1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your FastDeng LED Floodlight with PIR Motion Sensor. Please read this manual thoroughly before use to ensure safe and efficient operation of the product.
2. Safety Precautions
Warning: Read carefully before installation and use.
- Always cut off the power before installing or performing maintenance on the floodlight.
- Do not place the power interface in a damp environment or expose it to water. The power cord interface is not waterproof.
- Keep away from children, pets, and flammable materials.
- Do not cut, splice, or modify cables at will.
- This product is designed for AC 220V power supply and cannot be used with 110V.
- Before installation, cleaning, or maintenance, always disconnect the power supply.
3. Product Specifications
| Attribute | Specification |
|---|---|
| Product Name | Motion Sensor Flood Light |
| Model Number | SMD2835 |
| Voltage | AC175V-265V |
| Power Options | 10W, 20W, 30W, 50W, 100W |
| LED Chip Model | SMD 2835 |
| Waterproof Grade | IP66 (Not submersible) |
| Color Rendering Index | Ra80 |
| Light Color | White 6000K |
| Beam Angle | 120° |
| Lifespan | 50,000 Hours |
| Working Temperature | ~20°C–50°C |
| Housing Material | Aluminum + Explosion proof glass |
| Control Method | Infrared Remote Control (Batteries not included) |
| Power Source | AC |
| Bulbs Included | Yes |
| Certifications | CE, ROHS |
Luminous Flux and Chip Quantity by Wattage:
| Watts | Luminous Flux (Lm) | Chip Quantity (pcs) | Product Size (mm) |
|---|---|---|---|
| 10W | 900Lm | 12 | 104 x 85 x 23 |
| 20W | 1800Lm | 24 | 121 x 97 x 24 |
| 30W | 2700Lm | 36 | 160 x 120 x 28 |
| 50W | 4500Lm | 72 | 204 x 159 x 30 |
| 100W | 9000Lm | 144 | 204 x 211 x 34 |
4. Package Contents
The package should contain the following items:
- LED Floodlight with integrated PIR Motion Sensor
- Infrared Remote Control (AAA batteries not included)
- Mounting bracket and screws
5. Setup and Installation
Follow these steps to install your LED Floodlight:
- Prepare for Installation: Ensure the power supply is cut off before beginning installation.
- Mount the Bracket: Fix the adjustable metal bracket to the desired surface (wall, ceiling, etc.) using appropriate screws. It is recommended not to install on the ground, as this may affect the induction effect.
- Connect Wiring: Connect the mains cable to the wiring port of the floodlight. Observe the standard wiring color code:
- Yellow wire: Ground
- Brown wire: Live wire
- Blue wire: Neutral wire
- Secure the Floodlight: Once wired, fix the floodlight to the bracket at the desired angle using screws. The bracket allows for up and down adjustment by 180° and left and right adjustment by 270°.
6. Operating Instructions
The floodlight can be operated using the included infrared remote control. Ensure AAA batteries are inserted into the remote control (not included).
Remote Control Functions:
- ON: Press to enter manual long output (constant light) mode.
- OFF: Press to turn off the floodlight.
- AUTO: Press to enter motion auto-sensing function mode.
- Light Control Function:
- Sun icon: Switches off the light control function to illuminate the whole day (day mode).
- Moon icon: Operates when ambient brightness is below 20LUX (night mode).
- Sensing Time Settings: In AUTO mode, select the desired illumination duration after motion detection:
- 10S (10 seconds)
- 30S (30 seconds)
- 2Min (2 minutes)
- 5Min (5 minutes)
- 10Min (10 minutes)
- Sensing Distance Adjustment: The sensing distance is approximately 2-8 meters.
- Left ripple button: Sets the maximum sensing distance (approx. 8 meters).
- Right ripple button: Sets the minimum sensing distance (approx. 2 meters).
7. Care and Maintenance
- Gently wipe the floodlight with a dry cloth or a slightly damp soft cloth. Do not use chemical cleaners.
- Store in a dry place when not in use for extended periods.
- Do not forcefully pull or twist the power cord.
- Regularly check the mounting screws and bracket for tightness, especially after severe weather conditions.
8. Troubleshooting
- Light not turning on:
- Check if the power supply is connected and active (220V).
- Ensure the remote control batteries are correctly inserted and not depleted.
- Verify the remote control is set to 'ON' or 'AUTO' mode.
- In 'AUTO' mode, check if the light control setting (sun/moon icon) is appropriate for the ambient light conditions.
- Motion sensor not detecting:
- Ensure the sensor is not obstructed.
- Adjust the sensing distance using the remote control.
- Check for external heat sources or moving objects (e.g., tree branches) that might interfere with the sensor.
- Light flickers or dims:
- Ensure stable power supply.
- Check for loose wiring connections.
9. User Tips
No specific user tips from reviews or Q&A are available at this time. However, general advice for optimal performance includes:
- For best motion detection, mount the floodlight in a location where the sensor has a clear, unobstructed view of the area you wish to monitor.
- Experiment with the sensing time settings (10S, 30S, 2Min, 5Min, 10Min) to find the duration that best suits your needs and conserves energy.
- Utilize the 'Moon' mode for automatic night-time operation to save energy during daylight hours.
10. Warranty and Support
For after-sales service, please contact the official customer service of your retailer and provide proof of purchase. Keep your purchase receipt or invoice in a safe place.