iJDM Dynamic Amber Turn Signal Side Marker Light

Contents

User Manual: Dynamic Amber LED Side Marker Lights

For 2016-2021 10th Generation Honda Civic Sedan/Coupe/Hatchback

1. Product Overview

Thank you for choosing the iJDM Dynamic Amber LED Side Marker Lights. These lights are designed to enhance the visibility and aesthetic of your Honda Civic with a modern, sequential turn signal function. They are a direct replacement for your vehicle's original side marker lamps.

iJDM Dynamic LED Side Marker Lights for Honda Civic 2016-2021 10th Gen

Figure 1: iJDM Dynamic LED Side Marker Lights for Honda Civic 2016-2021 10th Gen.

Video 1: Demonstration of the dynamic amber turn signal function on a Honda Civic.

Key Features:

  • Dynamic Amber Turn Signal Light
  • 90 Front Facing SMD LEDs for bright illumination
  • Durable ABS Housing, no fade, anti-scratch, waterproof
  • Error-Free Resistor to prevent warning lights
  • Polarized Wiring for correct electrical connection
  • Plug & Play design for simplified installation
  • DOT, SAE, and CE Approved

2. Setup and Installation

Installation may vary slightly depending on your vehicle's specific configuration. Always ensure the vehicle is off and the battery is disconnected before beginning any electrical work.

General Installation Steps:

  1. Access the Light: Depending on the situation, you might need to access the back of the light to release holding clips, use a screwdriver to un-bolt it, or use a pry tool to carefully remove it from the edge.
  2. Remove Stock Components: Remove the stock socket and bulb from the original side marker lamp. Unplug the incandescent bulb from the socket.
  3. Connect LED Adapter: Plug the LED lamp's W5W T10 adapter into the stock socket.
  4. Polarized Wiring: The wiring for these lights is polarized. Ensure positive (+) connects to positive (+) and negative (-) connects to negative (-). Incorrect polarity will prevent the lights from functioning.
  5. Secure Connection: Twist lock the OEM socket back into the LED lamp assembly. This helps prevent water condensation and ensures a secure fit.
  6. Test Functionality: Before fully reassembling, test the lights to ensure they function correctly (parking lights and turn signals).
  7. Reassemble: Carefully reassemble any removed panels or components.
Step-by-step general installation guide for side marker lights

Figure 2: General installation guide showing removal of stock bulb and connection of LED adapter.

Installation guide showing plug-and-play connection and polarized wiring

Figure 3: Visual guide for plug-and-play connection and correct polarized wiring.

Diagram detailing features: Polarized Wiring, Error-Free Resistor, ABS Housing, and 90 Front Facing SMD LEDs

Figure 4: Additional information on wiring, error-free resistor, and LED count.

3. Operating Instructions

Once installed, these LED side marker lights will operate in conjunction with your vehicle's existing lighting system:

  • Parking Lights: When your vehicle's parking lights or headlights are on, the side marker lights will illuminate with a steady amber glow.
  • Turn Signals: When the turn signal is activated, the side marker lights will display a dynamic (sequential) amber flow, indicating your turning intention to other drivers.
Visual representation of the dynamic amber turn signal in action on a Honda Civic

Figure 5: Dynamic amber turn signal in action on a Honda Civic.

Image highlighting the upgraded, brighter dynamic side marker light with sequential amber turn signal

Figure 6: Upgraded version of the dynamic side marker light.

4. Maintenance

These LED side marker lights are designed for durability and minimal maintenance.

  • Cleaning: Clean the lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the ABS housing or lens.
  • Inspection: Periodically check the lights for any signs of damage or loose connections. The ABS housing is designed to be durable, anti-scratch, and waterproof.

5. Troubleshooting

  • Lights Not Working:
    • Check the polarized wiring. Ensure positive (+) is connected to positive (+) and negative (-) to negative (-).
    • Verify all connections are secure and fully seated.
    • Inspect for any pinched or damaged wires.
  • Hyper Flashing or Warning Lights:
    • These lights include an error-free resistor designed to prevent such issues. If you experience hyper flashing or dashboard warning lights, double-check all connections. If the issue persists, consult a professional automotive technician.
  • Water Condensation Inside Lens:
    • Ensure the OEM socket was properly twist-locked back into the LED lamp assembly during installation to create a seal. If condensation occurs, remove the light, dry it thoroughly, and re-seal the connection.

6. Specifications

AttributeSpecification
Brand NameiJDM
Item TypeFender Marker / Side Marker
Model NameFront Side Marker Light
Special FeaturesDynamic Amber Turn Signal Light
Voltage12 V
Wattage3W
Lumens30lm
Interface TypeT10 (W5W/194)
MaterialABS/LED
Housing ColorBlack
Item Weight195g
CertificationsISO9000, CE, ROHS
CompatibilityFor 2016-2021 10th Gen Honda Civic Sedan/Coupe/Hatchback
Reference OE/OEMV134L-B3BGZ, V134R-B3BGZ, 34300-TET-H01, 34350-TET-H01
Comparison of Clear Lens and Smoked Lens options for the side marker lights

Figure 7: Available lens options: Clear Lens and Smoked Lens.

7. User Tips

  • Secure Fit: While the plug-and-play design is convenient, some users note a slight wiggle when slotted in. Ensure the unit is securely fastened and the twist-lock mechanism is fully engaged to prevent movement and moisture ingress.
  • Polarity Check: If the lights do not illuminate upon initial testing, the most common cause is incorrect polarity. Reverse the connection of the wires to ensure positive connects to positive and negative to negative.
  • Professional Installation: If you are uncomfortable with automotive electrical work, it is recommended to seek professional installation to ensure proper function and avoid damage.

8. Warranty and Support

For any warranty claims, technical support, or questions regarding your iJDM Dynamic Amber LED Side Marker Lights, please contact the seller or retailer from whom you purchased the product. Please refer to your purchase documentation for specific warranty terms and contact information.

An additional user manual in PDF format may be available for download at: User Manual (PDF)

© 2023 iJDM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.