iJDM Dynamic LED Side Marker Turn Signal Lights

Contents

iJDM Dynamic LED Side Marker Turn Signal Lights User Manual

Brand: iJDM

Model: Dynamic LED Side Marker Turn Signal Lights

1. Introduction

Thank you for choosing iJDM Dynamic LED Side Marker Turn Signal Lights. This product is designed to enhance the safety and aesthetics of your vehicle by providing a modern and dynamic LED appearance with sequential flash turn signal features. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new lights.

Your package includes one pair of driver and passenger side dark smoked lens amber LED side marker lamps. Each side marker is powered by 36 high-power amber SMD LED diodes to form a perfect strip with a sequential flash turn signal feature. The LED side marker lamps feature a direct plug-and-play installation.

Product demonstration video showcasing the iJDM Dynamic LED Side Marker Turn Signal Lights in operation, highlighting the sequential amber flash.

2. Features

  • 100% Brand new and high quality construction
  • Dark smoke lens for a sleek appearance
  • Amber LED color with sequential flash functionality
  • Powered by high-power amber SMD LED diodes for a perfect focal strip
  • Built-in CAN-bus system ensures error-free operation
  • Plug and play installation, no modifications required
  • DOT SAE approved for compliance and safety
  • Direct replacement for original amber lens side marker lamps
  • Provides a modern and dynamic LED appearance with enhanced safety and visibility at night

3. Specifications

Attribute Value
Type of Lights LED front side marker lights / fender flare lamps
Material Durable Black ABS Housing / LED
Waterproof Rating IP67
Lens Color Smoked
Light Color Amber
Installation Position Front Side Marker Lamps
Replace OEM Numbers 923032H000, 923033L100, 923102H000, 923113L100, 92303-3L100
Sealing Ultrasonically sealed
Work Temperature -40 - 60 ℃
Voltage 12-24V DC
Power 3W
Lumens 30lm
Item Weight 60g
Item Diameter 0 inch
Interface Type T10 (W5W/194)
Dimensions (Length x Width) 3.23 inches (82mm) x 1.22 inches (31mm)

Low power consumption; Quick Instant Start-Up time.

Comparison image showing the LED side marker light as an upgrade from stock lights, with dimensions and performance metrics.

Comparison image showing the LED side marker light as an upgrade from stock lights, with dimensions (3.23 inches / 82mm length, 1.22 inches / 31mm width) and performance metrics (5x light output, 70% less energy, 10x longer life).

4. Vehicle Compatibility

These LED side marker lights are compatible with a range of Kia and Hyundai models. Please verify your vehicle's make, model, and year, and compare with the provided OEM part numbers to ensure proper fitment.

For Kia:

  • Kia Cee'D I hatchback (ED) 2006-2012
  • Kia Cee'D I Station Wagon (ED) 2007-2012
  • Kia Pro Ceed I Hatchback (ED) 2008-2013
  • Kia Carens II (UN) 2006-2013
  • Kia Rondo & Rondo 7 (UN) 2007-2012
  • Kia Rio Tinto III hatchback (UB) 2011-2016
  • Kia Rio Tinto III Salon (UB) 2011-2016

For Hyundai:

  • Hyundai i30 hatchback (FD) 2007-2011
  • Hyundai i30 CW Station Wagon (FD) 2007-2012
  • Hyundai Grandeur MK4 (TG) 2006-2011
  • Hyundai Avante (HD) 2007-2010
  • Hyundai Elantra Touring (FD) 2009-2012

Note: To ensure the item fits your vehicle properly, please check our fitting tab, pictures, and your vehicle's stock OEM part number information carefully. Note your model name and year when ordering.

iJDM Dynamic LED Side Marker Lights installed on a blue car, highlighting the amber turn signal. Includes compatible car models and OEM part numbers.

iJDM Dynamic LED Side Marker Lights installed on a blue car, highlighting the amber turn signal. Includes compatible car models and OEM part numbers.

The iJDM LED side marker light installed on a Hyundai Elantra Touring, showcasing its appearance.

The iJDM LED side marker light installed on a Hyundai Elantra Touring, showcasing its appearance.

The iJDM LED side marker light installed on a Kia Ceed, demonstrating fitment.

The iJDM LED side marker light installed on a Kia Ceed, demonstrating fitment.

5. Installation Guide

The installation process is designed to be plug-and-play. Depending on your vehicle, you might need to access the back of the light to release clips, use a screwdriver to un-bolt, or a pry tool to remove the existing light from the edge.

General Installation Steps:

  1. Remove Stock Socket and Bulb: Carefully remove the OEM license plate light housing from your vehicle. If possible, use a plastic trim tool to prevent damage.
  2. Unplug the Incandescent Bulb: Remove the factory plug from the OEM light housing.
  3. Plug in the LED Lamp's W5W T10 Adapter: Insert our connector back into the stock socket.
  4. Twist Lock Back the OEM Socket: Twist and lock the OEM socket back to the LED lamp to prevent any water condensation. Install the new LED license plate light back onto the vehicle.
Detailed step-by-step visual guide for installing the LED side marker lights, showing removal of stock bulb, unplugging, plugging in LED adapter, and twisting to lock.

Detailed step-by-step visual guide for installing the LED side marker lights, showing removal of stock bulb, unplugging, plugging in LED adapter, and twisting to lock.

Wiring Information:

The lights feature polarized wiring. Connections matter, so positive (+) needs to connect to positive (+) and negative (-) to negative (-). Be sure the connections are correct. Just locate the parking and signal light wiring on your tail light and you are ready to splice.

An error-free resistor is built-in to reduce the flow of electricity back to the vehicle, canceling any warning lights.

Diagram detailing the internal components and wiring of the LED side marker light, showing 18 front-facing SMD LEDs, polarized wiring, and an error-free resistor.

Diagram detailing the internal components and wiring of the LED side marker light, showing 18 front-facing SMD LEDs, polarized wiring, and an error-free resistor.

Illustration of the plug-and-play installation process for the LED side marker, emphasizing polarized wiring connections.

Illustration of the plug-and-play installation process for the LED side marker, emphasizing polarized wiring connections.

6. Operation

Once installed, the iJDM Dynamic LED Side Marker Turn Signal Lights operate automatically with your vehicle's turn signal system. When the turn signal is activated, the amber LEDs will illuminate in a sequential flash pattern, providing clear indication to other drivers.

Sequential amber yellow LED turn signal light in action, demonstrating the dynamic flash pattern.

Sequential amber yellow LED turn signal light in action, demonstrating the dynamic flash pattern.

7. Maintenance

These LED side marker lights are designed for durability and require minimal maintenance. Keep the lens clean from dirt and debris using a soft cloth and mild automotive cleaner. Avoid abrasive materials or harsh chemicals that could damage the lens or housing.

The ultrasonically sealed design and IP67 waterproof rating ensure protection against environmental elements, reducing the need for internal maintenance.

8. Troubleshooting

The iJDM Dynamic LED Side Marker Turn Signal Lights are designed with a built-in CAN-bus system and error-free resistor to prevent common issues. However, if you encounter any problems, consider the following:

  • Lights not illuminating: Check the wiring connections to ensure they are secure and correctly polarized (+ to + and - to -). Verify that the vehicle's turn signal system is functioning correctly.
  • Flickering or inconsistent light: Recheck all connections for looseness. Ensure the adapter is fully seated in the stock socket.
  • Warning lights on dashboard: While designed to be error-free, if a warning light appears, double-check the installation steps and wiring. Ensure the error-free resistor is properly integrated.
  • Water condensation: Ensure the OEM socket is twisted and locked back securely to the LED lamp to prevent moisture ingress.

If issues persist, please consult a professional automotive technician.

9. User Tips

  • When removing the original side markers, use a plastic pry tool to avoid scratching your vehicle's paint.
  • Always ensure the vehicle's ignition is off and the battery is disconnected before performing any electrical work.
  • Test the lights before fully reassembling the housing to confirm proper function.
  • For optimal visibility, keep the smoked lens clean from road grime and dirt.

10. Warranty and Support

iJDM is committed to providing high-quality automotive lighting products. All items are tested before shipping. If the item is defective when you receive it or you are not satisfied with it, please contact us for a replacement or refund. No accepting to return the electronic components.

For further assistance or inquiries, please contact iJDM Official Store customer support.

A user manual in PDF format is also available for download: View User Manual (PDF)

© 2023 iJDM Official Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.