AHD1080P)
Comparison of CVBS/AHD720P and AHD1080P camera styles

Image: Comparison of camera styles and specifications (CVBS/AHD720P vs AHD1080P).

5. Setup & Installation

5.1. Wiring Diagram

Follow the wiring diagram below for proper connection:

Wiring diagram for car rear view camera

Image: Wiring diagram showing connections for monitor, video out, power, and control cables.

  • Connect the camera's power cable (red/black) to your vehicle's power source (e.g., reverse light for rear camera).
  • Connect the yellow RCA video output from the camera to the video input of your monitor/head unit.
  • The integrated step-down module supports DC 12V~24V input.
  • Green Cable: Parking line control (cut to switch parking lines on/off).
  • White Cable: Mirror control (cut to switch between rear view (mirroring) and front view (non-mirroring)).
  • Brown Cable: Signal control (cut to switch between AHD and CVBS video signals).

5.2. Physical Installation

The camera supports multiple installation methods (Horizontal / Inverted / Side Mount) and can be used as a rear, front, or side view camera.

Car rear view camera installed on vehicle

Image: Example of camera installed on the rear of a vehicle.

5.3. Camera Angle Adjustment

The camera lens angle is adjustable. Use the provided inner corner wrench to loosen the screw, adjust the angle, and then tighten the screw to secure it.

GIF showing how to adjust camera lens angle

GIF: Demonstration of adjusting the camera lens angle.

5.4. Monitor Settings for AHD Cameras

If you are using an AHD1080P camera, ensure your Android unit or monitor supports AHD1080P. You may need to select the correct video format in your monitor's settings:

  • Go to Car settings >> Factory settings >> Reverse (picture) settings >> Select AHD1080P (e.g., AHD-1080P-30HZ or AHD-1080P-25HZ).
  • If AHD1080P cannot be selected, your monitor does not support AHD1080P cameras.
  • CVBS cameras are universal for all monitors.
Monitor settings for AHD camera selection

Image: Screenshot of monitor settings showing AHD format selection.

6. Operating Instructions

6.1. Video Signal Control (Brown Cable)

The brown cable controls the video signal output. Cut the brown cable to switch between AHD and CVBS signals. Reconnect camera power after cutting.

  • AHD-CVBS720P Camera: Default is AHD (1280x720, 170°). Cutting the brown cable switches to CVBS (1280x720, 170°).
  • AHD1080P Camera: Default is AHD1080P (1920x1080, 175°). Cutting the brown cable switches to CVBS (1280x720, 125°).

6.2. Mirror Control (White Cable)

The white cable controls the image mirroring. Cut the white cable to switch between rear view (mirroring) and front view (non-mirroring). Reconnect camera power after cutting.

  • Default: Rear view camera (mirroring).
  • Cut white cable: Front view camera (non-mirroring).
  • You can also manually rotate the camera sphere angle by 90° to achieve a side camera effect.

6.3. Parking Line Control (Green Cable)

The green cable controls the display of parking lines. Cut the green cable to toggle the parking lines on or off. Reconnect camera power after cutting.

Control cables for mirror, signal, and parking line

Image: Diagram showing the function of white (mirror), brown (signal), and green (parking line) control cables.

6.4. Night Vision

The camera features top starlight night vision, allowing for clear visibility even in low-light conditions. No special operation is required; the camera automatically adjusts for night vision.

Starlight night vision in action

Image: View from the camera demonstrating starlight night vision.

7. Maintenance

  • Cleaning the Lens: Gently wipe the camera lens with a soft, clean cloth to remove dirt or smudges. Avoid abrasive materials that could scratch the lens.
  • Waterproof Design: The camera is IP68-rated waterproof. However, avoid prolonged submersion or high-pressure water jets directly on the lens.
  • Cable Inspection: Periodically check the cables for any signs of wear, damage, or loose connections.

8. Troubleshooting

8.1. Screen Shows "No Signal", Black Screen, or No Picture

  • Check Signal Format: Ensure your monitor is set to the correct signal format (AHD or CVBS) matching your camera.
  • Check Connections: Verify all cables are securely connected. The red trigger line should connect to your reverse light and the monitor's reverse-in cable.
  • AUX-IN: If your monitor has an AUX-IN function, try connecting the camera to it.
  • Cable Integrity: Test with another 6m video cable if available, as a faulty cable can cause signal loss.
  • CVBS Camera Test: CVBS cameras can be tested on a standard TV to verify functionality.

8.2. Screen Shows Black and White (No Color)

  • Incorrect Camera System: Selecting the wrong TV system (PAL/NTSC) can cause a black and white display.
    • CVBS cameras typically use the NTSC system.
    • AHD1080P cameras typically use the PAL system.
    Select the correct system on your monitor and restart the camera power.
  • Cable Integrity: Check the 6m video cable. Replace it with another cable to test if the issue persists.

9. User Tips

  • Always ensure your monitor's video input settings match the camera's output (AHD/CVBS, 720P/1080P) for optimal performance.
  • When switching camera functions (mirror, parking lines, signal type), always disconnect and reconnect the camera's power supply for changes to take effect.
  • For front view applications, remember to cut the white cable to disable mirroring.

10. Compliance Information

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

Certifications: CE, FCC

11. Warranty & Support

Manufacturer Information:

Name: Shenzhen Meiteai E-commerce Co., Ltd

Address: CN-Building A, Building 201A, No. 8-14 Jinyuan Road, He'ao Community, Yuanshan Street, Longgang District, Shenzhen, 518000

Email: qiujianqiang@youyuepin.cn

Telephone: +86-13714205204

EU Authorized Representative:

Name: SUCCESS COURIER SL

Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

Telephone: +34-910602659

Email: successservice2@hotmail.com

For any product-related inquiries or support, please contact the manufacturer or their authorized representative.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.