1. Setup
1.1 Product Overview
The Zemismart MT15B is a smart roller curtain motor designed to automate your blinds. It supports Matter and Thread protocols for seamless integration into various smart home ecosystems.

1.2 Accessory Replacement Guide
The motor comes with parts pre-installed for a 28mm tube. If you are using a different diameter tube (20mm or 25mm), please follow the instructions below to replace the accessories.


To replace accessories:
- Remove the pre-installed 28mm accessory from the motor.
- Select the appropriate accessory for your tube diameter (20mm or 25mm).
- Carefully put the new accessory onto the motor.
- Ensure the accessory is securely fitted before inserting the motor into the tube.
1.3 Motor Installation
Once the correct accessories are attached, insert the motor into your roller blind tube. Ensure it fits snugly and is properly aligned for smooth operation.
1.4 Remote Control Pairing
Two types of remote controls are available: a 1-channel remote and a 16-channel remote. Follow the steps below to pair your remote with the motor.

For 1-channel Remote:
- Press the [Setting button] on the motor for 2 seconds.
- Within 10 seconds, press the [Up] and [Down] buttons on the 1-channel remote once at the same time.
For 16-channel Remote:
- Press the [Setting button] on the motor for 2 seconds.
- Press the [+] button on the 16-channel remote to select a channel.
- Press the [Prg] button on the 16-channel remote within 10 seconds.
1.5 App Connection
To connect the motor to your smart home ecosystem (Apple Home, Google Home, SmartThings), you will need a Matter-compatible smart home hub (Matter Controller) that has Thread Border Router functionality. Your configured WiFi network and the Matter-enabled hub must be in the same local area network (LAN).

- Reset motor: Press the [Setting button] on the motor for 6 seconds. The orange LED will blink 2 times, then the blue LED will blink continuously, indicating it's entering pairing mode.
- Turn on WiFi on your phone.
- Select your preferred smart home app: Apple Home, Google Home, or SmartThings.
- Scan the Matter QR code on the motor and follow the prompts in the app.
1.6 Compatible Matter Controllers / Thread Border Routers
For proper functionality, ensure you have one of the following compatible devices:

- Apple Home: Apple TV 4K (3rd gen, 128 GB), Apple TV 4K (2nd gen), HomePod (2nd gen), HomePod mini
- SmartThings: SmartThings Hub v3 (Aeotec), SmartThings Hub v4, SmartThings Station
- Google Assistant: Nest Hub (2nd gen), Nest Hub Max, Nest wifi, Nest wifi Pro
2. Operating Instructions
2.1 Remote Control Functions
The remote controls allow for manual operation of your roller curtain motor.

1-channel Remote:
- Open/Up: Raises the curtain.
- Stop: Stops the curtain movement.
- Close/Down: Lowers the curtain.
- Fav (Favorite): Single click for 25% limit, Double-click for 50% limit, Long-click for 75% limit.
- Indicator Light: Shows remote status.
16-channel Remote:
- Screen: Displays the selected channel.
- Jog dial: For fine adjustments (details not specified, refer to full PDF manual).
- Stop: Stops the curtain movement.
- Open/Up: Raises the curtain.
- Close/Down: Lowers the curtain.
- Channel - / Channel +: Changes the control channel.
- Setting button: Used for pairing and advanced settings.
2.2 Voice Control
Control your roller curtain motor using voice commands through your smart home assistant (Siri, Google Home, Bixby) once integrated with Apple Home, Google Home, or SmartThings app respectively.

Examples of Voice Commands:
- Siri: "Hey Siri, open the curtains."
- Google Home: "Hey Google, close the curtains."
- Bixby: "Hi Bixby, open 50% of the Curtains."
Video demonstrating voice control of the roller curtain motor.
2.3 Timing Setting
Set automatic working schedules for your curtain motor directly within the smart home app. This eliminates the need for manual control.

3. Maintenance
3.1 Battery Information
The motor features a built-in 800mAh battery. When the battery is low, recharge it using the provided charging method (typically USB). A full charge allows for extended operation.
Remote controls use CR2450 (1-channel) or AAA batteries (16-channel). Batteries are not included in the package for transport safety. Replace them as needed.
3.2 General Care
- Keep the motor and remote controls clean and dry.
- Avoid exposing the device to extreme temperatures or humidity.
- Do not attempt to disassemble the motor, as this may void the warranty.
4. Troubleshooting
4.1 Remote Control Not Working
- Check if the remote control batteries are correctly inserted and have sufficient charge.
- Ensure the remote is within range of the motor.
- Re-attempt the remote pairing process as described in Section 1.4.
4.2 App Connection Issues
- Verify that your Matter-compatible smart home hub (Matter Controller) with Thread Border Router functionality is powered on and connected to your network.
- Ensure your phone's WiFi is on and connected to the same local area network (LAN) as your Matter hub.
- Try resetting the motor by pressing the [Setting button] for 6 seconds until the blue LED blinks continuously, then re-attempt the app connection process (Section 1.5).
- Confirm that the Matter QR code is clean and scannable.
4.3 Motor Not Responding
- Check the motor's battery level and recharge if necessary.
- Perform a motor reset (press [Setting button] for 6 seconds).
- If using a remote, ensure it's paired correctly. If using an app, verify the hub connection.
4.4 Setting Limits
Important: A remote control is required to set the upper and lower limits of the motor. If you are experiencing issues with curtain travel, ensure you are using a paired remote to adjust the limits.
5. Specifications


| Attribute | Value |
|---|---|
| Product Model | MT15B |
| Brand Name | zemismart |
| Origin | Mainland China |
| Input Voltage | DC8.4V |
| Rated Power | 5W |
| Rated Current | 0.6A |
| Rated RPM | 25/30/35rpm |
| Torque | 0.3Nm |
| Battery Capacity | 800mAh |
| Load-bearing | 2KG |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Battery Included | Yes |
| High-concerned chemical | None |
5.1 Package Dimensions
| Dimension | Value |
|---|---|
| Length | 41 cm |
| Width | 11 cm |
| Height | 10 cm |
| Weight | 0.7 kg |
6. User Tips
- Limit Setting: Always use a remote control to set the upper and lower limits for your roller blinds. This cannot be done via the app alone.
- Smart Home Integration: For Matter integration, ensure you have a compatible Matter Controller with Thread Border Router functionality. Without it, the motor cannot connect to smart home ecosystems like HomeKit, Google Home, or SmartThings.
- Network Configuration: When connecting to the app, make sure your smartphone and the Matter-enabled hub are on the same local area network (LAN).
- Battery Management: Keep the motor's built-in 800mAh battery charged for uninterrupted smart control.
7. Warranty and Support
For detailed warranty information, technical support, and further assistance, please refer to the official user manual PDF provided by Zemismart. You can access the PDF manual here.